hit counter script
NEC GT6000 User Manual
  1. Manuals
  2. Brands
  3. NEC Manuals
  4. Projector
  5. GT6000 - SXGA+ LCD Projector
  6. User manual
NEC GT6000 User Manual

NEC GT6000 User Manual

Nec user's manual lcd projector gt6000/gt5000
Hide thumbs Also See for GT6000:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Installation Manual
GT6000/GT5000
LCD Projector
User's Manual

Advertisement

Table of Contents
loading

Related Manuals for NEC GT6000

Summary of Contents for NEC GT6000

  • Page 1 GT6000/GT5000 LCD Projector User’s Manual...

  • Page 2: Important Information

    Please read this manual carefully before using your NEC GT6000/ GT5000 Projector and keep the manual handy for future refer- ence. Your serial number is located on the bottom of your GT6000/ GT5000. Record it here: If you are a user of the GT6000R, read the supplied document which describes the differences from the GT6000.
  • Page 3 Do not touch them as the pieces of glass may cause injury. If this happens, contact your NEC dealer for lamp replacement.

  • Page 4: Table Of Contents

    Menu ... 8-13 Setup ... 8-15 Lamp Settings ... 8-18 Link Mode ... 8-18 LAN Mode ... 8-19 Seamless Switch (GT6000 only) ... 8-23 Setting a Password ... 8-24 Security ... 8-25 Tools ... 8-26 Timer ... 8-26 Using Capture (GT5000 only) ... 8-28 Using PC Card Files ...

  • Page 5: Introduction

    What's in the Box? ... 1-2 x Introduction to the Projector ... 1-3 c Getting to Know Your Projector ... 1-4 Attaching the lens hood cap to the lens hood with the supplied string and rivet . 1-6 Carrying the Projector ... 1-6 Top Features ...

  • Page 6: What's In The Box

    Make sure your box contains everything listed. If any pieces are missing, contact your dealer. Please save the original box and packing materials if you ever need to ship your Projector. NOTE: Lenses are optional. Order lenses from your NEC dealer.

  • Page 7: Introduction To The Projector

    The GT6000/GT5000 is our most sophisticated three panel, dual lamp XGA LCD projector. With the GT6000/GT5000 you will be able to project images up to 500" (measured diagonally) from your DVD player, VCR, satellite hookup, HDTV source, PC, Work- station or Macintosh computer (desktop or notebook) and im- ages from you digital camera PC Card or compact flash memory.

  • Page 8: Getting To Know Your Projector

    Getting to Know Your Projector Terminal panel (Left) D IO L/ M D IO L/ M D IO R /C G /Y V ID S -V ID E B /C L/ M L/ M Lens (optional) Lens hood cap...
  • Page 9 1. Introduction Depression for foot (4 locations) Speaker 5W (Stereo) Remote sensor Remote sensor Ventilation (outlet) Air filter (Left) Lamp cover 2 (Left) Ventilation (outlet) Remote sensor Air filter (Right) Ventilation (inlet) Remote sensor...

  • Page 10: Attaching The Lens Hood Cap To The Lens Hood With The Supplied String And Rivet

    Always carry your projector by the handle. Ensure that the power cable and any other cables connecting to video sources are disconnected before moving the projector. When moving the projector or when it is not in use, cover the lens with the lens hood cap.

  • Page 11: Top Features

    Use this button to turn the power on and off when the main power is supplied and the projector is in standby mode or idle mode. NOTE: To turn on or off the projector, press and hold this button for a minimum of two seconds. 2. POWER Indicator When this indicator is green, the projector is on;...

  • Page 12: Terminal Panel Features

    H/V terminal. When using luminance and color- difference signals of HDTV and DVD, connect Pr/Cr to the R, Y to the G and Pb/Cb to the B input of the projector. RGB 1 Audio Input Jacks (RCA) L/MONO: This is your left channel audio input for stereo sound coming from the RGB Input 1 source.
  • Page 13 OUT: for daisy-chaining multiple projectors and operating them with the same external equipment. To do so, connect to a sec- ond projector’ s IN terminal to relay the input at the IN terminal of the first projector until all the projectors are connected.

