hit counter script
Dell Networking 7048 Release Note
  1. Manuals
  2. Brands
  3. Dell Manuals
  4. Switch
  5. Networking 7048
  6. Release note
Dell Networking 7048 Release Note

Dell Networking 7048 Release Note

5.1.0.1 firmware release notes
Hide thumbs Also See for Networking 7048:
Table of Contents

Advertisement

Quick Links

See also: Reference Manual , Configuration Manual
Dell™ PowerConnect™
8132/8164/8132F/8164F/7024/7048/7024P/7048P/7024F/7048R/
7048R-RA/8024/8024F/M6220/M6348/M8024/M8024-k
PowerConnect
5.1.0.1 Firmware Release Notes
Date: April 2013
System Firmware Version 5.1.0.1
Information in this document is subject to change without notice.
© 2003 – 2013 Dell Inc. All rights reserved.
Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.
Trademarks used in this text: Dell, the DELL logo and PowerConnect are trademarks of Dell Inc; Intel and Pentium are registered trademarks and
Celeron is a trademark of Intel Corporation; Microsoft and Windows are registered trademarks of Microsoft Corporation.
Other trademarks and trade names may be used in this document to refer to either the entity claiming the marks and names or their products. Dell
Inc. disclaims any proprietary interest in trademarks and trade names other than its own. All rights reserved. This document may not, in whole or
in part, be copied, photocopied, reproduced, translated, or reduced to any electronic medium or machine-readable form without the prior written
consent of Dell. Dell reserves the right to make changes without further notice to any products or specifications referred to herein to improve
reliability, functionality or design.
Reproduction, adaptation or translation without prior written permission is prohibited, except as allowed under the copyright laws.

Advertisement

Table of Contents
loading

Related Manuals for Dell Networking 7048

Summary of Contents for Dell Networking 7048

  • Page 1 Celeron is a trademark of Intel Corporation; Microsoft and Windows are registered trademarks of Microsoft Corporation. Other trademarks and trade names may be used in this document to refer to either the entity claiming the marks and names or their products. Dell Inc.

  • Page 2: Table Of Contents

    Table of Contents I n t r o d u c t i o n G l o b a l S u p p o r t F i r m w a r e S p e c i f i c a t i o n s F i r m w a r e U p g r a d e F i r m w a r e D o w n g r a d e B o o t C o d e D o w n g r a d e...

  • Page 3: Introduction

    PowerConnect 8132/8164/8132F/8164F/8024/8024F/M8024/M8024-k/ M6220/M6348/7024/7048/7024P/7048P/7024F/7048R/7048R-RA Release Notes Introduction This document provides specific information for the Dell PowerConnect 8132/8164/8132F/8164F/7024/7048/7024P/7048P/7024F/7048R/7048R-RA/8024/8024F/M6220/M6348/M8024/M8024-k switches firmware version 5.1.0.1. It is recommended that this release note be thoroughly reviewed prior to installing or upgrading of this product. Global Support For information regarding the latest available firmware, release note revisions, or additional assistance, please visit support.dell.com.

  • Page 4: Firmware Upgrade

    Firmware Upgrade Administrators upgrading PowerConnect 7024/7048/7024P/7048P/7024F/ NOTE: 7048R/7048R-RA/8024/8024F/M6220/M6348/M8024/M8024k switches from 2.x.x.x or 3.x.x.x or 4.x.x.x or 5.0.x.x versions of firmware MUST follow the instructions documented in the Upgrading PowerConnect Switches from Version 2.x.x.x or 3.x.x.x or 4.x.x.x or 5.0.x.x to 5.1.0.1 Firmware procedure. Failure to follow the procedures described in that document when upgrading from 2.x.x.x or 3.x.x.x or 4.x.x.x or 5.0.x.x firmware may result in an inoperable switch! After upgrading the switch firmware version to 5.1.0.1, the CPLD (Complex...

