hit counter script
NEC NP600 User Manual
  1. Manuals
  2. Brands
  3. NEC Manuals
  4. Projector
  5. NP600 Series
  6. User manual

NEC NP600 User Manual

Hide thumbs Also See for NP600:
Table of Contents

Advertisement

Quick Links

See also: Service Manual Supplement , Command Manual
Portable Projector
NP600/NP500/NP400
NP500W
User's Manual
The projector's model name indicated on the projector's label is
NP600, NP500, NP400, NP500W, NP600G, NP500G, NP400G, and
NP500WG respectively.
All the models are referred to as NP600, NP500, NP400, and NP500W
throughout the user's manual except some of the specification
pages.

Advertisement

Table of Contents
loading

Related Manuals for NEC NP600

Summary of Contents for NEC NP600

  • Page 1 The projector’s model name indicated on the projector’s label is NP600, NP500, NP400, NP500W, NP600G, NP500G, NP400G, and NP500WG respectively. All the models are referred to as NP600, NP500, NP400, and NP500W throughout the user’s manual except some of the specification pages.
  • Page 2 (3) Great care has been taken in the preparation of this user’s manual; however, should you notice any questionable points, errors or omissions, please contact us. (4) Notwithstanding article (3), NEC will not be responsible for any claims on loss of profit or other matters deemed to result from using the Projector.

  • Page 3: Safety Cautions

    Important Information Safety Cautions Precautions Please read this manual carefully before using your NEC NP600/NP500/NP400/NP500W projector and keep the manual handy for future reference. CAUTION To turn off main power, be sure to remove the plug from power outlet. The power outlet socket should be installed as near to the equipment as possible, and should be easily accessible.

  • Page 4: Important Safeguards

    The Federal Communications Commission does not allow any modifications or changes to the unit EXCEPT those specified by NEC Display Solutions of America, Inc. in this manual. Failure to comply with this government regu- lation could void your right to operate this equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
  • Page 5 • Do not touch the power plug during a thunderstorm. Doing so can cause electrical shock or fire. • The projector is designed to operate on a power supply of 100-240V AC 50/60 Hz (NP600/NP500/NP400/NP500W) or 200-240V AC 50/60 Hz (NP600G/NP500G/NP400G/NP500WG). Ensure that your power supply fits this require- ment before attempting to use your projector.
  • Page 6 Important Information CAUTION • Do not use the tilt-foot for purposes other than originally intended. Misuses such as gripping the tilt-foot or hang- ing on the wall can cause damage to the projector. • Do not send the projector in the soft case by parcel delivery service or cargo shipment. The projector inside the soft case could be damaged.
  • Page 7 Important Information About High Altitude mode • Set [FAN MODE] to [HIGH ALTITUDE] when using the projector at altitudes approximately 5500 feet/1600 meters or higher. Using the projector at altitudes approximately 5500 feet/1600 meters or higher without setting to [HIGH ALTITUDE] can cause the projector to overheat and the protector could shut down.

  • Page 8: Table Of Contents

    Table of Contents Important Information ....................i 1. Introduction ......................1 1 What’s in the Box? ......................1  Introduction to the Projector ..................2 Congratulations on Your Purchase of the Projector ..........2 Features you’ll enjoy: ....................2 About this user’s manual ..................3 ...
  • Page 9 Table of Contents 7 Turning off the Projector ....................32  After Use........................33 4. Convenient Features ..................34 1 Turning off the Image and Sound ................34  Freezing a Picture ....................... 34  Enlarging a Picture ...................... 34 ...

  • Page 10: Important Information

    1. Introduction 1 What’s in the Box? Make sure your box contains everything listed. If any pieces are missing, contact your dealer. Please save the original box and packing materials if you ever need to ship your projector. Projector Lens cap (24F44681) Soft case (24BS7582)

  • Page 11: Introduction To The Projector

    Auto Keystone feature allows the projector to detect its tilt and correct vertical distortion automatically. • LCD projector wth hgh resoluton and hgh brghtness High resolution display - up to UXGA compatible, XGA (NP600/NP500/NP400)/WXGA (NP500W) native resolu- tion. • Sx pcture preset modes for user adjustable pcture and color settngs...

  • Page 12: About This User's Manual

    1. Introduction • Preventng unauthorzed use of the projector Enhanced smart security settings for keyword protection, cabinet control panel lock, security slot, and security chain opening to help prevent unauthorized access, adjustments and theft deterrence. • PC Control Port You can control the projector with a PC or control system using the PC Control port. •...

