D-Link DAP-1365 Setup Procedure

Hide thumbs Also See for DAP-1365:

Technical Support Setup Procedure

How to configure DAP-1365 as Access Point with default

wireless SSID?

(Note: Please ensure the device LED is blinking orange colour before you do setup.

If it is not blinking in orange colour, follow the guide on page 3 on how to reset the device

before follow the guide to setup.)

Step 1: Copy down the wireless name and password that was on the sticker of the device.

Step 2: a) Plug DAP-1365 direct to power outlet.

b) Connect LAN Cable from DAP-1365 to LAN port of the Router.

Step 3: Click on the Computer Icon on the right bottom side of the Windows.

Step 4: Select the Wireless network name that was copy down.

Page | 1

Table of Contents

Page 1 Step 1: Copy down the wireless name and password that was on the sticker of the device. Step 2: a) Plug DAP-1365 direct to power outlet. b) Connect LAN Cable from DAP-1365 to LAN port of the Router. Step 3: Click on the Computer Icon on the right bottom side of the Windows.
Page 2 Technical Support Setup Procedure Step 5: Enter the Wifi Password which had copy down earlier on. Click on OK. Step 6: You are now connected to the DAP-1365 and use the internet. --- END --- Page | 2...
Page 3 How to reset DAP-1365. Step 1: Plug DAP-1365 direct to power outlet. Step 2: Power on DAP-1365 and wait for 1 min. Step 3: Use a paper clip to press and hold the Reset Button for 30 second. Step 4: Wait for 2 min for the device to fully power on after reset.