  • Page 5: Firmware Downgrade

    PowerConnect 8132/8164/8132F/8164F/8024/8024F/M8024/M8024-k/ M6220/M6348/7024/7048/7024P/7048P/7024F/7048R/7048R-RA Release Notes Firmware Downgrade Downgrading from 5.1.0.1 to an earlier release is supported on most PowerConnect series switches (except PC81xx series with B1 CPU versions, see note below); however, migration of configuration information from a later release to an earlier release is not supported.

  • Page 6: Boot Code Downgrade

    Boot Code Downgrade Never downgrade the boot code! The 5.1.0.1 boot code supports all earlier versions of firmware and never needs downgrading. Hardware Supported • Dell PowerConnect 8132 Ethernet Switch • Dell PowerConnect 8164 Ethernet Switch • Dell PowerConnect 8132F Ethernet Switch •...

  • Page 7: Support Matrix

    PowerConnect switch models. A check mark indicates support for the feature. All other features listed in the release notes are supported on all switches. Priority DCBx PoE+ iSCSI grEEEn WRED Feature/Switch Flow Optimization Ethernet Swap Control Cards Dell PowerConnect M6220 Ethernet Switch   Dell PowerConnect M6348 Ethernet Switch      Dell PowerConnect 7024 Ethernet Switch ...

  • Page 8: Supported Firmware Functionality

    Supported Firmware Functionality For more details regarding all the supported firmware features and functionality, please refer to the Dell PowerConnect Series CLI Reference Guide and the Dell PowerConnect Series User’s Configuration Guide. System Firmware Version 5.1.0.1...

  • Page 9: Added Functionality In This Release

    PowerConnect 8132/8164/8132F/8164F/8024/8024F/M8024/M8024-k/ M6220/M6348/7024/7048/7024P/7048P/7024F/7048R/7048R-RA Release Notes Added Functionality in this Release This section contains a list of features added in this release that are new for at least one switch listed in the Hardware Supported section above. Release 5.1.0.1  IGMP Snooping Improvements ...

  • Page 10: Cli Reference Guide Update

     Change Dell EqualLogic iSCSI Auto Detect to default  Add CLI Macro (Port Profile) for Dell Compellent Storage Equipment  Provide Dell EqualLogic DCBx TLV Auto Detect and Configuration on M8024-k/8024/8024F Release 4.1.1.9  No Added Functionality in this Release Release 4.1.0.19...
  • Page 11 PowerConnect 8132/8164/8132F/8164F/8024/8024F/M8024/M8024-k/ M6220/M6348/7024/7048/7024P/7048P/7024F/7048R/7048R-RA Release Notes  Auto-Install USB based auto-install is an easy way to quickly bring up a switch with a known configuration. Network based auto- install is useful in rolling out a configuration or firmware update to a group of switches or in maintaining a central repository of switch configurations and firmware where the switches always obtain their firmware and configuration from a central server.

