hit counter script
NEC NP1250 Network Setup Manual
  1. Manuals
  2. Brands
  3. NEC Manuals
  4. Projector
  5. NP1250 Series
  6. Network setup manual
NEC NP1250 Network Setup Manual

NEC NP1250 Network Setup Manual

Nec np1250: network guide
Hide thumbs Also See for NP1250:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Command Manual, User Manual
NEC Projector
NP3250/NP2250/
NP1250/NP3250W
Wired and Wireless Network Setup Guide
Information on USB Wireless LAN:
In some areas and countries, the projector models described in this manual are distributed
without a USB Wireless LAN unit as standard.
If you purchase the projector without the USB Wireless LAN Unit installed and need to
connect to the projector via a wireless connection, the optional USB Wireless LAN Unit
must be installed.
Install in the PC the software stored in the User Supportware 6 CD-ROM.
This manual describes the LAN settings to use the software programs included
in the supplied User Supportware 6 CD-ROM. For how to operate each software
6
program, refer to "User's Guide" (PDF) on User Supportware 6 CD-ROM.
1. What You Can Do with User
Supportware 6
2. Operating Environment
3. Connecting the LAN Cable
4. Configuring the LAN Settings
of the Projector
5. Configuring the LAN Settings of
the PC ([Example] Wireless LAN in
Windows Vista: Ad Hoc connection)
6. Configuring the LAN Settings of
the PC ([Example] Wireless LAN in
Windows XP: Ad Hoc connection)
7. Viewing the "User's Guide"
and Help
1
2
3
4
5
6
7

Advertisement

Table of Contents
loading

Related Manuals for NEC NP1250

Summary of Contents for NEC NP1250

  • Page 1 In some areas and countries, the projector models described in this manual are distributed without a USB Wireless LAN unit as standard. If you purchase the projector without the USB Wireless LAN Unit installed and need to connect to the projector via a wireless connection, the optional USB Wireless LAN Unit must be installed.
  • Page 2 (3) Great care has been taken in the preparation of this guide; however, should you notice any questionable points, errors or omissions, please contact us. (4) Notwithstanding article (3), NEC will not be responsible for any claims on loss of profit or other matters deemed to result from using the Projector.

  • Page 3: Important Information

    Important Information USB Wireless LAN Unit FCC Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B Personal Computer and Peripheral, pursuant to Part 15 of the FCC Rules.
  • Page 4 Guyane and La Reunion: outdoor use not allowed in band 2400 - 2420 MHz. Hereby, NEC Display Solutions, Ltd. declares that this USB Wireless LAN Unit (Model: NP01LM) is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.

  • Page 5: Cautions On Usage

    • Improper intrusions Malicious third parties may without permission access the personal or company network and steal personal or confidential information, pretend to be someone else and leak incorrect information, rewrite information that has been intercepted, introduce computer viruses or otherwise damage data or the system, etc. Wireless LAN cards and wireless access points generally include security measures for dealing with these problems.

  • Page 6: Specifications

    Transmission method Data Rates IEEE802.11g Center Frequency Range/Operating channels Transmission method Data Rates Interface USB 2.0 (connected to USB wireless LAN port on the projector) Dimensions Width:1.1"/28 mm Height:0.43"/11 mm Length:3.03"/77 mm Weight 0.042 lbs/19 g Environmental Operational Temperatures : Considerations 41°...
  • Page 7 Data Rates IEEE802.11g Center Frequency Range/Operating channels Transmission method Data Rates Interface USB 2.0 (connected to USB wireless LAN port on the projector) Dimensions Width:1.1"/28 mm Height:0.43"/11 mm Length:3.03"/77 mm Weight 0.042 lbs/19 g Environmental Operational Temperatures : Considerations 41° to 104°F / 5° to 40°C, 20% to 80% humidity (non-condensing) Storage Temperatures : 14°...

  • Page 8: Table Of Contents

    2-2. Supported wireless LAN security functions ...14 2-3. Operating Environment ...15 3. Connecting the LAN Cable ...16 4. Configuring the LAN Settings of the Projector ...17 4-1. Displaying On-Screen Menu (NETWORK SETTINGS) ...17 4-2. Wireless LAN ...19 4-3. Wired LAN ...28 5.

  • Page 9: What You Can Do With User Supportware 6

    Simultaneous projection by multiple projectors Images can be sent from a personal computer to not only one projector but also to two or more projectors at the same time.
  • Page 10 Using the Training Mode allows you to use a single personal computer (Manager) to manage which personal computer (Attendant) projects. Possible operation includes switching projecting personal computers to project from, as well as temporarily terminating communication with the projector. Attendant A Attendant B Note The Training Mode is not installed via the “Typical”...

  • Page 11: Desktop Control Utility 1.0

    (important documents), copying files, or turning off the power. NEC assumes no liability for any loss or damages arising from information leaks or system failures while you are using Desktop Control Utility 1.0.

  • Page 12: Arcsoft Mediaimpression

    ArcSoft MediaImpression in the User Supportware 6 CD-ROM has functions that allow you to use the projector more conveniently, in addition to the functions that come with the software, for when an NEC projector is connected.

