hit counter script
Sony MB-X6 Operating Instructions Manual
Sony MB-X6 Operating Instructions Manual

Sony MB-X6 Operating Instructions Manual

Tuner base unit
Hide thumbs Also See for MB-X6:

Advertisement

Quick Links

Tuner Base Unit
Operating Instructions
Before operating the unit, please read this manual
thoroughly and retain it for future reference.
The CD-ROM (supplied with European model only) includes operating
instructions for the MB-X6 Tuner Base Unit (English, French, German,
Italian, and Spanish versions). For details, see
"
Manual
on page 8.
MB-X6
© 2005 Sony Corporation
"
Using the CD-ROM
2-671-937-14 (1)
2671937140

Advertisement

Table of Contents
loading

Summary of Contents for Sony MB-X6

  • Page 1 Before operating the unit, please read this manual thoroughly and retain it for future reference. The CD-ROM (supplied with European model only) includes operating instructions for the MB-X6 Tuner Base Unit (English, French, German, “ Italian, and Spanish versions). For details, see Using the CD-ROM ”...
  • Page 2: Important Safety Instructions

    The model and serial numbers are located at the left side. Record the serial number in the spaces provided below. To reduce the risk of fire or electric shock, Refer to them whenever you call upon your Sony dealer do not expose this apparatus to rain or regarding this product.
  • Page 3 CAUTION AVERTISSEMENT The apparatus shall not be exposed to dripping or splashing. No objects filled with liquids, such as vases, Afin de réduire les risques d’incendie ou shall be placed on the apparatus. d’électrocution, ne pas exposer cet CAUTION appareil à la pluie ou à l’humidité. The unit is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if Afin d’écarter tout risque d’électrocution,...
  • Page 4 For the customers in Europe ATTENZIONE Hereby, Sony Corporation, declares that this MB-X6 is in L’apparecchio non deve essere esposto a gocciolamenti o compliance with the essential requirements and other spruzzi. Non collocare sull’apparecchio oggetti contenenti relevant provisions of the Directive 1999/5/EC.
  • Page 5 Für Kunden in Europa For kunder i Europa Hiermit erklärt Sony Corporation, dass sich das Gerät Sony Corporation erklærer herved at utstyret MB-X6 er i MB-X6 in Übereinstimmung mit den grundlegenden samsvar med de grunnleggende krav og øvrige relevante Anforderungen und den übrigen einschlägigen krav i direktiv 1999/5/EF.
  • Page 6 Smernice 1999/5/ES. Podrobnosti získate na nasledovnej webovej adrese: http://www.compliance.sony.de/ Za stranke v Evropi Sony Corporation izjavlja, da je ta MB-X6 v skladu z bistvenimi zahtevami in ostalimi relevantnimi določili direktive 1999/5/ES. Za podrobnosti vas naprošamo, če pogledate na URL: http://www.compliance.sony.de/...
  • Page 7: Table Of Contents

    Table of Contents Precautions ..................8 On operation ..................8 On cleaning.................... 8 Overview...................8 Features ....................8 Using the CD-ROM manual (for European model only) ...... 8 Location of Parts and Controls ............9 Front panel..................... 9 Rear panel.................... 10 Connections ................... 11 Antenna connections ................
  • Page 8: Precautions

    Overview On operation Features • The MB-X6 must be used within a temperature range of The MB-X6 is a tuner base unit and is capable of 0ºC to 40ºC (32ºF to 104ºF). Avoid using the unit for accomodating up to six URX-M1 Diversity Tuner...
  • Page 9: Location Of Parts And Controls

    Note For details, see “Installing the tuner units” on page 11. Before turning on the MB-X6, be sure to turn down the volume on the equipment connected to the MIX OUTPUT connector and the TUNER OUTPUT connectors of the MB-X6.
  • Page 10: Rear Panel

    10 dB when the length of the coaxial cables (5D-2V, RG-212/U or equivalent) connecting the antennas and the MB-X6 are 30 m (100 feet) or less, or 0 dB when the cables are over 30 m (100 feet) Note If noise or sound dropouts occur due to interferences or intermodulation, set these switches to 10 dB.
  • Page 11: Connections

    Match the six latches with the six holes on the front installed into the MB-X6. panel, then replace the front cover. Notes • Be sure to turn off the MB-X6 before installing the tuner units. • Do not touch the connector on the rear panel of the tuner units.
  • Page 12: About The Wru-806A/Wru-806B Uhf Synthesized Tuner Unit

    Removing the tuner units About the WRU-806A/ After removing the front cover, hold the tuner unit by the top and bottom, then pull it out of the slot. WRU-806B UHF Synthesized Tuner Unit This section describes parts and controls and the channel setting procedure of the optional WRU-806A/WRU-806B UHF Synthesized Tuner Unit.
  • Page 13: Display

    – button while holding down this button. Display BATT Press the POWER switch on the MB-X6 to turn it on. The model version number such as “U66” appears in the display of the tuner unit, and then the setting which has been made right before the MB-X6 was turned off is displayed.
  • Page 14: Operation

    Press the + button again to return to the GP/CH indication. Press the POWER switch on the MB-X6 to turn it on. The model version number such as “U66” appears in the display of the tuner unit, and then the setting which...
  • Page 15: Reception Channel Selection

    Automatic search and setting of available channels When you use the MB-X6 Tuner Base Unit in a multichannel operation system, you can assign available channels to all tuner units by operating the tuner unit which is installed into the tuner slot A.
  • Page 16: Rack Mounting

    Mount the MB-X6 on the rack using screws that are at least 12 mm (1/2 inches) long and that match the diameter of the screw holes on the rack.
  • Page 17: Specifications

    Supplied accessories Specifications AC power cord (1) Antennas (2) Operating Instructions (1) Audio outputs (TUNER OUTPUT 1 to 6/MIX CD-ROM (1) (European model only) OUTPUT) Design and specifications are subject to change without Connector type XLR-3-32 type (male) notice. Output impedance 47 ohms or less Load impedance 600 ohms or more...
  • Page 18: Wireless Microphone System Frequency List (For Wru-806A Au66 Model Only)

    66-50 798.375 66-25 795.250 66-51 798.500 When building up a multi-channel system, Sony recommends that one of the groups listed under “Groups 66-26 795.375 for the tuner” is selected to avoid mutual interference from other Sony wireless microphones/transmitters. Wireless Microphone System Frequency List (for WRU-806A AU66 Model only)
  • Page 19: Group For Tuner

    TV-67 Group 13 Group A1 Grouping 9 channels. Grouping 8 channels. 67-01 799.250 67-27 802.500 66-01 792.250 66-02 792.375 67-02 799.375 67-28 802.625 66-03 792.500 66-04 792.625 67-03 799.500 67-29 802.750 66-11 793.500 66-12 793.625 67-04 799.625 67-30 802.875 66-16 794.125 66-24 795.125...
  • Page 20 Grouping 8 channels. 67-03 799.500 67-06 799.875 67-05 799.750 67-08 800.125 67-11 800.500 67-12 800.625 67-16 801.125 67-22 801.875 67-26 802.375 67-25 802.250 67-35 803.500 67-33 803.250 67-38 803.875 67-40 804.125 67-42 804.375 67-45 804.750 Sony Corporation Printed in Korea...

Table of Contents