  • Page 14: Remote Control Features

    LENS 1. POWER ON Press and hold this button for a minimum of two seconds to turn on the projector when the main power is supplied and the projector is in standby mode or idle mode. 2. POWER OFF Press and hold this button for a minimum of two seconds to turn off the projector.
  • Page 15 CTL and then pressing MUTE OSD (Forced On-Screen Mute Mode) ; doing this again restores it. In this case any adjustment will still change the projector's memory settings. This mode is available even when input is switched to another or the power is turned off the main power.

  • Page 16: Remote Control Precautions

    NOTE: You cannot operate the projector using the remote control if: • The remote control ID is not set to [None]. • The remote ID is not the same as the projector ID. See page 7-2 for setting remote ID and projector ID.

  • Page 17: Using The Remote Control In Wired Operation

    Using the Remote Control in Wired Operation Connect one end of the supplied remote cable to the REMOTE 2 IN mini jack and the other end to the remote jack on the remote control. NOTE: Do not use this jack for anything other than intended use. Connecting the wired remote control to the SC.

  • Page 18: Installation

    Installation z Setting Up Your Projector ... 2-2 Screen Size and Projection Distance ... 2-2 x Lens Shift Adjustable Range ... 2-4 c Optional Lens Installation ... 2-6 v Making Connections ... 2-13 Connecting Your PC or Macintosh ... 2-13 To connect Scart Output ...

  • Page 19: Setting Up Your Projector

    This chapter describes how to set up your projector and how to connect video and audio sources. z Setting Up Your Projector Your Projector is simple to set up and use. But before you get started, you must first: 1. Determine the image size 2.
  • Page 20 After resetting, perform fine adjustment on the lens position by using the LENS SHIFT button NOTE: When using the projector with either the GT13ZLB or GT12ZLB lens, it is recommended to select "Dual" in the Lamp Settings menu. This will provide the best performance when operating the projector.

  • Page 21: Lens Shift Adjustable Range

    * Installing the projector on the ceiling must be done by a qualified tech- nician. • Tilting the front of the projector up or down by more than 45° from level could reduce lamp life by up to 20%. • Only use your projector on a solid, level surface. If the projector falls, you could be injured and the projector severely damaged.
  • Page 22 * Installing the projector on the ceiling must be done by a qualified tech- nician. • Tilting the front of the projector up or down by more than 45° from level could reduce lamp life by up to 20%. • Only use your projector on a solid, level surface. If the projector falls, you could be injured and the projector severely damaged.

  • Page 23: Optional Lens Installation

    GT06RLB and GT10RLB (Short throw fixed-focus lens) * Press the power button (ON/STAND BY) on the projector or POWER OFF button on the remote control for a minimum of two seconds to turn off the power, wait 90 seconds (2 minutes in the optional extended life lamp GT60LPS) for the cooling fan to stop, turn off the main power switch then disconnect the power cable.
  • Page 24 Secure the 4 screws using the hexagonal driver. r Insert the connector of the lens unit fully into the socket of the extension cable attached to the projector. NOTE: The GT13ZL, GT19ZL, GT24ZL and GT34ZL optional lenses have one connector. The B type lenses (GT13ZLB, GT24ZLB and GT34ZLB) and GT20ZL have two connectors.
  • Page 25 For installing the GT12ZLB Preparation: Tools needed for installation: A hexagonal driver is supplied with the optional lens. 1. Remove the lens hood cap and lens hood. q Remove the lens hood cap. w Loosen and remove the 2 screws on the lens hood using the hexagonal driver. e Remove the lens hood by pushing down and pulling the top toward you.
  • Page 26 CAUTION: There is a lens shift detection switch for the moving gears of the lens shift motors used to reduce the risk of pinching fingers. Do not defeat this feature. e Secure the 4 screws using the hexagonal driver. r Insert the connector of the lens unit fully into the socket of the extension cable attached to the projector. D IO L/ M...
  • Page 27 For installing the GT06RLB Preparation: Tools needed for installation: A hexagonal driver is supplied with the optional lens. 1. Remove the lens hood cap and lens hood. q Remove the lens hood cap. w Loosen and remove the 2 screws on the lens hood using the hexagonal driver. e Remove the lens hood by pushing down and pulling the top toward you.
  • Page 28 3. Mount the lens unit on the projector and connect the extension cable attached to the projector. q Remove the lens cap from the rear end of the lens unit. NOTE: Leave the front lens cap for protection while mounting the lens unit.
  • Page 29 NOTE: The buttons on the remote control or the projector cabinet do not work for the focus adjustment on the GT06RLB lens. See page 3-4. To adjust the focus for the GT06RLB lens, rotate the three knobs on the lens unit.