  • Page 13: Viewer Ppt Converter 3.0

    PowerPoint). 1-5. PC Control Utility 3.0 PC Control Utility 3.0 is software that allows you to operate the projector from the personal computer when the personal computer and the projector are connected with LAN (wired or wireless) or a serial cable.

  • Page 14: Operating Environment

    2. Operating Environment 2. Operating Environment 2-1. Supported Projectors User Supportware 6 supports the following NEC projectors (as of April 2009) NP Series Reference Some of the software can be used with projectors other than the above projectors. For details, refer to the help function of each software.

  • Page 15: Operating Environment

    2-3. Operating Environment The following is the operating environment for Image Express Utility 2.0. For the operating environment of other software, please refer to the help function of each software. Supported OS Windows Vista (32-bit version) Home Basic Windows Vista (32-bit version) Home Premium Windows Vista (32-bit version) Business Windows Vista (32-bit version) Ultimate Windows Vista (32-bit version) Enterprise...

  • Page 16: Connecting The Lan Cable

    3. Connecting the LAN Cable 3. Connecting the LAN Cable Connect a LAN cable to the LAN port (RJ-45) of the projector when connecting the projector to wired LAN. After connecting the LAN cable to the projector, set the required settings for the projector next page).

  • Page 17: Configuring The Lan Settings Of The Projector

    4. Configuring the LAN Settings of the Projector Reference For details on how to turn on/off the power to the projector and how to operate the buttons and remote control of the projector, refer to “User’s Manual” included in the User’s Manual CD-ROM.
  • Page 18 4. Configuring the LAN Settings of the Projector Press the SELECT  Press the button. The “NETWORK SETTINGS” screen is displayed. • To make setting of wireless LAN Proceed to “4-2. Wireless LAN” ( • To make setting of wired LAN Proceed to “4-3.

  • Page 19: Wireless Lan

    Confirm the “ADVANCED” settings. Step Reconnect to the network. Step Confirm the settings. 4. Configuring the LAN Settings of the Projector If “Enabled” (with check mark) If “EASY CONNECTION” is selected Setting of “SECURITY” Select “SECURITY TYPE”. Select “KEY SELECT”.
  • Page 20 SELECT / <2> Use the • “PROFILE 1” or “PROFILE 2” can be stored in the memory of the projector as the setting for LAN. • “EASY CONNECTION” is a mode in which the personal computer that runs Image Express Utility 2.0 in the User Supportware 6 CD-ROM is easily connected to wireless LAN.
  • Page 21 CONFIGURATION” as necessary. After each item has been set, move the highlight to “ADVANCED” and press the Input “IP ADDRESS”. If “DHCP” is not checked, input the IP address assigned to the projector by the administrator of the network to which the projector is connected. SELECT ...
  • Page 22 4. Configuring the LAN Settings of the Projector Input “SUBNET MASK”. If “DHCP” is not checked, input the subnet mask of the network to which the projector is connected. The method of inputting is the same as that of the “IP ADDRESS” field.
  • Page 23 To connect an SSID that has WEP, WPA-PSK, or other security settings, the same setting must be made on the projector ( 4. Configuring the LAN Settings of the Projector button once to highlight “SITE SURVEY” and press the ... Personal computer (AD HOC) button to highlight the SSID of the network to connect to.
  • Page 24 4. Configuring the LAN Settings of the Projector Input or edit “SSID” (if necessary). SSID selected in “SITE SURVEY” are automatically input. If the highlight is moved to the “SSID” field and the is displayed and characters can be input or edited.
  • Page 25 If “WEP (64BIT)” or “WEP (128BIT)” is selected from “SECURITY TYPE”, select which of the following encryption keys, “KEY 1” to “KEY 4”, is to be used. 4. Configuring the LAN Settings of the Projector button to select the “CONNECTION” tab, and press the...
  • Page 26 4. Configuring the LAN Settings of the Projector Input “KEY 1” to “KEY 4” (only when WEP is selected). If “WEP (64BIT)” or “WEP (128BIT)” is selected from “SECURITY TYPE”, input an encryption key. Set the same encryption key as the wireless access point and personal computer to be connected by the wireless LAN.
  • Page 27 Confirm the settings. SELECT / <1> Use the The contents of the setting are stored in the memory of the projector. 4. Configuring the LAN Settings of the Projector button to highlight [OK] and press the button to highlight “RECONNECT” and press the button to highlight [OK] and press the button.

  • Page 28: Wired Lan

    4. Configuring the LAN Settings of the Projector 4-3. Wired LAN When connecting a LAN cable to the LAN port of the projector, configure the LAN settings in the “WIRED” page of “NETWORK SETTINGS” selected from On-Screen Menu. n Configuration flowchart Step Display “WIRED”...
  • Page 29 On-Screen Menu. If “NETWORK SETTINGS” is not displayed, refer to “4-1. Displaying On-Screen Menu (NETWORK SETTINGS)” ( Select “PROFILES”. “PROFILE 1” or “PROFILE 2” can be stored in the memory of the projector as the setting of LAN. SELECT  <1> Press the button.

