Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to
Wear protective
instructions
gloves
1. SAFETY
WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this
storage system.
Locate in a suitable work area.
9
Keep the work area clean, uncluttered and ensure there is adequate lighting.
9
WARNING! Use storage on level and solid ground, preferably concrete.
Keep the storage system clean and tidy in accordance with good workshop practice.
9
Keep children and unauthorised persons away from the work area.
9
DO NOT use the storage system for any purpose other than that for which it is designed.
8
DO NOT use the storage system outdoors.
8
DO NOT place the storage system in a damp or wet location or an area where there is condensation.
8
DO NOT clean the storage system with any solvents which may damage the surfaces or the protective coating.
8
DO NOT move the storage system when there are items placed inside.
8
DO NOT step on the shelves.
8
DO NOT overload the storage system.
8
2. INTRODUCTION
APMS64
Modular storage system ideal for any garage/workshop. Durable construction that will last for years. Easily adjusts to specific needs. Purchase
a simple base cabinet or create a full workshop storage system. Standard features include: Modular design to enable easy upgrading. Tough
and durable construction with a hammered metal finish on the doors and drawers. Aluminium handles and drawer pulls. All drawers come with
protective drawer liners. Supplied fully assembled. Ball bearing slides throughout. Choice of worktop - pressed wood or stainless steel. All
pieces are fully welded except Model No's APMS55, APMS56 and APMS60 Floor Cabinets which require simple assembly. Each unit supplied
with a lock and two keys (except wall cabinets).
APMS65
For use with Model No's APMS51, APMS52, APMS57, APMS59, APMS64 Floor Cabinets. Supplied with appropriate fixings to make integral
self-supporting unit, or use in conjunction with Model No. APMS50BP Back Panel and upright supports if part of a larger modular system. Two
door cabinet with a high-quality lock supplied with two keys. Aluminium handles.
3. SPECIFICATION
Model No:................................................................APMS64
Overall Size: .........................................1360 x 460 x 910mm
Small Draw (x5): .......................................800 x 400 x 55mm
Medium Draw (x1): ..................................800 x 400 x 135mm
Large Draw (x1): .....................................1250 x 400 x 85mm
Cupboard: ...............................................510 x 620 x 420mm
MODEL NO: ........................................................... APMS65
Overall Size (W x D x H): ........................680 x 280 x 350mm
4. ASSEMBLY
© Jack Sealey Limited
1360MM MODULAR 7 DRAWER FLOOR
CABINET & 680MM 2 DOOR MODULAR WALL
CABINET
APMS64 & APMS65
MODEL NO:
Original Language Version
APMS64 & APMS65 Issue 1 23/02/2021
fig.1