Table of Contents
Advertisement
Figure 55. Removing the system board
Next steps
Install the system
board.
Installing the system board
Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in
3. If you are replacing the system board, remove all the components that are listed in the
Steps
1. Unpack the new system board assembly.
NOTE:
Do not lift the system board by holding a memory module, the processor, or any other components.
CAUTION:
Take care not to damage the system identification button while placing the system board into the
chassis.
2. Holding the blue holder, incline the system board at an angle and align the connectors on the system board with the slots on
the system, and lower the system board into the system.
Safety
instructions.
Before working inside your
system.
Installing and removing system components
removing the system board
section.
63
Advertisement
Table of Contents