  • Page 12: Multicast Vlan Registration

    Dell EqualLogic servers or iSCSI initiator ports to other ports or switches. Detection of Dell EqualLogic arrays is keyed on receipt of the mandatory System Description TLV in the LLDP packet. Disabling LLDP will effectively disable Dell EqualLogic array detection.
  • Page 13 PowerConnect 8132/8164/8132F/8164F/8024/8024F/M8024/M8024-k/ M6220/M6348/7024/7048/7024P/7048P/7024F/7048R/7048R-RA Release Notes Dell EqualLogic arrays are required to be upgraded to firmware 5.0.2 or later in order to use the iSCSI Optimization feature.  LLDP Administrators should ensure that LLDP-MED is enabled in order to operate EEE. Disabling LLDP or LLDP-MED will effectively disable EEE, IEEE 802.3at PoE+ high power negotiation and Dell EqualLogic array detection in the...
  • Page 14  Strong Passwords The strong passwords feature allows administrators to specify that local switch passwords meet certain characteristics considered to enhance network security. Administrators are advised that the minimum character classes configuration must be enabled (value equal to 1 or greater) along with enabling the strong password feature before the other minimum character class configurations are enforced.
  • Page 15 PowerConnect 8132/8164/8132F/8164F/8024/8024F/M8024/M8024-k/ M6220/M6348/7024/7048/7024P/7048P/7024F/7048R/7048R-RA Release Notes The IAS database can be downloaded to the switch using the “ias-users” target in the copy command. The ias-users file takes the form of a configuration script, as follows: configure aaa ias-user username client-1 password my-password1 exit aaa ias-user username client-2 password aa5c6c251fe374d5e306c62496c3bcf6 encrypted...
  • Page 16 This section contains commentary on significant differences from previous releases of firmware on PowerConnect switches, e.g. the 8132/8164/8132F/8164F/7024/7048/7024P/7048P/7024F/7048R/7048R-RA/M6348/M6220/M8024/8024/8024F/M8024-k switches. Dell PowerConnect series switches closely conform to networking industry standard operational capabilities and administrative interfaces. The differences below should be studied carefully as attempting to configure or operate the...
  • Page 17 Stacking is supported over standard Ethernet SFP+ ports. The ports must be configured as stacking ports.  iSCSI Default Changes iSCSI optimization is enabled by default. iSCSI optimization will reconfigure ports that are attached to Dell EqualLogic arrays to utilize spanning-tree portfast and unicast storm disable.
  • Page 18  New Web Interface The Web interface has been enhanced with new navigation features for ease of use.  CLI Syntax Changes The CLI has changed significantly to be compatible with the PowerConnect switch standard CLI. Configurations for previous releases may not be compatible with this release and may need to be updated. Refer Configuration Migration document for more info.
  • Page 19 PowerConnect 8132/8164/8132F/8164F/8024/8024F/M8024/M8024-k/ M6220/M6348/7024/7048/7024P/7048P/7024F/7048R/7048R-RA Release Notes  Spanning Tree Changes Administrators may assign more than 1024 VLANs to MSTP instances. Only VLANs that are configured on the switch will forward traffic. The PowerConnect switches implements the 802.1Q-2005 standard which builds on 802.1D-2004. 802.1D-2004 incorporates the 802.1t, 802.1w and 802.1s revisions.

  • Page 20: Dhcp Relay

    Switchport Mode Configuration Preserved: When switching between switchport modes (access, trunk, and general), the switchport configuration applicable to the selected mode is maintained. This means that when switching from one mode to another and back, the port will have the same configuration as it had in the original mode. Only the configuration applicable to the selected mode is active on the port.
  • Page 21 PowerConnect 8132/8164/8132F/8164F/8024/8024F/M8024/M8024-k/ M6220/M6348/7024/7048/7024P/7048P/7024F/7048R/7048R-RA Release Notes The operator has the ability to enable DHCP Relay Information Options both globally and on a physical interface. The interface configuration overrides the global configuration for the selected interface. Relay Information Option Check: When DHCP Option-82 insertion is enabled for a relay agent, the server should echo received Option 82 unaltered back toward the client.
  • Page 22 • LLDP-MED Capabilities TLV This TLV allows the network connectivity device to definitively determine whether particular connected devices do support LLDP-MED and to discover which specific LLDP-MED TLVs the particular end point devices are capable of supporting as well as what specific device class they belong to. •...

