Steps
1
Locate the system board slot on your computer.
2
Align and install the HDD into the computer
3
Install the four (M2x2.7) screws that secure the HDD to the computer.
4
Connect the HDD cable on to the connector on the system board.
Next step
1
Install the battery.
2
Install the
base
cover.
3
Follow the procedure in
Coin-cell battery
Removing the Coin-cell
Prerequisites
1
Follow the procedure in
2
Remove the
base
cover.
3
Remove the battery.
About this task
The figure indicates the location of the Coin-cell and provides a visual representation of the removal procedure.
34
Disassembly and reassembly
After working inside your
computer.
Before working inside your
computer.