Get Started
Nokia X
TA-1082/TA-1087
1. Insert the SIM card
1. Open the SIM card tray: push the tray opener pin
in the tray hole and slide the tray out.
2. Put a nano-SIM card on the tray with the contact
area face down. If you have a dual-SIM phone, put
the second SIM card in slot 2 with the contact area
face down.
3. Slide the tray back in the slot.
Use only original nano-SIM cards. Use of incompati-
ble SIM cards may damage the card or the device,
and may corrupt data stored on the card.
Both SIM cards are available at the same time when
the device is not being used, but while one SIM card
is active, for example, making a call, the other may
be unavailable.
Note: On dual SIM capable devices, both SIM1
and SIM2 slots support 4G networks. However, if
your SIM1 and SIM2 are both LTE SIM cards, the pri-
mary SIM supports 4G/3G/2G networks, while the
secondary SIM can only support 3G/2G. For more
information on your SIM cards, contact your service
provider.
Camera
Infrared
sensor
Loudspeaker
Microphone
EN
Flash
USB connector
Microphone
SIM card slot
Proximity sensor
Earpiece
Fingerprint
sensor
Power/Lock key
2. Charge the battery and switch
the phone on
Plug a compatible charger into a wall outlet, and
connect the cable to your phone. Your phone
supports the USB-C cable. You can also charge your
phone from a computer with a USB cable, but it may
take a longer time.
If the battery is completely discharged, it may take
several minutes before the charging indicator is
displayed.
To switch your phone on, press and hold the power
key until the phone vibrates. The phone guides you
through the setup.
USB-C
USB micro-B
For an online user guide and troubleshooting help,
go to www.nokia.com/mobile-support.
Front camera
Volume keys