  • Page 23: I S S U E S R E S O L V E

    PowerConnect 8132/8164/8132F/8164F/8024/8024F/M8024/M8024-k/ M6220/M6348/7024/7048/7024P/7048P/7024F/7048R/7048R-RA Release Notes The PowerConnect M8024-k is the only modular switch that defaults to the simple mode of operation. Simple mode contains a restricted set of commands suitable for control of a port aggregation device that can be deployed in a network without requiring updates to the network by a network administrator.
  • Page 24 All 5.0 supported http[s] authentication HTTPS authentication through parse RADIUS server response platforms against RADIUS only RADIUS grants only read-only properly allows privilege level 1 access. access Get the mask from the All 5.0 supported SNMP v1/2 community When a subnet IP is set as community IP address platforms manager address no longer...
  • Page 25 PowerConnect 8132/8164/8132F/8164F/8024/8024F/M8024/M8024-k/ M6220/M6348/7024/7048/7024P/7048P/7024F/7048R/7048R-RA Release Notes VLAN ACL ACL prevented traffic from reaching Prevented VLAN ACL from All 5.0 supported blocks traffic destination platforms being applied to stack ports. across stack members All 5.0 supported Power supply Power Supply messages are only sent to the Elevated failure messages to platforms logging...
  • Page 26 All 4.2 supported "show spanning- The user may think that there is traffic over Corrected the counters. platforms tree detail" interfaces that are supposed to be inactive as counters are far as spanning tree is concerned. non-zero for inactive interfaces All 4.2 platforms that Unable to The user may not be able to remove the...
  • Page 27 PowerConnect 8132/8164/8132F/8164F/8024/8024F/M8024/M8024-k/ M6220/M6348/7024/7048/7024P/7048P/7024F/7048R/7048R-RA Release Notes All 4.2 supported Configuration Configuration command "logging Added checks to return error platforms command <hostname>" accepts more than 63 when hostname is larger than 63 characters. "logging characters, but saves only 63 characters in running-config. <hostname>"...
  • Page 28 All 4.2 supported startup-config startup-config failed error message is Corrected the implementation platforms failed error displayed when finishing the Dell Easy of this command so that it message is Setup Wizard functions correctly. displayed when finishing the Dell Easy Setup Wizard System Firmware Version 5.1.0.1...
  • Page 29 PowerConnect 8132/8164/8132F/8164F/8024/8024F/M8024/M8024-k/ M6220/M6348/7024/7048/7024P/7048P/7024F/7048R/7048R-RA Release Notes All 4.2 supported In stacking CLI output for command "show system Corrected pagination in the platforms environment, temperature" is corrupted when command handler. pagination is used. "show system temperature" command output is corrupted PC8024F Error message When a copper port was disabled, port was Corrected by disabling for port enable /...
  • Page 30 general mode The general mode for switchport won't Corrected memory vlan does not work properly in several cases, such as, initialization problem show up after a script apply, nsf failover and save and reload, it shows reload. up in access vlan SNMP OIDs Walk of any member of...
  • Page 31 PowerConnect 8132/8164/8132F/8164F/8024/8024F/M8024/M8024-k/ M6220/M6348/7024/7048/7024P/7048P/7024F/7048R/7048R-RA Release Notes Timeout during SNMP walk on root ends with timeout Corrected delay that caused All 4.2 supported SNMP walk on timeout. platforms root "show interfaces "show interfaces switchport" command Corrected the display of the All 4.2 supported switchport"...
  • Page 32 Switch doesn't Switch doesn't register all the 576 devices if Corrected the allocation of All 4.2 supported register all the LLDP-MED has all the optional LLDP- LLDP-MED Location TLVs. platforms 576 devices if MED Location TLVs. LLDP-MED has all the optional TLVs.
