Page 1
NEC Express5800/T110j-S System Configuration Guide Introduction This document contains product and configuration information that will enable you to configure your system. The guide will ensure fast and proper configuration of your NEC Express5800 server. December 28, 2018 Revision 1.0 NEC Corporation...
SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110j-S Technical Specification Specification (1 / 2) Model T110j-S Part Number N8100-2681F, N8100-2682F Processor Type Intel® Intel® Xeon® Intel® Xeon® Pentium® processor E- processor E- processor 2124 2124G G5400 Clock speed 3.7 GHz 3.3 GHz 3.4 GHz...
Page 4
SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110j-S Embedded SATA RAID controller is supported only on limited operating systems. Maximum resolution available via Aspeed AST2500 remote console is 1280 x 1024 / 65K colors. Noise emission was measured in accordance with ISO 7779, at 25°C. The actual value may vary by the operating environment.
Page 5
SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110j-S Maximum resolution available via Aspeed AST2500 remote console is 1280 x 1024 / 65K colors. Noise emission was measured in accordance with ISO 7779, at 25°C. The actual value may vary by the operating environment.
SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110j-S External Views Front View Legend Power Button Global LED 1 Dump (NMI) Button Global LED 2 BMC Reset Button USB 3.0 Connectors Power LED Optical Disk Drive Power Capping LED Cover Key (2.5 inch Drive Configuration)
SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110j-S Rear Views Fixed power supply model Redundant power supply model Legend Serial Port Connector Data LAN Connectors VGA Connector PCI Slots USB Connectors AC Inlet Management LAN Connector Power Supply Unit Revision 1.0 – December 2018...
SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110j-S Configuration Diagram Fixed Power Supply Model Legend: Standard Components Mandatory Components Redundant Power Supply Model Legend: Standard Components Mandatory Components Revision 1.0 – December 2018 NEC Corporation...
SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110j-S Server Configuration 1 Base Models Product Name / Description Part Number Express5800/T110j-S N8100-2681F no Processor, no RAM, no Drive Cage, no HDD, no Optical Drive Including: 250 Watt non-hot plug power supply Express5800/T110j-S N8100-2682F...
SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110j-S Maximum Available Memory See the table below for the maximum memory size that you can actually use on your system. Maximum Memory Size Operating Systems Supported by Operating Maximum Available Memory Systems Microsoft Windows Server 2016 Standard...
SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110j-S 4 Internal Hard Disk Drives Front Cage (Required to select) Front Cage (Additional) Chassis Internal (Optional Installation Kit) 4x 2.5-inch SAS/SATA drive 2x 2.5-inch SAS/SATA drive 2x M.2 SATA SSD 2x 3.5-inch SATA HDD 2x 2.5-inch SAS/SATA drive...
SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110j-S RAID Configuration Embedded SATA non-RAID Controller 4.3.1 Category Product Name / Description Part Number Storage Controller Embedded SATA Controller (Standard) 4x 6Gb/s SATA NOTE: Embedded SATA RAID controller is supported only on limited OS. For more details, please see...
SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110j-S RAID Controller (2GB, RAID 0/1/5/6, WT) N8103-211 Avago(LSI) MegaRAID SAS 945N-8i RAID0/1/5/6/10/50/60, 2GB, Int. 8, PCIe 3.0 x8, SAS 12Gb/s, SATA 6Gb/s NOTE: It can not be supported with N8118-307 Dual M.2 SATA Drive...
Page 20
SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110j-S The warranty period of the SSD is the stated period of warranty or until the total bytes of written amount (PBW) exceeds the limit value. Please regularly check with the Universal RAID Utility.
SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110j-S 12TB 7.2K non-Hot Plug 3.5-inch SATA HDD N8150-601 1 x12 TB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm, 512e Sector NOTE: All drives within a RAID array should be of the same type, capacity and rotation speed.
SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110j-S 7 Internal RDX Drives RDX Drive Category Product Name / Description Part Number (Standard) Controller Internal USB Controller 1 x USB port Cable Internal USB cable K410-352(00) Required 1x Internal USB3.0 to 1x USB 3.0 device...
SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110j-S 8 PCI Card Network Interface Controller Category Product Name / Description Part Number Adapter 1000BASE-T Adapter N8104-150 Broadcom ® BCM5718 Gigabit Ethernet Controller PCIe 2.0 x1 NOTE: It can be installed up to four.
SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110j-S Using iSCSI See the table below for supported network interfaces and OS combinations. Category Network Interface Operating Systems 1GbE Embedded 1GbE NIC/ Windows Server 2016 N8104-150/-151 10GbE N8104-149 Windows Server 2016 (10GBASE-SR) 10GbE N8104-157...
SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110j-S 9 Other Add-in Components Internal Battery Kit Product Name / Description Part Number Internal simple UPS Control Kit N8181-153 Internal simple UPS controller 3.5-inch expansion bay(2) support Internal simple uninterrupted power supply N8181-152 Internal simple UPS unit 3.5-inch expansion bay(2) support...
SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110j-S High Temperature Support Option Product Name / Description Part Number High temperature resistant Kit N8181-140F Required for high temperature operation over 40°C (up to 48°C) System Configuration Condition for High Temperature Environment When using this system in a high temperature environment, there are the following conditions in the system configuration.
SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110j-S Enables the user to use the CD / DVD / FD / Flash memory of the remote terminals (PC/server) as if accessing the local drives. NOTE: Remote KVM and remote media features are not available for virtual machines.
SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110j-S References Server Management Standard With Remote KVM and Media License kit Hardware Temperature/hard monitoring drive /fan/voltage/power consumption/ System LAN/degeneration/ (memory/hard drive Hardware configuration information collection Hardware event log collection ...
SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110j-S OS Support Matrix for PCI Cards and Embedded Controllers Part Number Product Name Embedded SATA non-RAID Controller - Embedded SATA RAID Controller Embedded 1GbE NIC RAID Controller (2GB, RAID 0/1/5/6) N8103-205 ...
SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110j-S Secure Boot Mode This server supports Secure Boot. It is supported with UEFI Boot mode and protects the security by only allowing software programs with digitaBroadcomgnature to run. The supported operating systems, software, and boot devices are below. The default setting of Secure Boot is disabled.
All other products, brands, or trade names used in this document are trademarks or registered trademarks of their respective holders. NEC shall not be liable for technical or editorial errors or omissions contained herein. For hard drive capacity measurements, 1 GB = 1 billion bytes. Actual formatted capacity is less.
SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110j-S Revision History Revision Date Description December 28, 2017 Initial release Revision 1.0 – December 2018 NEC Corporation...