  • Page 30: Making Connections

    Making Connections NOTE: When using with a notebook PC, be sure to connect between the projector and the notebook PC before turning on the power to the notebook PC. In most cases signal cannot be output from the RGB output unless the notebook PC is turned on after connecting with the projector.

  • Page 31: To Connect Scart Output

    VCRs and DVD players. It is also referred to as Euro-connec- To RGB 2 IN tor. ADP-SC1 NOTE: The ADP-SC1 SCART adapter is obtainable from your NEC dealer in Europe. Contact your NEC dealer in Europe for more information. AUDIO AUDIO OUT...

  • Page 32: Connecting Your Dvd Player

    (female) 3 cable (ADP-CV1) Audio cable (not supplied) DVD player You can connect your projector to a DVD player with component output or Video output. To do so, simply: 1. Turn off the power to your projector and DVD player.

  • Page 33: Connecting Your Vcr Or Laser Disc Player

    To make these connections, simply: 1. Turn off the power to the projector and VCR, laser disc player or document camera. 2. Connect one end of an RCA cable (not supplied) to the video...

  • Page 34: Connecting To A Network

    Using an HTTP Browser” on page 10-11) NOTE: To control the projector from the PC connected to a network, from the Advanced menu select [Projector Options] → [Setup] → [Page 4] and then place a check mark on “Idle Mode”. See page 8-17.

  • Page 35: Connecting The Supplied Power Cable

    Connecting the Supplied Power Cable Connect the supplied power cable to the projector. First connect the supplied power cable's three-pin plug to the AC IN of the projector, and then connect the other plug of the supplied power cable in the wall outlet.
  • Page 36 Projecting an Image (Basic Operation) z Turning on the Projector... 3-2 x Selecting a Source ... 3-3 c Adjusting the Picture Size and Position ... 3-3 v Correcting the Horizontal and Vertical Keystone Distortion (3D Reform) ... 3-4 b Optimizing RGB Picture Automatically ... 3-6 n Turning Up or Down Volume ...

  • Page 37: Turning On The Projector

    If you want, you can select the menu language later. See "Language" on page 8-13. NOTE: To turn the projector on by plugging in the power cable, first turn the Main Power switch to ON and use the menu and enable the "Auto Start" feature. (See page 8-16.) Immediately after turning on the projector, screen flicker may occur.

  • Page 38: Selecting A Source

    KEYSTONE AMPLITUDE ENTRYLIST MAGNIFY FOCUS ZOOM LENS NOTE: If no input signal is available, the projector will display a blue background (factory preset). Using the menu You can also select the computer or video source using the menu. 3D REFORM...

  • Page 39: Reform)

    For the zoom and the lens shift adjustment, perform the normal procedures. NOTE: The buttons on the remote control or the projector cabinet do not work for the focus adjustment on the GT06RLB lens. To adjust the focus for the GT06RLB lens, rotate the three screws on the lens unit.
  • Page 40 You can save your Cornerstone changes. The changes are saved when you turn off the projector. To do so, select [Projector Options] → [Setup] → [Page 4]. Select the 3D Reform Save check box. This is not selected at the time of shipment.

  • Page 41: Optimizing Rgb Picture Automatically

    Selecting "Undo" will exit without saving changes. NOTE: To return the 3D Reform correction setting values to the factory default, press and hold the 3D REFORM button on the projector cabinet or the KEYSTONE button on the remote control for a minimum of 2 seconds.

  • Page 42: Turning Off The Projector

    Steady green Flashing orange light light NOTE: You cannot turn off the projector for 1 minute immediately after turning on the projector. CAUTION Do not unplug the power cable from the wall outlet or do not turn off the main power under any one of the following circumstances. Doing so can cause damage to the projector: •...

  • Page 43: Convenient Features

    Convenient Features z Turning Off the Image and Sound ... 4-2 x Enlarging and Moving a Picture ... 4-2 c Getting the On-line Help and Information ... 4-2 v Using a USB Mouse ... 4-3 b Using a USB HUB Function ... 4-3 n Changing Background Logo ...

  • Page 44: Turning Off The Image And Sound

    CTL and then pressing MUTE OSD (Forced On-Screen Mute Mode) ; doing this again restores it. In this case any adjustment will still change the projector's memory settings. This mode is available even when switching inputs or the main power is turned off.