  • Page 33 PowerConnect 8132/8164/8132F/8164F/8024/8024F/M8024/M8024-k/ M6220/M6348/7024/7048/7024P/7048P/7024F/7048R/7048R-RA Release Notes "ip http secure- ip http secure-server command not getting Corrected command parsing All 4.2 supported server" applied when we migrate from 4.1.0.19 to problem. platforms command not 4.2.1.3 release getting migrated from 4.1.0.19 build to 4.2.1.3 build.
  • Page 34 CLI command CLI command "show dot1x users" is Corrected the command tree All 4.2 supported "show dot1x missing for the "show dot1x users" platforms users" is missing command. Missing port Changing VLAN configuration for general Corrected the issue. All 4.2 supported membership mode affected trunk mode configuration platforms...
  • Page 35 PowerConnect 8132/8164/8132F/8164F/8024/8024F/M8024/M8024-k/ M6220/M6348/7024/7048/7024P/7048P/7024F/7048R/7048R-RA Release Notes Dropped VLAN Customer is really not able to use this Corrected by not ignoring the All 4.2 supported frames are counter to monitor their network outage dropped VLAN frames in the platforms included in activity. Discards counter Discards counters.
  • Page 36 show crypto key After generating DSA & RSA keys, All 4.2 supported Resolved mypubkey executing the command "show crypto key platforms generates two mypubkey" generates the following error error messages messages: <187> APR 23 09:09:22 192.168.1.2-1 OSAPI[162603392]: osapi_file.c(657) 426 %% File close failed for descriptor 37 <187>...
  • Page 37 PowerConnect 8132/8164/8132F/8164F/8024/8024F/M8024/M8024-k/ M6220/M6348/7024/7048/7024P/7048P/7024F/7048R/7048R-RA Release Notes No message The switch does not log an error message All 4.2 supported A Log message "Unable to logged for "Max when the maximum number of SSH platforms find a free connection. number of SSH sessions has been exceeded.
  • Page 38 Line "no The following is displayed when startup- All 4.2 supported Corrected stored config passive-interface config is loaded: platforms Vl32" in startup- config does not Applying Global configuration, please wait get loaded on startup Applying Interface configuration, please wait ... ******* The following lines in "startup- config"...
  • Page 39 PowerConnect 8132/8164/8132F/8164F/8024/8024F/M8024/M8024-k/ M6220/M6348/7024/7048/7024P/7048P/7024F/7048R/7048R-RA Release Notes M8024 - 1GB The M8024 is negotiating 1GB speed PCM8024 Incorrect pre-emphasis values link being connection with the 10GB X520-KX4 Intel have been corrected. negotiated on card in the blade server. Issue is only 10GB Intel present with new X520-KX4 Feature request -...
  • Page 40 PC6220M GUI The issue using CLI stack ports shows up All 4.2 supported Web shows stack ports up if shows stack- and counters shows no transfer rate but GUI platforms they are up ports down but shows stack ports down. CLI does not.
  • Page 41 PowerConnect 8132/8164/8132F/8164F/8024/8024F/M8024/M8024-k/ M6220/M6348/7024/7048/7024P/7048P/7024F/7048R/7048R-RA Release Notes Auto-neg option Auto-neg is an option in the port All 4.2 supported Auto-negotiation selection is via Web UI is configuration via Web UI for 10Gb fiber platforms disabled for 10G ports in the not grayed out ports.
  • Page 42 The CLI When executing the command terminal All 4.2 supported Terminal length settings now command length <value>, the value is not updated platforms take effect immediately. terminal length after execution. is not setting terminal length value The Service tag When executing the “show system id” is not All 4.2 modular platforms.
  • Page 43 PowerConnect 8132/8164/8132F/8164F/8024/8024F/M8024/M8024-k/ M6220/M6348/7024/7048/7024P/7048P/7024F/7048R/7048R-RA Release Notes Summary User Impact Resolution Affected Platforms IP PIMSM BSR/RP Mapping When the RP or the BSR changes, the data Corrected RP join All Platforms is not robust traffic may get affected and in some case processing.
