About this task
The following image indicates the location of the camera and provides a visual representation of the installation procedure.
Steps
1. Align and place the camera module into the slot on the display back-cover.
2. Connect the camera cable to the connector on the camera module.
3. Affix the adhesive tape to secure the camera cable to the connector on the camera module.
4. Align and affix the camera cable on the display back-cover.
Next steps
1. Install the
display
panel.
2. Install the
display
bezel.
3. Install the
display
assembly.
4. Install the
I/O board
cable.
5. Install the
WWAN card
6. Install the
WLAN
card.
7. Install the
base
cover.
8. Exit the
service mode
9. Install the
SIM card tray
10. Install the microSD-card.
11. Follow the procedure in
Display cable
Removing the display cable
Prerequisites
1. Follow the procedure in
2. Remove the microSD-card.
3. Remove the
SIM card tray
4. Enter the
service
mode.
5. Remove the
base
cover.
6. Remove the
WLAN
card.
7. Remove the
WWAN card
for 4G LTE enabled systems.
for 4G LTE enabled systems.
after working inside your
before working inside your
for 4G LTE enabled systems.
for 4G LTE enabled systems.
computer.
computer.
Removing and installing components
97