Related Manuals for NEC IE-703003-MC-EM1
Summary of Contents for NEC IE-703003-MC-EM1
- Page 1 Preliminary User’s Manual IE-703003-MC-EM1 IN-CIRCUIT EMULATOR OPTION BOARD Target device V853 Document No. U11596EJ3V0UM00 (3rd edition) Date Published April 1997 N © 1996 Printed in Japan...
- Page 2 The information in this document is subject to change without notice. No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Corporation. NEC Corporation assumes no responsibility for any errors which may appear in this document.
- Page 3 Some information contained in this document may vary from country to country. Before using any NEC product in your application, pIease contact the NEC office in your country to obtain a list of authorized representatives and distributors. They will verify: Device availability •...
- Page 4 Emulation Memory Capacity is modified in 1.3 Function Specifications (When connected to IE- 703002-MC). Target Connection Socket is modified from YQSOCKET100SDF to YQSCKETSDN in 1.4 System Configuration. Insertion guides is modified to 4 in Figure 1-4. (c) Connecting part (IE-703003-MC-EM1). 3.3 NMI Signal Addition of Description The mark shows major revised points.
- Page 5 [MEMO]...
- Page 6 READERS This manual is intended for users who design and develop application systems using the V853. PURPOSE The purpose of this manual is to describe the proper operation of the IE-703003-MC-EM1 and its basic specifications. ORGANIZATION This manual is broadly divided into the following parts: •...
- Page 7 TERMINOLOGY The meaning of terms used in this manual is listed below. Target device Device that is emulated. Target system The system (user-built system) to be debugged. This includes the target program and user- configured hardware. RELATED DOCUMENTS Some of the related documents listed below may be preliminary editions, but are not noted as such. { Documents related V853 Document Document Number...
-
Page 8: Table Of Contents
1.1 Hardware Configuration ......................... 1.2 Features..............................1.3 Function Specifications ......................... 1.4 System Configuration..........................1.5 Contents in Carton..........................1.6 Connection between IE-703002-MC and IE-703003-MC-EM1 .............. CHAPTER 2 IE-703002-MC SETTING....................2.1 Settings of JP2, SW1, and SW2 ......................2.2 Settings of JP1, JP3, and JP4........................ - Page 9 List of Figures Figure No. Title Page 1-1. System Configuration ............................ 1-2. Contents in Carton............................1-3. Accessories ..............................1-4. Connection between IE-703002-MC and IE-703003-MC-EM1..............3-1. NMI Signal-Flow Path............................ 3-2. X1 Signal-Flow Path ............................- ii -...
- Page 10 List of Tables Table No. Title Page 2-1. Settings of JP2, SW1, and SW2........................2-2. Settings of JP1, JP3, and JP4........................3-1. Memory Capacity Limitation List ........................- iii -...
- Page 11 [MEMO] - iv -...
-
Page 12: Chapter 1 Overview
CHAPTER 1 OVERVIEW The IE-703003-MC-EM1 is an optional board for the in-circuit emulator IE-703002-MC for the V851 and V852. By connecting the IE-703003-MC-EM1 and IE-703002-MC, hardware and software can be debugged efficiently in system development using the V853. In this manual, the basic setup sequences and switch settings of the IE- 703003-MC are described. -
Page 13: Features
• Pod tip direct connection (For information on the pod, refer to the IE-703002-MC User’s Manual ) • Attach an extension probe (optional) to the pod tip for connection. { Dimensions of the option board (IE-703003-MC-EM1) are as follows. Parameter... -
Page 14: System Configuration
<3> PC interface board (IE-70000-98-IF-B, IE-70000-PC-IF-B: optional) <4> PC interface cable (included with IE-703002-MC) <5> IE-703002-MC (In-circuit emulator) <6> IE-703003-MC-EM1 (Option board) <7> External logic probe (included with IE-703002-MC) <8> Socket for target connection (YQSOCKET100SDF: included with IE-703002-MC) <9> Extension probe (SC-100SD: Optional) <10>... -
Page 15: Contents In Carton
CHAPTER 1 OVERVIEW 1.5 Contents in Carton The carton of the IE-703003-MC-EM1 contains a main unit, guarantee card, packing list, and accessory bag. Make sure that the accessory bag contains this manual and connector accessories. In case of missing or damaged contents, please contact an NEC sales representative or NEC dealer. - Page 16 CHAPTER 1 OVERVIEW Check that the accessory bag contains this manual, an accessory list, and the following accessories. (a) Connector for target connection (NQPACK100SD) × 1 set (including NQGUIDE 3 pcs., screw driver × 1 pc.) (b) Plastic screws × 4 pcs. (including nuts and washer ×...
-
Page 17: Connection Between Ie-703002-Mc And Ie-703003-Mc-Em1
<2> Set the PGA socket lever of the IE-703003-MC-EM1 to the OPEN position as shown in Figure 1-4 (b). <3> Connect the IE-703003-MC-EM1 to the PGA socket at the back of the pod (refer to Figure 1-4 (c)). When connecting, position the IE-703002-MC and IE-703003-MC-EM1 so that they are horizontal. - Page 18 CHAPTER 1 OVERVIEW Figure 1-4. Connection between IE-703002-MC and IE-703003-MC-EM1 (2/2) (b) PGA Socket Lever of IE-703003-MC-ME1 CLOSE OPEN (c) Connecting part (IE-703003-MC-EM1) Pin A1 location : Insertion guide : IE-703002-MC insertion area...
- Page 19 [MEMO]...
-
Page 20: Chapter 2 Ie-703002-Mc Setting
CHAPTER 2 IE-703002-MC SETTING This chapter describes settings of the IE-703002-MC when the IE-703003-MC-EM1 is connected. All settings are performed using the jumper and switches in the pod of the IE-703002-MC. For the location of the pod, jumper, and switches, refer to the IE-703003-MC User’s Manual Hardware. -
Page 21: Settings Of Jp1, Jp3, And Jp4
CHAPTER 2 IE-703002-MC SETTING 2.2 Settings of JP1, JP3, and JP4 Set the JP1, JP3, and JP4 in the pod as follows. Table 2-2. Settings of JP1, JP3, and JP4 Jumper Status Note 1, 2 Open Short Note 1 1-2 short Notes 1. -
Page 22: Chapter 3 Cautions
CHAPTER 3 CAUTIONS 3.1 Internal RAM and ROM Because the internal RAM (iRAM) and internal ROM (iROM) capacity of the IE-703002-MC are set in steps, the memory capacity is different from that of the target device. If access is performed to addresses that exceed the target device capacity, the memory of the IE-703002-MC is accessed. -
Page 23: Nmi Signal
I/O device 3.4 X1 Signal The X1 signal from the target system is delayed because it passes through VHCT08 before being input into the evaluation chip of the IE-703003-MC-EM1. (t = 8 ns (MAX.), t = 9 ns (MAX.)) Moreover, DC characteristics are changed to input voltage V = 2.0 V (MIN.), V... -
Page 24: Appendix Dimensions
APPENDIX DIMENSIONS IE-703002-MC + IE-703003-MC-EM1 (Unit: mm) Top View Pin 1 direction Side View IE-703002-MC IE-703003-MC-EM1 Bottom View 15.24 Top View 21.5... - Page 25 [MEMO]...
- Page 26 [MEMO]...
- Page 27 [MEMO]...
- Page 28 Facsimile Message Although NEC has taken all possible steps to ensure that the documentation supplied to our customers is complete, bug free and up-to-date, we readily accept that From: errors may occur. Despite all the care and precautions we've taken, you may Name encounter problems in the documentation.