  • Page 44 Summary User Impact Resolution Affected Platforms "no enable authentication" "no enable authentication" does not Corrected error in All Platforms does not disable access to disable access to privileged EXEC over authentication processing. privileged EXEC over the the telnet line telnet line If LAG port is configured as general trunk dot1q_api.c error during MIB Corrected VLAN access...
  • Page 45 PowerConnect 8132/8164/8132F/8164F/8024/8024F/M8024/M8024-k/ M6220/M6348/7024/7048/7024P/7048P/7024F/7048R/7048R-RA Release Notes Summary User Impact Resolution Affected Platforms Need to change message on If a switch contains new DDR, Modified the downgrade PCM8024 console when try to downgrading to 4.1.0.19 is not allowed. message. PCM8024-k downgrade anything below (with new 4.1.0.19 release for new DDR DDR)
  • Page 46 Summary User Impact Resolution Affected Platforms PCM8024-k PFC sends packet after quanta This can cause FCOE failures when using Switch no longer sends extension received. PCM8024-k as a transit switch between packet after quanta some switches. extension received. CLI command "show ipv6 A large number of interfaces cause Fixed the pagination for the All Platforms...
  • Page 47 PowerConnect 8132/8164/8132F/8164F/8024/8024F/M8024/M8024-k/ M6220/M6348/7024/7048/7024P/7048P/7024F/7048R/7048R-RA Release Notes Summary User Impact Resolution Affected Platforms Correct password length All Platforms No password min length error If "no passwords min-length" Is set an range check. when using web GUI. error results if the password is less than 8 characters.
  • Page 48 Summary User Impact Resolution Affected Platforms PC M8024 switch reset out-of- Inability to access switches via OOB port. The out-of-band address is PCM8024 band address to none when maintained over switchport switchports were changed changes. Web page shows IP address as Potential operator confusion over switch The web page output has operations...
  • Page 49 PowerConnect 8132/8164/8132F/8164F/8024/8024F/M8024/M8024-k/ M6220/M6348/7024/7048/7024P/7048P/7024F/7048R/7048R-RA Release Notes Summary User Impact Resolution Affected Platforms DHCPv6 web issues Potential operator confusion regarding The acceptable character switch configuration. sets are documented in the Platforms CLI Reference guide. LLDP MED application should Potential operator confusion regarding Location and inventory not allow configuration of switch configuration.
  • Page 50 Summary User Impact Resolution Affected Platforms Traffic is forwarding when Incorrect operational state in network. ipv6 forwarding PCM8024 IPv6 forwarding is disabled command is deprecated. To disable traffic forwarding, use the “no ipv6 unicast-routing” in place of the “no ipv6 forwarding”...
  • Page 51 PowerConnect 8132/8164/8132F/8164F/8024/8024F/M8024/M8024-k/ M6220/M6348/7024/7048/7024P/7048P/7024F/7048R/7048R-RA Release Notes Summary User Impact Resolution Affected Platforms LLDP-Med TLV information Potential operator confusion over switch Jumbo LLDP frames are not registered for jumbo frame operations. now processed properly Platforms sizes greater than 8000 VLAN binding entries are not Potential operator confusion over switch VLAN binding entries are being displayed on Read-Only...
  • Page 52 New syntax has been added "Match every packet" option configuration. Possible security issue. to the management ACL to Platforms allow the any specification for the service type. SNMP support for Dell-LAN- Potential operator frustration over switch The Dell-LAN-TRAP-MIB TRAP-MIB configuration. is supported. Platforms...
  • Page 53 PowerConnect 8132/8164/8132F/8164F/8024/8024F/M8024/M8024-k/ M6220/M6348/7024/7048/7024P/7048P/7024F/7048R/7048R-RA Release Notes Summary User Impact Resolution Affected Platforms LACP not working with Juniper Potential operator frustration over switch The LACP process now EX-4200, show inactive port operations. Inability to interoperate with sends 128 byte LACP PDUs. Platforms channel state.