  • Page 45: Using The Usb Mouse

    • The PCs using the USB Host Controller may not be available. • When connecting a USB hub to the USB port (type B) on the projector, be sure to use a USB hub capable of supplying 500mA per port of downstream current.

  • Page 46: Changing Background Logo

    * Once you have changed the background from the NEC logo to an- other, you cannot return the logo to background even by using Fac- tory Default. To do so, repeat the above steps. The NEC logo file is included on the supplied CD-ROM NEC Projector User Supportware (“/Logo/nec_bb_x.jpg”...

  • Page 47: Lens Memory

    , Lens Memory This function serves to store the adjusted value when using the Shift, Focus, and Zoom buttons of the projector or the remote control. Reference memory: Reference Point ... Adjusted settings are stored in memory as a reference com- mon to all the input sources.

  • Page 48: Using The Viewer

    Using the Viewer z Making the Most out of the Viewer Function ... 5-2 x Operating the Viewer Function from the Projector (playback) ... 5-3...

  • Page 49: Making The Most Out Of The Viewer Function

    NOTE: • To use the Viewer, first you need to create presentation materials on your PC using the Dynamic Image Utility 2.0 contained on the supplied NEC Projector User Supportware CD-ROM. For installation, see “6- b Software Installation”. For creating presentation materials, see the Slide show function on the on-line manual of the Dynamic Image Utility 2.0.

  • Page 50: Operating The Viewer Function From The Projector (Playback)

    Projector (playback) This section describes the operation for showing slides of pre- sentation documents created using the Viewer function with the projector. It is also possible to make slides directly from the im- ages projected with the projector. Projecting slides (Viewer) 1.
  • Page 51 NOTE: * Unless a PC card is inserted into the PC Card slot of the projector, the Capture feature is not available. * The "Card Error" display means that the free space of the PC card is insufficient for saving images.
  • Page 52 Deleting Captured Images Using the Delete button on the tool bar for Viewer can delete captured images. Prev Play Jump Drive Next Stop Select To delete captured images: 1. Select Viewer and display a folder list of captured images. 2. Use button to select the Capture folder “Cap”...

  • Page 53: Using The Projector In A Network

    Using the Projector in a Network z End User License Agreement ... 6-2 x Introduction ... 6-3 c Supported Projectors ... 6-4 v Equipment Connections and Settings ... 6-5 b Software Installation ... 6-6 n Starting/Exiting the Software ... 6-7...

  • Page 54: End User License Agreement

    AGREEMENT, CLICK THE "No" BUTTON. THE INSTALLATION PROCESS WILL NOT CONTINUE. NEC Viewtechnology,Ltd.("NECVT") grants you ("User") a license to use the NEC PROJECTOR USER SUPPORTWARE ("Soft- ware") provided with this End User License Agreement ("EULA"). User assumes responsibility for the selection, adoption use and the result of use of the Software to achieve its intended result.

  • Page 55: Introduction

    Introduction Thank you for your purchase of the NEC portable projector (here- after referred to as "unit" or "projector"). This projector is connected to a personal computer or other equip- ment and clearly projects text or graphics to a screen.

  • Page 56: Supported Projectors

    (when used) • For information on supported LAN cards, visit: • For wireless LAN connection, use NEC optional wireless LAN card (SWL-2100N-N*). * Last digit of the model code varies depending on which country you live in. For more information, visit the above Website.

  • Page 57: Equipment Connections And Settings

    See "Setting LAN Mode" on page 8-19 for information about the vari- ous items. NOTE: When switching the power of the projector on/off with the projector control function, please set [Projector Options] → [Setup] → [Page 4] → [Idle Mode] to "On". Settings at the Personal Computer Side Perform the regular LAN connections settings according to the instruction manual of the LAN card (adapter).

  • Page 58: Software Installation

    "Administrators" authority. When using Windows XP, perform with "Computer Administrator" authority. • If you have NEC Projector User Supportware (Dynamic Image Utility 2.0 and Image Express Utility 1.0) already installed on your computer, before installing the new NEC Projector User Supportware, first uninstall the current one.

  • Page 59: Starting/Exiting The Software

    (2) Install the software on the personal computer from the supplied CD- ROM. (Page 6-6) The software cannot be started from the supplied CD-ROM. 1. From the [Start] menu click [All Programs] → [NEC Projector User Supportware] → [Viewer PPT Converter 2.0]. Dynamic Image Utility 2.0 will start.