  • Page 13: Part Names Of The Projector

    1. Introduction  Part Names of the Projector Front/Top Controls (→ page 5) Zoom Lever (→ page 27) Security chain opening Attach an anti-theft device. The security chain opening accepts se- Focus Ring curity wires or chains up to 0.18 inch/ (→...

  • Page 14: Top Features

    1. Introduction Top Features MENU SELECT LAMP STATUS SOURCE AUTO ADJ. 1 2 5 (POWER) Button (→page 22, 32) . POWER Indcator (→page 22, 32, 75) . STATUS Indcator (→page 75) 4. LAMP Indcator (→page 72, 75) 5. SOURCE Button (→page 24) 6.

  • Page 15: Terminal Panel Features

    1. Introduction Terminal Panel Features . COMPUTER  IN/ Component Input Connector (Mn D-Sub 5 Pn) (→page 13,16,18) . COMPUTER  (DVI-I) IN Connector (9 Pn) (HDCP compatble) (→page 15,16) . AUDIO IN Mn Jack (Stereo Mn) (→page 13,15,18) 4. AUDIO OUT Mn Jack (Stereo Mn) (→page 17) 5.

  • Page 16: Part Names Of The Remote Control

    1. Introduction  Part Names of the Remote Control POWER MAGNIFY PIC-MUTE PAGE DOWN MENU ENTER EXIT L-CLICK R-CLICK MOUSE VIDEO COMPUTER COMPUTER AUTO ADJ. S-VIDEO LAMP MODE VOLUME ASPECT HELP PICTURE FREEZE . MOUSE R-CLICK Button* (→ page 39,40) .

  • Page 17: Battery Installation

    1. Introduction Battery Installation Press firmly and slide the Install new batteries (AAA). En- Slip the cover back over the bat- battery cover off. sure that you have the batteries’ teries until it snaps into place. Do polarity (+/–) aligned correctly. not mix different types of batteries or new and old batteries.

  • Page 18: Installation And Connections

    1 Setting Up the Screen and the Projector Selecting a Location [NP600/NP500/NP400] The further your projector is from the screen or wall, the larger the image. The minimum size the image can be is approximately 21" (0.53 m) measured diagonally when the projector is roughly 30 inches (0.8 m) from the wall or screen.
  • Page 19 2. Installation and Connections [NP500W] The further your projector is from the screen or wall, the larger the image. The minimum size the image can be is approximately 21" (0.53 m) measured diagonally when the projector is roughly 28 inches (0.7 m) from the wall or screen.

  • Page 20: Throw Distance And Screen Size

    (top of screen for ceiling ap- Screen center plication) α = Throw angle Lens center α NOTE: The values in the tables are design values and may vary. Screen bottom Projector bottom [NP600/NP500/NP400] α Screen Size Diagonal Width Height wide tele wide tele...
  • Page 21 Contact your NEC dealer if you need a mirror * Do not attempt to install the projector yourself. system. If you’re using a mirror system and your image •...

  • Page 22: Making Connections

    Usually, the combination of the ‘Fn” key along with one of the 12 function keys gets the external display to come on or off. For example, NEC laptops use Fn + F3, while Dell laptops use Fn + F8 key combinations to toggle through external display selections.
  • Page 23 COMPUTER 2(ANALOG) (COMPUTER 2) NOTE: The projector is not compatible with video decoded outputs of the NEC ISS-6020 switcher. NOTE: An image may not be displayed correctly when a Video or S-Video source is played back via a commercially available scan converter.

  • Page 24: When Viewing A Dvi Digital Signal

    2. Installation and Connections When Viewing a DVI Digital Signal To project a DVI digital signal, be sure to connect the PC and the projector using a DVI cable (not supplied) before turning on your PC or projector. Turn on the projector first and select Computer 2 (Digital) from the source menu before turning on your PC.

  • Page 25: Using Two Analog Computer Inputs Simultaneously

    2. Installation and Connections Using Two Analog COMPUTER Inputs Simultaneously If you need to use two analog COMPUTER inputs simultaneously, connect a VGA signal cable as shown below. COMPUTER 2 (DVI-I) IN COMPUTER 1 IN IBM PC or Compatibles (Desktop type) or Macintosh (Desktop type) DVI to VGA adapter VGA signal cable...

