Next steps
1. Connect the battery cable to the connector on the system board.
2. Replace the
base
cover.
3. Replace the
microSD
4. Follow the procedure in
Memory modules
Removing the memory module
Prerequisites
1. Follow the procedure in
2. Remove the
microSD
3. Remove the
base
cover.
4. Disconnect the battery cable from the connector on the system board.
Steps
1. Pry the retention clips securing the memory module until the memory module pops-up [1].
2. Remove the memory module from the memory module slot [2].
card.
after working inside your
before working inside your
card.
computer.
computer.
Disassembly and reassembly
37