  • Page 60: Troubleshooting

    Check Points Has Microsoft PowerPoint been installed on the personal computer? <Problem> When using the projector control function, the projector power does not switch on. (DIU 2.0) Check Points Are the personal computer and the projector connected by a serial cable?
  • Page 61 On the LT260K and LT240K, images cannot be sent from the “Dynamic Image Utility 2.0” on a PC to the projector on the Continuous Transmit of the Image Express Utility 1.0. <Problem> Operation of this projector software becomes unstable. (DIU 2.0, IEU 1.0)
  • Page 62 Set only the network interface card (NIC) that is connected to the projector to "Valid". For a network card that is not connected to the projector, click the network card name under "Control Panel" "Device Manager" "Network Adapter" and then click [Properties (R)] and set the device usage to "Not used".
  • Page 63 <Problem> When used in the LAN environment, the projector cannot be detected. (DIU 2.0, IEU 1.0) Check Points If you have a personal firewall installed on your computer, the personal firewall may not allow for communication with the projector. 6. Using the Projector in a Network...

  • Page 64: Setting Up For Double Stacking In Link Mode

    Setting Up for Double Stacking in Link Mode z Stacking and Connecting the Projectors ... 7-2 x Adjusting and Registering Signals to Be Projected ... 7-5 c Adjusting the Lens Shift, Zoom and Focus to Clearly Display all projected patterns... 7-5 v Link Mode Setting ...

  • Page 65: Stacking And Connecting The Projectors

    NOTE: Up to two units can be gravity stacked without external support. In some cases, however, two images will not align on the screen correctly. This will become more apparent when displaying small text and detailed graphics. NOTE: Do not stack both the GT5000 and GT6000 projectors together. Master projector Slave projector z-1.
  • Page 66 – NOTE: • The optional lenses for GT6000/GT5000 have different geometrical distortions in wide zoom and tele. Select the best zoom position for stacking where the geometrical distortion is as small as possible. • The optional lens GT06RLB and GT10RLB do not support stacking.
  • Page 67 Hookup z-3-1. Use commercially available RGB signal cables to connect the RGB output of the master projector to the RGB input of the slave projector until all the projectors are connected. z-3-2. Next, using a commercially available, bi-directional RS-232C cable connect the PC CONTROL OUT terminal of the master projector to the PC CONTROL IN terminal of the slave projector until all the projectors are connected.

  • Page 68: Adjusting And Registering Signals To Be Projected

    NOTE: Be sure to set the Link Mode on the slave projector before the master pro- jector. If you do this first on the master projector, you will not be able to set the Link Mode on the slave projector.

  • Page 69: List Of Menu Items Available In Link Mode

    MUTE(OSD) Remote Control *1: Unregistered signal is displayed on the master projector only and the picture is muted on the slave projector. *2: Adjustment is possible on each projector independently. *3: You can also turn on the slave projector only.

  • Page 70: Using On-Screen Menu

    Projector Options ...8-13 Menu ...8-13 Setup ...8-15 Lamp Settings ...8-18 Link Mode ... 8-18 LAN Mode ... 8-19 Seamless Switch (GT6000 only) ... 8-23 Setting a Password ... 8-24 Security ... 8-25 Tools ... 8-26 Timer ...8-26 Using Capture ...8-28 Using PC Card Files ...

  • Page 71: Basic Menu Operation

    Using the Menus NOTE: The on-screen menu may not be displayed correctly while interlaced motion video image is projected. 1. Press the MENU button on the remote control or projector cabinet to display the Basic, Advanced or Custom Menu. MENU ADDRESS NOTE: When using a USB mouse, click the mouse button to display the menu.

  • Page 72: List Of Direct Button Combinations

    Sequentially selects the Projector Options sub menu. Displays the Lens Shift adjustment window. Turns on red. Available only when the projector is in the test pattern mode. Turns on green. Available only when the projector is in the test pattern mode.