  • Page 26: Connecting An External Monitor

    2. Installation and Connections Connecting an External Monitor AUDIO OUT MONITOR OUT (COMP 1) VGA signal cable (not supplied) VGA signal cable (sup- plied) AUDIO PHONE You can connect a separate, external monitor to your projector to simultaneously view on a monitor the computer analog image you’re projecting.

  • Page 27: Connecting Your Dvd Player With Component Output

    2. Installation and Connections Connecting Your DVD Player with Component Output COMPUTER 1 IN AUDIO IN 15-pin - to - RCA (fe- male) 3 cable adapter (ADP-CV1E) Audio Equipment Component video RCA3 AUDIO IN cable (not supplied) DVD player Audio cable (not supplied) AUDIO OUT Component A component signal will be automatically displayed.

  • Page 28: Connecting Your Vcr

    2. Installation and Connections 2. Installation and Connections Connecting Your VCR S-VIDEO IN AUDIO IN VIDEO IN S-Video cable (not supplied) Audio cable (not supplied) Video cable (not supplied) Audio equipment VIDEO S-VIDEO AUDIO IN AUDIO OUT VIDEO OUT Audio cable (not supplied) •...
  • Page 29 2. Installation and Connections Connectng to a Network The projector comes standard with a LAN port (RJ-45) which provides a LAN connection using a LAN cable. Using a LAN cable allows you to specify the Network Settings and the Alert Mail Settings for the projector over a LAN. To use a LAN connection, you are required to assign an IP address to the projector on the [PROJECTOR NETWORK SETTINGS] screen of the web browser on your computer.

  • Page 30: Connecting The Supplied Power Cable

    2. Installation and Connections Connecting the Supplied Power Cable Connect the supplied power cable to the projector. First connect the supplied power cable’s two-pin plug to the AC IN of the projector, and then connect the other plug of the supplied power cable in the wall outlet. LAMP STATUS SOURCE...

  • Page 31: Projecting An Image (Basic Operation)

    ASPECT POWER MENU NOTE: When no signal is available, the NEC logo, blue (default), or black screen will be displayed. When the projector displays the NEC logo, a blue or black screen, the projector will automatically switch Standby Blinking Power On to the ECO mode.

  • Page 32: Note On Startup Screen (Menu Language Select Screen)

    3. Projecting an Image (Basic Operation) Note on Startup screen (Menu Language Select screen) When you first turn on the projector, you will get the Startup menu. This menu gives you the opportunity to select one of the 21 menu languages. To select a menu language, follow these steps: 1.

  • Page 33: Selecting A Source

    3. Projecting an Image (Basic Operation)  Selecting a Source Selecting the computer or video source NOTE: Turn on the computer or video source equipment connected to the projector. Selectng from Source Lst MENU Press and quickly release the SOURCE button on the projector cabinet to SELECT display the Source list.

  • Page 34: Adjusting The Picture Size And Position

    3. Projecting an Image (Basic Operation)  Adjusting the Picture Size and Position Use the adjustable tilt foot, the zoom lever or the focus ring to adjust the picture size and position. In this chapter drawings and cables are omitted for clarity. Adjusting the throw angle (the height of an image) Adjusting the left and right tilt of an image [Tilt foot] (→...

  • Page 35: Adjust The Tilt Foot

    3. Projecting an Image (Basic Operation) Adjust the Tilt Foot 1. Lift the front edge of the projector. CAUTION: Do not try to touch the ventilation outlet during Tilt Foot adjustment as it can become heated while the projector is turned on and during its cool down period after it is turned off.

  • Page 36: Zoom

    3. Projecting an Image (Basic Operation) Zoom Use the ZOOM lever to adjust the image size on the screen. Zoom Lever Focus Use the FOCUS ring to obtain the best focus. Focus Ring...

  • Page 37: Correcting Keystone Distortion

    3. Projecting an Image (Basic Operation)  Correcting Keystone Distortion Correcting Keystone Distortion If the screen is tilted vertically, keystone distortion becomes large. Proceed with the following steps to correct keystone distortion NOTE: • The Keystone correction can cause an image to be slightly blurred because the correction is made electronically. •...

  • Page 38: Adjusting With The Remote Control

    3. Projecting an Image (Basic Operation) Adjusting with the Remote Control 1. Press the MENU button. The menu will be displayed. 2. Press the SELECT  button to select [SETUP] and press the ENTER button. The [GENERAL] screen will be displayed. 3.

