Table of Contents
Advertisement
❼ Menu Descriptions & Functions [INFO.]
Displays the status of the current signal and lamp usage. This item has seven pages. The information included is
as follows:
TIP: Pressing the HELP button on the remote control will show the [INFO.] menu items.
[USAGE TIME]
[LAMP LIFE REMAINING] (%)*
[LAMP HOURS USED] (H)
[FILTER HOURS USED] (H)
[TOTAL CARBON SAVINGS] (kg-CO2)
[TOTAL COST SAVINGS]
*
The progress indicator shows the percentage of remaining bulb life.
The value informs you of the amount of lamp usage. When the remaining lamp time reaches 0, the LAMP LIFE
REMAINING bar indicator changes from 0% to 100 Hours and starts counting down.
If the remaining lamp time reaches 0 hours, the projector will not turn on.
• The message to the effect that the lamp or the filter should be replaced will be displayed for one minute when
the projector is turned on and when the POWER button on the projector or the remote control is pressed.
To dismiss this message, press any button on the projector or the remote control.
OFF/AUTO ECO
10000
*1 This is not a warranty time. Repair or replacement parts may be required before the lamp is replaced.
• [TOTAL CARBON SAVINGS]
This displays the estimated carbon saving information in kg. The carbon footprint factor in the carbon saving
calculation is based on the OECD (2008 Edition). (→ page 25)
Lamp life (H)
ECO MODE
NORMAL
12000
Replacement lamp
ECO
15000
NP47LP
74
5. Using On-Screen Menu
Advertisement
Table of Contents
Troubleshooting