  • Page 73: Menu Tree

    Adjust (Source) 4. Video 5. S-Video Sound 6. Viewer Ref. Adjust 7. LAN Factory Default 8. Slot 1 9. Slot 2 Projector Options 0. RGB1(Video) Tools Entry List Help Picture Test Pattern Video Adjust Picture Management Image Options Option Adjust...
  • Page 74 DD/MM/YYYY ddd, YYYY/MM/DD, YYYY/MM/DD ddd, Month DD, YYYY, Month DD, YYYY ddd Date, Time Preset Date Month/Day/Year (Day of the week), Time (H/M) Page 2 Display Select Date/Time/Input Terminal/Source Name/Projector ID/Message Page 3 Menu Color Color/Monochrome Mouse Pointer Pointer 1-9...
  • Page 75 Test Pattern * When selecting “PC Card”, the “Network Type” and the “WEP” setting screens appear. Seamless Switch (GT6000 only) Password Security Timer Capture (GT5000 only), PC Card Files, ChalkBoard Contents Source Information Projector Information Test Pattern Red (On/Off), Green (On/Off), Blue (On/Off)

  • Page 76: Menu Descriptions & Functions

    After finishing Displays the list of the entry signals. Use the SELECT tons on your remote control or the projector cabinet to select the signal and press the ENTER button on the remote control or the projector cabinet to display the Entry Edit Command screen.

  • Page 77: Adjust (Source)

    Edit ... Enables you to change source names or assign the direct key. Source Name Enter a signal name. Up to 18 alphanumeric char- acters can be used. Input Terminal Change the input terminal. RGB1 and RGB2 are available for RGB signal; Video and S-Video are available for composite signal.

  • Page 78: Picture Management

    Split Mode This feature turns on or off to show the effect of the Sweet Vision. NOTE: When the projector is turned off, the Split Mode will return to Off. Deinterlace Turns on or off the deinterlace function for a telecine signal.

  • Page 79: Image Options

    * When "Resolution" is set to "Native", "3D Reform", "Aspect Ratio", "Screen" and "Overscan" are not available. * While you are displaying an image with higher resolution than the projector's native resolution (GT6000: SXGA+ and GT5000: XGA), "Resolution" is not avail- able. Overscan Select overscan percentage (0%, 5%, 10% and 25%) for signal.

  • Page 80: Lens Memory

    Lens Memory This function serves to store or apply the adjusted value when using the Shift, Focus and Zoom buttons on the projector or the remote control. button to adjust Set Custom Point ... Store the current adjusted values in Use Custom Point ...

  • Page 81: Ref. Adjust

    Ref. Adjust Using 3D Reform This feature corrects trapezoidal distortion so that the projected image is rectangular. Two options are available for correcting procedures. You can save adjustment settings by using the 3D Reform Save option on Setup (See page 8-16). Cornerstone See page 3-4.

  • Page 82: Reference Lens Memory

    All Data ... Reset all the adjustments and settings for all the signals to the factory preset except Ref. Lens Memory, Language, Background Logo, Idle Mode, Communication Speed, Projector ID, Lamp Settings, LAN Mode, Password, Security, Remaining Lamp1/2 Time, Lamp 1/2 Hour Meter, Filter Usage and Projector Usage.
  • Page 83 The current year, month, date and time are displayed on the top of the screen. NOTE: The projector has a built-in clock. The clock will keep working for about 3 days after the main power is turned off. If the main power is off for 3 days or more, the built-in clock will cease.

  • Page 84: Setup

    Setting Viewer Options [Viewer Options] Show Folder List: If this option is checked, when the Viewer source is selected on the projector, the folder lists will be displayed and allows you to select the presentation from a PC card. Auto Play: If this option is checked, when the Viewer source is selected on the projector any given slide will start to play automatically.
  • Page 85 When "Auto Adjust" is set to "On", the projector automatically determines the best resolution for the current RGB input sig- nal to project an image using NEC's Advanced AccuBlend In- telligent Pixel Blending Technology. The image can be automatically adjusted for position and sta- bility;...
  • Page 86 * The RGB OUT connector will not output signal during the Standby mode. * Via the USB interface the projector can be turned on from your PC using Dy- namic Image Utility 2.0 during the Standby or Idle mode. On the LAN connection the projector can be controlled or monitored from your PC using Dynamic Image Utility 2.0 only in the Idle mode.

  • Page 87: Lamp Settings

    10 seconds will change the setting to enable. Lamp Settings The projector is designed to accept two lamps (dual lamp sys- tem). This dual lamp system provides prolonged lamp life or high brightness or extra lamp (Extended life lamp).