  • Page 39: Adjusting With The Auto Keystone Function

    3. Projecting an Image (Basic Operation) Adjusting with the Auto Keystone Function The Auto Keystone correction feature will correct the vertical distortion of a projected image on the screen. No special operation required. Just put the projector on a flat surface. TIP: Even when the menu setting for [AUTO KEYSTONE] is turned on, [KEYSTONE] can be adjusted manually.

  • Page 40: Optimizing Computer Signal Automatically

    3. Projecting an Image (Basic Operation)  Optimizing Computer Signal Automatically Adjusting the Image Using Auto Adjust Optimizing a computer image automatically. Press the AUTO ADJ. button to optimize a computer image automatically. This adjustment may be necessary when you connect your computer for the first time. [Poor picture] MENU L-CLICK...

  • Page 41: Turning Off The Projector

    3. Projecting an Image (Basic Operation) 7 Turning off the Projector To turn off the projector: MENU 1. First, press the (POWER) button on the projector POWER MAGNIFY PIC-MUTE PAGE cabinet or the POWER OFF button on the remote con- SELECT trol.

  • Page 42: After Use

    3. Projecting an Image (Basic Operation)  After Use Preparaton: Make sure that the projector s turned off. 1. Unplug the power cable. 2. Disconnect any other cables. 3. Retract adjustable tilt foot if extended. 4. Cover the lens with the lens cap. 5.

  • Page 43: Convenient Features

    4. Convenient Features 1 Turning off the Image and Sound Press the PIC-MUTE button to turn off the image and sound for a short period of time. Press again to restore the image and sound. POWER MAGNIFY PIC-MUTE PAGE SELECT DOWN NOTE: MENU...

  • Page 44: Changing Lamp Mode

    4. Convenient Features 2. Press the SELECT  button. The area of the magnified image will be moved 3. Press the MAGNIFY (-) button. Each time the MAGNIFY (-) button is pressed, the image is reduced. POWER MAGNIFY PIC-MUTE PAGE NOTE: DOWN •...

  • Page 45: Preventing The Unauthorized Use Of The Projector [Security]

    4. Convenient Features  Preventing the Unauthorized Use of the Projector [SECURITY] A keyword can be set for your projector using the Menu to avoid operation by an unauthorized user. When a keyword is set, turning on the projector will display the Keyword input screen. Unless the correct keyword is entered, the pro- jector cannot project an image.
  • Page 46 4. Convenient Features 7. Type in the same combination of SELECT  buttons and press the ENTER button. The confirmation screen will be displayed. 8. Select [YES] and press the ENTER button. The SECURITY function has been enabled. To turn on the projector when [SECURITY] s enabled: When the SECURITY function is enabled and the projector is turned on, the projector will display a blue back- ground.
  • Page 47 4. Convenient Features To dsable the SECURITY functon: 1. Press the MENU button. The menu will be displayed. 2. Select [SETUP] → [INSTALLATION] → [SECURITY] and press the ENTER button. The OFF/ON menu will be displayed. 3. Select [OFF] and press the ENTER button. The KEYWORD CONFIRMATION screen will be displayed.

  • Page 48: Using The Optional Remote Mouse Receiver (Np01Mr)

    4. Convenient Features  Using the Optional Remote Mouse Receiver (NP01MR) The optional remote mouse receiver enables you to operate your computer’s mouse functions from the remote control. It is a great convenience for clicking through your computer-generated presentations. Connectng the remote mouse recever to your computer If you wish to use the remote mouse function, connect the mouse receiver and computer.

  • Page 49: About Drag Mode

    4. Convenient Features Operatng your computer’s mouse from the remote control You can operate your computer’s mouse from the remote control. PAGE UP/DOWN Button: scrolls the viewing area of the window or to move to the previous or next slide in Power- Point on your computer.

  • Page 50: Network Setting By Using An Http Browser

    IP address of the projector has been set in the “HOSTS” file of the computer being used. Example 1: When the host name of the projector has been set to “pj.nec.co.jp”, access is gained to the network setting by specifying http://pj.nec.co.jp/index.html...

