Dell P90F Service Manual page 89
Hide thumbs
Also See for P90F:
- Service manual (83 pages) ,
- Setup and specifications manual (40 pages) ,
- Setup and specifications (23 pages)
Table of Contents
Advertisement
Table 12. System setup options—Performance menu (continued)
Performance
Intel SpeedStep
Intel TurboBoost Technology
Multi-Core Support
Enable C-State Control
Table 13. System setup options—Power Management menu
Power Management
Wake on AC
Enable USB Wake Support
Auto on Time
Battery Charge Configuration
Enable Advanced Battery Charge
Configuration
Block Sleep
Enable Intel Speed Shift Technology
Peak Shift
Enables or disables the Intel SpeedStep Technology to dynamically adjust
processor voltage and core frequency, decreasing average power consumption
and heat production.
Default: ON.
Enabled or disabled the Intel TurboBoost mode of the processor. If enabled,
the Intel TurboBoost driver increases the performance of the CPU or graphics
processor.
Default: ON.
Changes the number of CPU cores available to the operating system. The
default value is set to the maximum number of cores.
Default: All Cores.
Enables or disables the CPU's ability to enter and exit low-power states.
Default: ON.
Enables the computer to turn on and go to boot when AC power is supplied to
the computer.
Default: OFF.
Enables the USB devices to wake the computer from Standby.
Default: OFF.
Enables the computer to automatically power on for defined days and times.
Default: Disabled. The system will not automatically power up.
Enables the computer to run on battery during power usage hours. Use the
below options to prevent AC power usage between certain times of each day.
Default: Adaptive. Battery settings are adaptively optimized based on your
typical battery usage pattern.
Enables Advanced Battery Charge Configuration from the beginning of the
day to a specified work period. Advanced Battery Charged maximizes battery
health while still supporting heavy use during the work day.
Default: OFF.
Blocks the computer from entering Sleep (S3) mode in the operating system.
Default: OFF.
NOTE:
If enabled, the computer will not go to sleep, Intel Rapid Start will
be disabled automatically, and the operating system power option will be
blank if it was set to Sleep.
Enables or disables Intel Speed Shift Technology support which enables
the operating system to select the appropriate processor performance
automatically.
Default: ON.
Enables or disables the Peak Shift function which automatically switches the
computer to battery power even if the power adapter is connected.
Default: ON.
System setup
89
- Quick Links:
- Removing the Base Cover
- Solid-State Drive
Hide quick links:
Advertisement
Table of Contents
