Table of Contents
Advertisement
Steps
1. Place the heat sink on the system board and align the screw holes with the ones on the system board.
2. Replace the seven (M2x3) screws to secure the heat sink to the system board.
Next steps
1. Install the
base
cover.
2. Exit
service
mode.
3. Install the
SD
card.
4. Follow the procedure in
Speakers
Removing the speakers
Prerequisites
1. Follow the procedure in
2. Remove the
SD
card.
3. Enter
service
mode.
4. Remove the
base
cover.
About this task
The following images indicate the location of the speakers and provides a visual representation of the removal procedure.
after working inside your
before working inside your
computer.
computer.
Removing and installing components
41
Advertisement
Table of Contents