  • Page 88: Lan Mode

    • Connect an Ethernet LAN cable to the LAN port (RJ-45) of the projector for net- work connection. • NEC's optional wireless LAN card is available. For more information on inserting or ejecting a LAN card, see page 5-2. • Either PC Card Slots 1 or 2 can accept LAN card. If two LAN cards are inserted into both PC card slots, the first inserted one is effective.
  • Page 89 Advanced IP Address An IP address can be automatically assigned to this projector by your DHCP server. If your network does not automatically assign IP address, ask your network administrator for an ad- dress, and then register it manually. Automatic ... Automatically assigns an IP address to the pro- jector from a DHCP server.
  • Page 90 WEP (for Wireless only) Select this option whether using the WEP (Wired Equivalent Pri- vacy) key for encryption or not. To use encryption, specify WEP key. Disable ... Will not turn on the encryption feature. Your com- munications may be monitored by someone. 64bit ...
  • Page 91 This option notifies your computer of an error message via e- mail when using wireless or wired LAN. The error message will be noticed when the projector lamp has reached the end of its usable life or an error occurs in the projector.

  • Page 92: Seamless Switch (Gt6000 Only)

    NOTE: • With the Seamless Switch turned on, a signal with a higher resolution than 1024 768 (XGA) will be displayed using NEC’s Advanced AccuBlend technol- ogy. • When switching is performed using the Seamless Switch function between two signals with different “Picture Management" settings, the hue of the image may be changed immediately before source switching.

  • Page 93: Setting A Password

    Setting a Password A password can be set for your projector to avoid operation by an unauthorized person. There are two password options: one for menu and the other for logo. When a password is set, doing any one of the following four op- erations will display the Password input screen.

  • Page 94: Security

    3. Enter your keyword in the Release Code input screen. You can view the projected image. NOTE: Do not forget your keyword. However, if you forget your keyword, NEC or your dealer will provide you with your Release Code. See more information at the end of this section.

  • Page 95: Tools

    The PC card data will be deleted. If you've lost your registered PC card, proceed as follows: NOTE: NEC or your dealer will provide you with your Release Code in exchange for your registered keyword and Request Code. See URLs at the end of this section.
  • Page 96 To cancel this and return to its previous screen, select “Cancel”. NOTE: If there is no operation for 4 hours or more after the projector is turned on with On-Timer function, the projector will enter the standby or idle mode.

  • Page 97: Using Capture (Gt5000 Only)

    • To cancel the preset time, set "Off" for the preset time or turn off the power. • When the remaining time reaches 3 minutes before the projector is turned off, the "Projector will turn off in 3 minutes" message will be displayed on the bottom of the screen.

  • Page 98: Projector Information

    • When the remaining lamp time reaches 0, the Remaining Lamp Time bar indica- tor changes from 0% to 100 hours and starts counting down. If the remaining lamp time reaches 0 hour, the projector will not turn on. Lamp life (H)
  • Page 99 Maintenance z Replacing the Lamp ... 9-2 x Replacing or Cleaning the Filter ... 9-3 c Cleaning the Cabinet and the Lens ... 9-4...

  • Page 100: Replacing The Lamp

    3. Insert a new lamp housing until the lamp housing is plugged into the socket. CAUTION: Do not use a lamp other than the NEC replacement lamp (Standard life lamp: GT60LP or Extended life lamp: GT60LPS). 4. Secure it in place with the two screws.

  • Page 101: Replacing Or Cleaning The Filter

    2. Place the new filter on the filter cover in the correct direction. 3. Reinstall the filter cover. (This must be done to both left and right) 4. Plug the power cable into a wall outlet and turn on the projector. 5. Reset the filter usage hours to zero.

  • Page 102: Cleaning The Cabinet And The Lens

    9. Maintenance c Cleaning the Cabinet and the Lens 1. Turn off the projector before cleaning. 2. Clean the cabinet periodically with a damp cloth. If heavily soiled, use a mild detergent. Never use strong detergents or solvents such as alcohol or thinner.

  • Page 103: Appendix

    Appendix z USB Memory Device or USB Memory Card Reader Support ... 10-2 x Troubleshooting ... 10-3 c Specifications ... 10-5 v Cabinet Dimensions ... 10-7 b Pin Assignments of D-Sub RGB Input Connector .. 10-7 n Compatible Input Signal List ... 10-8 m REMOTE 1 Connector ...

