Control Codes; Cable Connection - NEC X462S Installation Manual

46” led-backlit super-slim professional-grade large-screen display

Hide thumbs Also See for X462S:

Table of Contents

X462S Installation Guide

46" LCD Display

Control Codes:

NOTE: Contact your NEC rep for codes not listed.

NOTE: Use a cross/reverse/null modem cable.

Communication Protocol:

Interface:

RS-232C

Communication: Asynchronous

Baud Rate:

9600 bps

Data Length:

8 bits

PC Control Connector (D-Sub 9P)

NOTE: If so desired, jumper "Request to send" and "Clear to Send" together on both ends of the cable to simplify cable connection.

These connections are not required. The only connections required are pins 2 (TxD), 3 (RxD) and 5 (GND).

www.necdisplay.com

Parity:

None

Stop Bit: 1 bit

Communication Code: Hex

NEC Display Solutions of America, Inc.

X462S

Rev 1.0

Page 8 of 8

Table of Contents