Advertisement
Quick Links
Download this manual
See also:
User Manual
V461 Installation Guide
46" LCD Display
Product Description and Notes
Tilt Angle and Rotation
Ventilation Requirements
Display Dimensions
Front, Top & Right Side
Rear & Bottom
Display Dimensions w/Optional Speakers and Stand
Table Top Stand Dimensions
Optional Speaker Dimensions
Optional Wall Mount Dimensions (WMK3260)
Optional Wall Mount Dimensions (WMK3257)
Input Panel
Control Codes
Type:
Resolution:
Aspect Ratio:
FCC:
Power Consumption:
BTU's:
NOTES:
This document is intended to be used as a reference guide to supply useful information for a design or installation. It is not
•
intended to be a step-by step procedure for installation.
Any ceilings or walls must be strong enough to support the monitor and the installation must be in accordance with any local
•
building codes. All mounts should make secure contact to wood studs.
4:3 sources can be displayed on the 16:9 screen in either normal aspect ratio with bars on the left or right, or stretched horizontally
•
to fill the screen using the menus (see "Aspect Modes" in menus and user manual).
Distances are in inches, for millimeters multiply by 25.4.
•
Distances may vary ±5%.
•
Below are the maximum angles that the monitor can be tilted in the landscape position only.
Landscape 20deg
Max. 20 deg
www.necdisplay.com
LCD Display
1920 x 1080
16:9
Class B
185W (typ)
631.25 BTU/hour
NEC Display Solutions of America, Inc.
Page 1
Page 1
Page 2
Page 3
Page 4
Page 5
Page 6
Page 7
Page 8
Page 9
Page 10
Page 11
Screen Surface:
Dimensions without stand: 44.2"(W) x 26.2"(H) x 5.1"(D)
Dimensions with stand:
Weight without stand:
Weight with stand:
V461
Rev 1.0
Anti-Reflective
44.2"(W) x 22.9"(H) x 13.0"(D)
52.9 lbs
56.9 lbs
Page 1 of 11
Advertisement
Related Manuals for NEC V461-2-R
Summary of Contents for NEC V461-2-R
- Page 1 Distances may vary ±5%. • Below are the maximum angles that the monitor can be tilted in the landscape position only. Landscape 20deg Max. 20 deg www.necdisplay.com NEC Display Solutions of America, Inc. Page 1 Page 1 Page 2 Page 3 Page 4...
- Page 2 The ventilation space should not be covered or closed off at the front of the opening. If for some reason the opening needs to be • covered, other means of ventilation will need to be incorporated into the design. Contact NEC for design review and recommendations.
- Page 3 NEC Display Solutions of America, Inc. V461 Installation Guide 46” LCD Display Rev 1.0 www.necdisplay.com V461 Page 3 of 11...
- Page 4 NEC Display Solutions of America, Inc. V461 Installation Guide 46” LCD Display Rev 1.0 www.necdisplay.com V461 Page 4 of 11...
- Page 5 NEC Display Solutions of America, Inc. V461 Installation Guide 46” LCD Display Rev 1.0 www.necdisplay.com V461 Page 5 of 11...
- Page 6 NEC Display Solutions of America, Inc. V461 Installation Guide 46” LCD Display Rev 1.0 www.necdisplay.com V461 Page 6 of 11...
- Page 7 NEC Display Solutions of America, Inc. V461 Installation Guide 46” LCD Display Rev 1.0 www.necdisplay.com V461 Page 7 of 11...
- Page 8 NEC Display Solutions of America, Inc. V461 Installation Guide 46” LCD Display Rev 1.0 www.necdisplay.com V461 Page 8 of 11...
- Page 9 NEC Display Solutions of America, Inc. V461 Installation Guide 46” LCD Display Rev 1.0 www.necdisplay.com V461 Page 9 of 11...
- Page 10 NEC Display Solutions of America, Inc. V461 Installation Guide 46” LCD Display Rev 1.0 Bottom: Detail: www.necdisplay.com V461 Page 10 of 11...
- Page 11 SCREEN MODE: NORMAL FULL WIDE ZOOM AUTO SETUP EXECUTE FILM MODE AUTO NOTE: Contact your NEC rep for codes not listed. NOTE: Use a cross/reverse/null modem cable. Interface: RS-232C Communication: Asynchronous Baud Rate: 9600 bps Data Length: 8 bits Note: If so desired, jumper “Request to Send”...