  • Page 51: Network Settings

    4. Convenient Features Network Settings http://<the projector’s IP address> /index.html DHCP........Enabling.this.option.automatically.assigns.an.IP.address.to.the.projector.from.your.DHCP.server.. Disabling.this.option.allows.you.to.register.the.IP.address.or.subnet.mask.number.obtained.from. your.network.administrator. NOTE: The IP address of the projector is required to change the network setting. The IP address will not be displayed on the projector’s menu. Consult your network administrator for the IP address when [ENABLE] is selected for [DHCP].
  • Page 52 4. Convenient Features Alert Mal Settng http:// <the projector’s IP address>/lanconfig.html This option notifies your computer of an error message via e-mail when using wired LAN. An error message notification will be sent when the projector lamp has reached the end of its usable life or an error occurs in the projector. HOST NAME ......

  • Page 53: Using The Vga Signal Cable To Operate The Projector (Virtual Remote)

    The optional utility software “Virtual Remote Tool” designed exclusively for our projector is required to use DDC/CI. Check with our website. http://www.nec-pj.com NOTE: Use the supplied VGA signal cable to connect the COMPUTER 1 IN connector directly with the monitor output connector of the computer to use Virtual Remote Tool.

  • Page 54: Using On-Screen Menu

    5. Using On-Screen Menu 1 Using the Menus NOTE: The on-screen menu may not be displayed correctly while interlaced motion video image is projected. 1. Press the MENU button on the remote control or the projector cabinet to display the menu. NOTE: The commands such as ENTER, EXIT, , ...

  • Page 55: Menu Elements

    5. Using On-Screen Menu 2 Menu Elements Slide bar Solid triangle Available buttons Source Highlight Radio button High Altitude symbol Thermometer symbol Off Timer remaining time Key Lock symbol Menu windows or dialog boxes typically have the following elements: Highlight......Indicates.the.selected.menu.or.item.. Solid.triangle.......Indicates.further.choices.are.available..A.highlighted.triangle.indicates.the.item.is.active..

  • Page 56: List Of Menu Items

    COLOR RESET CLOCK PHASE HORIZONTAL VERTICAL OVERSCAN 0[%], 5[%], 10[%] IMAGE NP600/NP500/NP400:AUTO, 4:3, 16:9, 15:9, 16:10, OPTIONS WIDE ZOOM, NATIVE ASPECT RATIO NP500W: AUTO, 4:3, 16:9, 15:9, 16:10, LETTERBOX, NATIVE POSITION (Not available on NP500W) VIDEO FILTER OFF, LESS, MORE...
  • Page 57 AUTO, NTSC3.58, NTSC4.43, PAL, PAL-M, PAL-N, SELECT VIDEO AUTO OPTIONS(1) PAL60, SECAM AUTO, NTSC3.58, NTSC4.43, PAL, PAL-M, PAL-N, S-VIDEO AUTO PAL60, SECAM NP600/NP500/ SETUP WXGA MODE NP400: OFF OFF, ON NP500W: ON DEINTERLACE OFF, ON BEEP OFF, ON OFF TIMER...

  • Page 58: Menu Descriptions & Functions [Source]

    5. Using On-Screen Menu  Menu Descriptions & Functions [SOURCE] COMPUTER Selects the computer connected to your COMPUTER 1 IN input connector. NOTE: • When the component input signal is connected to the COMPUTER 1 IN connector, select [COMPUTER1]. • The projector will determine if the input signal is RGB or component signal. COMPUTER (DIGITAL &...

  • Page 59: Menu Descriptions & Functions [Adjust]

    5. Using On-Screen Menu  Menu Descriptions & Functions [ADJUST] [PICTURE] [PRESET] This function allows you to select optimized settings for your projected image. You can adjust neutral tint for yellow, cyan or magenta. There are six factory presets optimized for various types of images. You can also use [DETAIL SETTINGS] to set user adjustable settings to customize each gamma or color.
  • Page 60 5. Using On-Screen Menu [GENERAL] Storng Your Customzed Settngs [REFERENCE] This function allows you to store your customized settings in [PRESET 1] to [PRESET 6]. First, select a base preset mode from [REFERENCE], then set [GAMMA CORRECTION] and [COLOR TEMPERA- TURE].