  • Page 30: Configuring The Lan Settings Of The Pc ([Example] Wireless Lan In Windows Vista: Ad Hoc Connection)

    • Check the display of the Windows Vista taskbar. If a network connection utility dedicated to a wireless LAN unit or a wireless LAN card is running, terminate that utility. • Configure the wireless LAN settings of the projector. For details, refer to “4. Setting the LAN Settings of Projector” ( This section provides an example for when the projector is configured with the following wireless LAN settings.
  • Page 31 Click [Connect to a network]. A list of the networks you are able to connect to is displayed. From the list, click the SSID of the projector you want to connect to (“NECPJ” in this example), and click [Connect]. A screen for entering the security key is displayed.
  • Page 32 5. Configuring the LAN Settings of the PC When the screen shows “Successfully connected to NECPJ”, check “M Save this network” and click [Close]. “Set Network Location” window is displayed. Note • Unless “M Save this network” is checked, the Remote Desktop function will not operate normally. Click the location that matches the application (e.g., “Work”).
  • Page 33 Click [Use the following IP address], and input [IP address] and [Subnet mask]. • For example, if the [IP address] and [Subnet mask] of the projector are set as show in “Example of projector settings” on page 30, configure the personal computer as shown below.

  • Page 34: Configuring The Lan Settings Of The Pc ([Example] Wireless Lan In Windows Xp: Ad Hoc Connection)

    • Check the display of the Windows XP taskbar. If a network connection utility dedicated to a wireless LAN card is running, terminate that utility. • Configure the wireless LAN settings of the projector. For details, refer to “4. Configuring the LAN Settings of the Projector” ( This section provides an example for when the projector is configured with the following wireless LAN settings.
  • Page 35 6. Configuring the LAN Settings of the PC Right-click the [Wireless Network Connection] icon and click [Property]. The property window for wireless network connections is displayed. From the list of [This connection uses the following Items:], select (click) [Internet Protocol (TCP/IP)] and click [Properties]. Select •...
  • Page 36 Click [Use the following IP address:], and input [IP address]and[Subnet mask]. • For example, if the [IP address] and [Subnet mask] of the projector are set as show in “Example of projector settings” on page 34, configure the personal computer as shown below.
  • Page 37 Right-click the [Wireless Network Connection] icon and click [View Available Wireless Networks]. The “Wireless Network Connection” window is displayed. From the list, select SSID of the projector to connect to and click [Connect]. The “Wireless Network Connection” window is displayed. ([Example] Wireless LAN in Windows XP: Ad Hoc connection)
  • Page 38 Input WEP key to set up an encryption key and click [Connect]. • Enter the “WEP” encryption key. For example, if the WEP setting on the projector is set to “64-bit” and Key 1 on the projector is set to “NECDS”, enter “NECDS” in the Network key field.

  • Page 39: Viewing The "User's Guide" And Help

    7. Viewing the “User’s Guide” and Help Each software program in User Supportware 6 contains a help file that explains the functions and operation methods in detail. The “User’s Guide” (PDF) also explains the basic operation procedure of each software program carefully.
  • Page 40 7. Viewing the “User’s Guide” and Help Reference If the above menu is not displayed, follow these steps. (*Example when Windows Vista is used) 1. Click [Start] in Windows. 2. Click [All programs] → [Accessories] → [Run]. 3. In the [Open:] field, enter the CD-ROM drive name *1 (e.g., “Q:\”) followed by “SETUP. EXE”...

  • Page 41: Using Help

    CD-ROM. n Displaying Help files other than ArcSoft MediaImpression Click in the following order. Start All Programs NEC Projector User Supportware Desktop Control Utility 1.0 Image Express Utility 2.0 PC Control Utility 3.0 Viewer PPT Converter 3.0 Reference You can also display the Help by starting each program and clicking the [Help] menu or [Help] icon of that program.

  • Page 42: Help Screen Layout

    Click [All Programs] in the start menu → [ArcSoft MediaImpression] → [MediaImpression], in that order. The ArcSoft MediaImpression will start. From the ArcSoft MediaImpression menu bar, select [Extras] → [MediaImpression Help] or [NEC Projector User Supportware Help]. n Help Screen Layout [Hide] button Shows/hides the left pane.
  • Page 43 Other manufacturer names and product names in this document are registered trademarks or trademarks of the respective companies. ©NEC Display Solutions, Ltd. 2009 Reproduction, modification, and other uses are prohibited without the permission of NEC Display Solutions, Ltd. First edition April 2009...

  • Page 44: User Supportware

    NEC Projector User Supportware 6 ■ Image Express Utility 2.0 ■ Desktop Control Utility 1.0 ■ ArcSoft MediaImpression ■ Viewer PPT Converter 3.0 ■ PC Control Utility 3.0...

This manual is also suitable for:

Np2250Np3250Np3250w

Table of Contents