Steps
1
Locate the WWAN slot on your computer.
2
Slide the WWAN card into the slot on your computer.
3
Reconnect the WWAN cables to the WWAN card module.
4
Place the WWAN metal bracket on the WWAN card module.
5
Replace the single (M2x3) screw to secure the module to the computer.
Next step
1
Install the battery.
2
Install the
base
cover.
3
Follow the procedure in
Hard disk drive
Removing the Hard drive
Prerequisites
1
Follow the procedure in
2
Remove the
base
cover.
32
Disassembly and reassembly
After working inside your
computer.
Before working inside your
computer.