  • Page 61: Image Options

    5. Using On-Screen Menu [RESET] The settings and adjustments for [PICTURE] will be returned to the factory settings with the exception of the following; Preset numbers and [REFERENCE] within the [PRESET] screen. The settings and adjustments under [DETAIL SETTINGS] within the [PRESET] screen that are not currently selected will not be reset.
  • Page 62 5. Using On-Screen Menu Adjustng Horzontal/Vertcal Poston [HORIZONTAL/VERTICAL] Adjusts the image location horizontally and vertically. - An image can be distorted during the adjustment of [CLOCK] and [PHASE]. This is not malfunction. - The adjustments for [CLOCK], [PHASE], [HORIZONTAL], and [VERTICAL] will be stored in memory for the current signal.
  • Page 63 [Example ] When the incoming signal with the resolution of 800 x 600 is displayed on the NP600/ NP500/NP400: [Example ] When the incoming signal with the resolution of 800 x...
  • Page 64 5. Using On-Screen Menu Sample mage when the approprate aspect rato s automatcally determned NP600/NP500/NP400 [Computer signal] Aspect ratio of incoming signal 16:9 15:9 16:10 Sample image when the appro- priate aspect ratio is automati- cally determined [Video signal] Aspect ratio of incoming signal...
  • Page 65 5. Using On-Screen Menu Adjustng the Vertcal Poston of Image [POSITION] (not avalable on NP500W) (only when [16:9], [15:9], or [16:10] is selected for [ASPECT RATIO]) When [16:9], [15:9], or [16:10] is selected in [ASPECT RATIO], the image is displayed with black borders on the top and bottom.

  • Page 66: Menu Descriptions & Functions [Setup]

    5. Using On-Screen Menu  Menu Descriptions & Functions [SETUP] [GENERAL] Enablng Auto Keystone [AUTO KEYSTONE] This feature allows the projector to detect its tilt and correct vertical distortion automatically. To turn on the AUTO KEYSTONE feature, select [ON]. To adjust the KEYSTONE feature manually, select [OFF]. Correctng Vertcal Keystone Dstorton Manually [KEYSTONE] You can correct vertical distortion manually.
  • Page 67 This is the Default setting NORMAL (100% Brightness). Select this mode to increase the lamp life (NP600/NP500W: approx.70% Brightness/ Steady Green light NP500/NP400: approx.80% Brightness) NOTE: • The [LAMP LIFE REMAINING] and [LAMP HOURS USED] can be checked in [USAGE TIME]. Select [INFO.] → [USAGE TIME].
  • Page 68 5. Using On-Screen Menu Selectng Menu Language [LANGUAGE] You can choose one of 21 languages for on-screen instructions. NOTE: Your setting will not be affected even when [RESET] is done from the menu. [MENU] Selectng Menu Color [COLOR SELECT] You can choose between two options for menu color: COLOR and MONOCHROME. Selectng Menu Dsplay Tme [DISPLAY TIME] This option allows you to select how long the projector waits after the last touch of a button to turn off the menu.
  • Page 69 5. Using On-Screen Menu [INSTALLATION] Selectng Projector Orentaton [ORIENTATION] This reorients your image for your type of projection. The options are: desktop front projection, ceiling rear projection, desktop rear projection, and ceiling front projection. DESKTOP FRONT CEILING REAR DESKTOP REAR CEILING FRONT...
  • Page 70 5. Using On-Screen Menu Dsablng the Cabnet Buttons [CONTROL PANEL LOCK] This option turns on or off the CONTROL PANEL LOCK function. NOTE: • This CONTROL PANEL LOCK does not affect the remote control functions. • When the control panel is locked, pressing and holding the EXIT button on the projector cabinet for about 10 seconds will change the setting to [OFF].
  • Page 71 5. Using On-Screen Menu Settng ID to the Projector [CONTROL ID] (Avalable only when the optonal remote control NP0RC s used) You can operate multiple projectors separately and independently with the single remote control that has the CONTROL ID function. If you assign the same ID to all the projectors, you can conveniently operate all the projectors together using the single remote control.
  • Page 72 5. Using On-Screen Menu [OPTIONS()] Settng Auto Adjust [AUTO ADJUST] This feature sets the Auto Adjust mode so that the computer signal can be automatically or manually adjusted for noise and stability. You can automatically make adjustment in two ways: [NORMAL] and [FINE]. OFF ......
  • Page 73 Selecting [ON] will give priority to a WXGA (1280 x 768) signal in recognizing an input signal. When [WXGA MODE] is set to [ON], an XGA (1024 x 768) signal may not be recognized on NP600, NP500, or NP400. In this case, select [OFF].
  • Page 74 5. Using On-Screen Menu [OPTIONS()] Usng Off Tmer [OFF TIMER] 1. Select your desired time between 30 minutes and 16 hours: OFF, 0:30, 1:00, 2:00, 4:00, 8:00, 12:00, 16:00. 2. Press the ENTER button on the remote control. 3. The remaining time starts counting down. 4.
  • Page 75 5. Using On-Screen Menu Turning On the Projector By Applying Computer Signal [AUTO POWER ON(COMP1)] When the projector is in Standby mode, applying a computer signal from a computer connected to the COMPUTER1 IN input will power on the projector and simultaneously project the computer’s image. This functionality eliminates the need to always use the POWER button on the remote control or the projector cabinet to power on the projector.