  • Page 104: Usb Memory Device Or Usb Memory Card Reader Support

    * Turning off the main power switch or unplugging the power cable. • The drive for ”USB 1-4” is displayed only when the USB memory de- vice or USB memory card reader is connected to the projector. The drive for “USB 1-4” may be displayed differently from the one in the USB memory card reader.

  • Page 105: Troubleshooting

    Troubleshooting This section helps you resolve problems you may encounter while setting up or using the projector. Power Indicator Indicator Condition Blinking light Green blinking Orange blinking Green Steady light Orange Status Indicator Indicator Condition Blinking light Red blinking...
  • Page 106 Check These Items Does not turn on • Check that the power cable is plugged in and that the main power switch on the projector is on. See pages 1- 9 and 2-11. • Ensure that the lens hood or the lamp cover is installed correctly. See pages 1-4 and 9-2.
  • Page 107 PC compatible laptop, a combination of function keys will enable/disable the external display. Usually, the combination of the ‘Fn” key along with one of the 12 function keys gets the external display to come on or off. For example, NEC laptops use Fn + F3, while Dell laptops use Fn + F8 key combinations to toggle through external display selections.

  • Page 108: Specifications

    This section provides technical information about the GT6000/GT5000 Projector’s performance. Model Number GT6000/GT5000 Optical LCD Panel 1.4" p-Si TFT active-matrix with Micro Lens Array, 1024 768 (GT5000)/1400 1050(GT6000) native resolution* up to 1600 1200 with Advanced AccuBlend Technology Lamp 275 W DC lamp 2 Lamp Life...
  • Page 109 Meets AS/NZS3548 Class B Meets EMC Directive (EN55022, EN55024, EN61000-3-2, EN61000-3-3) Meets Low Voltage Directive (EN60950, TUV GS Approved) For additional information visit: US: http://www.necvisualsystems.com Europe: http://www.neceurope.com/ Global: http://www.nec-pj.com/ The specifications are subject to change without notice. 10-7 10. Appendix...

  • Page 110: Cabinet Dimensions

    v Cabinet Dimensions 2 (0.08) AUDIO OUT L/MONO AUDIO RGB 2 R/Cr RGB OUT B/Cb VIDEO S-VIDEO H/HV L/MONO L/MONO 17 (0.7) b Pin Assignments of D-Sub RGB Input Connector Mini D-Sub 15 Pin Connector Signal Level Video signal : 0.7Vp-p (Analog) Sync signal : TTL level * RGB 2 Input only POWER...

  • Page 111: Compatible Input Signal List

    DVD YCbCr #: Images in above flagged with # are compressed with Advanced AccuBlend on GT5000. @: Images in above flagged with # are compressed with Advanced AccuBlend on GT6000. NOTE: Some composite sync signals may not be displayed correctly.

  • Page 112: Remote 1 Connector

    Management, Power off Confirmation, Idle mode, Default Source Select, Timer and Test Pattern. NOTE: When turning off the power to the projector using the external control, do not disconnect the plug from the power outlet. These procedures are to protect your projector and the connected equipment.

  • Page 113: Pc Control Codes And Cable Connection

    . Using Software Keyboard 1 to 0 and Characters ... Use to type in IP address or projector name MODE ... Selects one of three modes for alphabet and spe- SP ... Inserts a space BS ...

  • Page 114: Operation Using An Http Browser

    Should this happen, consult your network administrator. * The projector may not respond if its buttons are repeatedly pressed in rapid intervals. Should this happen, wait a moment and repeat. If you still can’t get any response, pull out and then re-insert the LAN card.
  • Page 115 RGB1 (VIDEO) ... Switches to Video of the RGB1 connec- tor. RGB1 (S-VIDEO) ... Switches to S-Video of the RGB1 con- nector. Projector Status: This displays the condition of the projector. Remaining Lamp 1/2 Time ... Displays the remaining life of lamps 1/2 as a percentage.

  • Page 116: Limited Warranty

    5. In the event a product is returned to NEC Solutions for warranty service, and it is determined that there is no product defect or that the product condition is not covered by this limited warranty, a diagnostic service fee may be charged to the customer.

  • Page 117: Declaration Of Conformity

    Type of Product: Equipment Classification: Model: We hereby declare that the equipment specified above conforms to the technical standards as specified in the FCC Rules. NEC Solutions (America), Inc. 1250 N. Arlington Heights Road Itasca, Illinois 60143 (630) 467-5000 LCD Projector...

This manual is also suitable for:

Gt5000

Table of Contents