Download Print this page

Removing The M.2 2280 Solid-State Drive - Dell P90F Service Manual

Hide thumbs Also See for P90F:

Service manual (83 pages)

Setup and specifications manual (40 pages)

Setup and specifications (23 pages)

Table Of Contents

100

101

102

103

104

Table of Contents

Steps

1. Place the M.2 2230 solid-state drive on the M.2 thermal shield.

2. Align the screw hole on the M.2 2230 solid-state drive to the screw mount on the M.2 thermal shield.

3. Replace the screw (M2x2) that secures the M.2 2230 solid-state drive to the M.2 thermal shield.

4. Align the notch on the M.2 2230 solid-state drive with the tab on the M.2 card slot on the system board.

5. Slide the M.2 2230 solid-state drive and M.2 thermal shield into the M.2 card slot on the palm-rest and keyboard assembly.

6. Align the screw holes on the M.2 thermal shield to the screw holes on the palm-rest and keyboard assembly.

7. Replace the screw (M2x2.2) that secures the M.2 thermal shield to the palm-rest and keyboard assembly.

8. Tighten the captive screw (M2x4) that secures the M.2 thermal shield to the palm-rest and keyboard assembly.

Next steps

1. Install the

base

cover.

2. Follow the procedure in