  • Page 76: Menu Descriptions & Functions [Info.]

    5. Using On-Screen Menu 7 Menu Descriptions & Functions [INFO.] Displays the status of the current signal and lamp usage. This item has four pages. The information included is as follows: TIP: Pressing the HELP button on the remote control will show the [INFO.] menu items. [USAGE TIME] [LAMP LIFE REMAINING] (%)* [LAMP HOURS USED] (H)
  • Page 77 5. Using On-Screen Menu [SOURCE] [SOURCE INDEX] [HORIZONTAL FREQUENCY] [VERTICAL FREQUENCY] [SIGNAL TYPE] [VIDEO TYPE] [SYNC TYPE] [SYNC POLARITY] [SCAN TYPE] [WIRED LAN] [PROJECTOR NAME] [MAC ADDRESS] [VERSION] [PRODUCT] [SERIAL NUMBER] [FIRMWARE] Version [DATA] Version [CONTROL ID] (when [CONTROL ID] is set)

  • Page 78: Menu Descriptions & Functions [Reset]

    5. Using On-Screen Menu  Menu Descriptions & Functions [RESET] Returnng to Factory Default [RESET] The RESET feature allows you to change adjustments and settings to the factory preset for a (all) source (s) except the following: [CURRENT SIGNAL] Resets the adjustments for the current signal to the factory preset levels. The items that can be reset are: [PRESET], [CONTRAST], [BRIGHTNESS], [COLOR], [HUE], [SHARPNESS], [ASPECT RATIO], [HORIZONTAL], [VERTICAL], [CLOCK], [PHASE], and [OVERSCAN].

  • Page 79: Maintenance

    6. Maintenance This section describes the simple maintenance procedures you should follow to clean the filters and replace the lamp. 1 Cleaning or Replacing the Filters The air-filter sponge keeps dust and dirt from getting inside the projector and should be frequently cleaned. If the filter is dirty or clogged, your projector may overheat.

  • Page 80: Cleaning The Cabinet And The Lens

    6. Maintenance 3. Reinstall the new filter cover (2 locations). • Insert the filter cover until you feel click. 4. Clear the filter hours used. To reset the filter usage time, from the menu, select [RESET] → [CLEAR FILTER HOURS]. (→page for resetting the filter usage time.) NOTE: Do not wash the filter with soap and water.

  • Page 81: Replacing The Lamp

    Do not touch them as the pieces of glass may cause injury. If this happens, contact your NEC dealer for lamp replacement.
  • Page 82 6. Maintenance 1. Remove the lamp cover. (1) Loosen the lamp cover screw • The lamp cover screw is not removable. (2) Push and slide the lamp cover off. 2. Remove the lamp housing. (1) Loosen the two screws securing the lamp housing until the phillips screwdriver goes into a freewheeling condi- tion.
  • Page 83 (1) Insert a new lamp housing until the lamp housing is plugged into the socket. CAUTION Do not use a lamp other than the NEC replacement lamp NP07LP. Order this from your NEC dealer. (2) Push the top center of the lamp housing to secure it.

  • Page 84: Appendix

    7. Appendix 1 Troubleshooting This section helps you resolve problems you may encounter while setting up or using the projector. Indicator Messages Power Indicator Indcator Condton Projector Condton Note The main power is off – Blinking light Green 0.5 sec On, The projector is getting ready to turn on.
  • Page 85 7. Appendix Common Problems & Solutions (→ “Power/Status/Lamp Indicator” on page 75.) Problem Check These Items Does not turn on • Check that the power cable is plugged in and that the power button on the projector cabinet or the remote or shut down control is on.
  • Page 86 ‘Fn” key along with one of the 12 function keys gets the external display to come on or off. For example, NEC laptops use Fn + F3, while Dell laptops use Fn + F8 key combinations to toggle through external display selections.

