Making A Connection To A Wap Service - Nokia 5100 User Manual
Egsm 900, gsm 1800 and gsm 1900 networks
Hide thumbs
Also See for 5100:
- User manual (193 pages) ,
- User manual (84 pages) ,
- User manual (126 pages)
Table of Contents
Advertisement
M e n u f u n c t i o n s
An access point name is needed to establish a connection to a
GPRS network. You obtain the access point name from your
network operator or service provider.
•
- Key in the address, press
IP address
You obtain the IP address from your network operator or service
provider.
•
Authentication type
- Select
Automatic
, the login type uses the user name and password keyed
in the following settings. If you select Manual, the login
information is required when establishing a connection.
•
- Select
Login type
Manual
•
- Key in the user name and press OK.
User name
•
- Key in the password and press OK.
Password
Making a connection to a WAP service
Firstly, make sure that the service settings of the WAP service you
want to use are activated. To activate the settings:
• Press Menu, and select
Services
settings
and scroll to the set you want to activate and press
Activate.
Secondly, make a connection to the WAP service. There are three
ways to connect:
1. Open the homepage of the WAP service:
Press Menu, and select
Services
Tip: To quickly open the homepage of a WAP service,
press and hold
2. Select a bookmark of the WAP service:
Press Menu, and select Services, Bookmarks, and select a
bookmark.
If the bookmark does not work with the current active service
settings, activate another set of service settings and try again.
3. Key in the address of the WAP service:
73
for a dot , and press OK.
Secure
or Normal. If you select
or Automatic.
and Settings. Select
Active service
and Home.
in standby mode.
Advertisement
Table of Contents
