Keyboard; Removing The Keyboard - Dell Alienware m15 R4 Service Manual
Hide thumbs
Also See for Alienware m15 R4:
- Setup and specifications (21 pages) ,
- Setup and specifications (21 pages)
Table of Contents
Advertisement
Steps
1. Place the power-button assembly and its cable in the slot on the palm-rest assembly.
2. Place the power-button bracket on the power-button assembly.
3. Align the screw holes on the power-button bracket to the screw holes on the palm-rest assembly.
4. Replace the three (M2x1.9) screws that secure the power-button bracket to the palm-rest assembly.
5. Adhere the power-button assembly cable on the palm-rest assembly.
Next steps
1. Follow the procedure from step 3 to step 24 in
2. Install the
right
I/O-board.
3. Install the
rear
I/O-cover.
4. Install the
M.2 2230 solid-state
5. Install the
M.2 2280 solid-state
6. Install the battery.
7. Install the
base
cover.
8. Follow the procedure in
Keyboard
Removing the keyboard
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the battery.
4. Remove the
M.2 2230 solid-state
5. Remove the
M.2 2280 solid-state
6. Remove the
rear
I/O-cover.
7. Remove the speakers.
8. Remove the
right
I/O-board.
Installing the system
drive, if applicable.
drive, if applicable.
After working inside your
Before working inside your
drive, if applicable.
drive, if applicable.
board.
computer.
computer.
61
Advertisement
Table of Contents