  • Page 87: Specifications

    HDCP and might not be displayed due to the decision/intention of the HDCP community (Digital Content Protection, LLC). **** An image with higher or lower resolution than the projector’s native resolution (NP600/NP500/NP400: 1024  768 / NP500W: 1280  800) will be displayed with Advanced AccuBlend.
  • Page 88 NP500WG: 1.8A NP600G: 1.8A NP500G/NP400G: 1.6A Power Consumption NP600: 325W in Lamp NORMAL Mode 325W in Lamp NORMAL Mode/: 240W in Lamp NP500/NP400: 295W in Lamp NORMAL Mode ECO Mode/11W in STANDBY Mode/3W in POWER- NP600/NP500/NP400: 240W in Lamp ECO...

  • Page 89: Cabinet Dimensions

    7. Appendix  Cabinet Dimensions Lens center 308 (12.1") 76 (3.0") 78 (3.1") Lens center Unit: mm (inch)

  • Page 90: Pin Assignments Of D-Sub Computer Input Connector

    7. Appendix  Pin Assignments of D-Sub COMPUTER Input Connector Mini D-Sub 15 Pin Connector Pn No. RGB Sgnal (Analog) YCbCr Sgnal 11 12 13 14 15 Green or Sync on Green Blue Ground Signal Level Ground Video signal : 0.7Vp-p (Analog) Red Ground Cr Ground Sync signal : TTL level...

  • Page 91: Compatible Input Signal List

    • Images above flagged with “*” are not supported by digital signal. • An image with higher or lower resolution than the projector’s native resolution (NP600/NP500/NP400: 1024 x 768 / NP500W: 1280 x 800) will be displayed with Advanced AccuBlend.

  • Page 92: Pc Control Codes And Cable Connection

    7. Appendix  PC Control Codes and Cable Connection PC Control Codes Function Code Data POWER ON POWER OFF INPUT SELECT COMPUTER 1 INPUT SELECT COMPUTER 2 (Digital) 02H INPUT SELECT COMPUTER 2 (Analog) 02H INPUT SELECT VIDEO INPUT SELECT S-VIDEO PICTURE MUTE ON PICTURE MUTE OFF SOUND MUTE ON...

  • Page 93: Troubleshooting Check List

    7. Appendix 7 Troubleshooting Check List Before contacting your dealer or service personnel, check the following list to be sure repairs are needed also by referring to the “Troubleshooting” section in your user’s manual. This checklist below will help us solve your problem more efficiently.
  • Page 94 Native resolution: Refresh rate: Video adapter: Other: Projector DVD player Vdeo equpment Sgnal cable VCR, DVD player, Video camera, Video game or other NEC standard or other manufacturer’s cable? Model number: Length: inch/m Manufacturer: Distribution amplifier Model number: Model number: Switcher...

  • Page 95: Travelcare Guide

    7. Appendix  TravelCare Guide 6) Problems or damage caused by expendable supplies or devices connected to the product other than those designated by NEC. TravelCare - a service for international travelers 7) Problems caused by natural consumption, wear or deterioration of parts under normal usage conditions.
  • Page 96 +966 1 4657912 Email Address: bhimji@samir-photo.com (Regions Covered) Taiwan Alkhobar Address: P.O.Box 238, Alkhobar 31952, Saudi Arabia NEC Solutions Asia Pacific Pte. Ltd Telephone: +966 3 8942674 Address: 401 Commonwealth Drive, #07-02, Haw Par Fax Line: +966 3 8948162 Technocentre, Singapore 149598 Email Address: chamsedin@samir-photo.com...
  • Page 97 7. Appendix P-1/ Date: TO: NEC or NEC’s Authorzed Servce Staton: (Company & Name with signature) Dear Sir (s), I would like to apply your TravelCare Service Program based on attached registration and qualification sheet and agree with your following conditions, and also the Service fee will be charged to my credit card account, if I don’t return the Loan units within the specified period.
  • Page 98 3) Any fault in the attachments or associated products or components (whether or not supplied by NEC or its agents which do not form part of the Product covered by this warranty); 4) Any act of God, fire, flood, war, act of violence or any similar occur- rence;...
  • Page 99 © NEC Display Solutions, Ltd. 2008 7N951211...

This manual is also suitable for:

Np500wNp400Np500

Table of Contents