Table of Contents
Advertisement
notch
lever
tab
card clip
AGP connector
Installing a Video Card
NOTICE: You must use low-profile cards for your computer. A full-size card
can damage the computer or the card.
To add or replace the card, press the card lever toward the PCI
1
connector and gently press the card into the AGP connector until it
clicks into place.
Release the card lever, ensuring that the tab fits into the notch on the
2
front end of the card.
Secure the card by lowering the hinged lever on the back panel.
3
Close the computer cover (see page 92).
4
Attach the computer stand (see page 21).
5
NOTICE: To connect a network cable, first plug the cable into the network
wall jack and then plug it into the computer.
Connect your computer and devices to electrical outlets, and turn
6
them on.
PCI connector
back of computer
HINT: If you purchased
the optional video card,
ensure that you connected
your monitor cable to the
correct video connector.
89
Adding Pa rts
Advertisement
Table of Contents
