Table of Contents
Advertisement
Remove the screw that secures the board to the support
3.
bracket.
4. Pull the board out of the connector. Gently rock the
board from side-to-side to release it from its connector.
5. Replace the slot cover that was removed when the option
board was installed.
Replace the system unit cover.
6.
Removing an Expansion Board from the Inside Slot
Use this procedure if removing an expansion board from the
inside slot in your system.
Remove the system unit cover.
1.
Label and remove any cables from the expansion board.
2.
Removing the screw
Installing Options 3-15
Advertisement
Table of Contents