  • Page 54: C L I R E F E R E N C E G U I D E U P D A T E

    CLI Reference Guide Updates Release 5.1.0.1 The following table lists issues found in the CLI Reference Guide after publication: Command Issue ip igmp snooping querier The guideline under this command refers to the IGMP Snooping Max Response query-interval Time. A reference that this can be configured using command ip igmp query-max- response-time under IGMP commands is missing.
  • Page 55 The VLAN name command has been migrated to VLAN Config mode name "RDU-NOC and is no longer available in interface VLAN mode. Management VLAN" Release 4.2.0.4  Please refer Dell PowerConnect CLI Reference Guide for more details System Firmware Version 5.1.0.1 Page 53...
  • Page 56 Release 4.1.1.9  No Updates Release 4.1.0.19 The following commands are supported on switches that have combo ports: Command media-type Syntax: media-type { auto-select [rj45 | sfp ] | rj45 | sfp } auto-select rj45 - utilize RJ45 media when both media types are active auto-select sfp - utilize the SFP media when both media types are active auto-select –...
  • Page 57 Down Release 4.1.0.6 The Dell PowerConnect CLI Reference Guide is completely new. Users are referred to the Dell PowerConnect Configuration Migration White Paper for information on how to migrate configurations from previous releases of Dell PowerConnect firmware to the 4.0.0.6 Dell PowerConnect firmware.

  • Page 58: U S E R ' S C O N F I G U R A T I O N G U I D E U P D A T E

    User’s Configuration Guide Updates The following table lists issues found in the User’s Configuration Guide after publication: Release 5.1.0.1 Issue The following paragraphs need to be added to the User’s Guides for all platforms except the PCM6220: Unknown unicast and multicast packets are copied to the CPU on the lowest priority QoS queue. Unknown packets are those that do not have hardware forwarding entries.
  • Page 59 PowerConnect 8132/8164/8132F/8164F/8024/8024F/M8024/M8024-k/ M6220/M6348/7024/7048/7024P/7048P/7024F/7048R/7048R-RA Release Notes Release 4.2.2.3  No Updates Release 4.2.1.3  Please refer Dell PowerConnect Users Guide for more details Release 4.2.0.4  Please refer Dell PowerConnect Users Guide for more details Release 4.1.1.9  No Updates Release 4.1.0.19 The default authentication profile has changed from "enableList"...

  • Page 60: Known Issues

    Known Issues The following are all the outstanding known issues from previous releases. The issues listed here may have been discovered on any of the switches listed on the title page. Release 5.1.0.1 Summary User Impact Workaround Molex QSPF DAC Cable Voltage is displayed as 0.00 instead of "N/A"...
  • Page 61 PowerConnect 8132/8164/8132F/8164F/8024/8024F/M8024/M8024-k/ M6220/M6348/7024/7048/7024P/7048P/7024F/7048R/7048R-RA Release Notes Release 5.0.0.4 Summary User Impact Workaround QSFP Base CR4 with When using the DAC copper cables with QSFP None copper DAC cable CR4s (which are rarely used) and cable more lengths greater than 3 than 3 meters, the switch may not even detect meters will not work on this device and so link up never happens.
  • Page 62 Summary User Impact Workaround The following unwanted There is no effect to the switch or user, just None logs may come up on unwanted log messages on console. console after running the “show tech-support” command with UDLD and MSTP configured: “ATP RX: Failed to alloc”...
  • Page 63 PowerConnect 8132/8164/8132F/8164F/8024/8024F/M8024/M8024-k/ M6220/M6348/7024/7048/7024P/7048P/7024F/7048R/7048R-RA Release Notes Summary User Impact Workaround Port goes down if the If the port is operating in Trunk mode and UDLD Include the port in native vlan. port is excluded from is enabled, the port goes down if it is excluded native vlan with UDLD from the native vlan.
  • Page 64 Summary User Impact Workaround SNMP walk is not SNMP walk on the root port times out. Do not do SNMP walks using root port. successful while doing walk on root port. FIP sessions are getting Users are unlikely to change either the default Do not change the FIP VLAN while sessions disconnected for VLAN VLAN or the FIP VLAN while sessions are...
  • Page 65 None server community- group” is not available. group" doesn't work Dot1x ias local The internal database feature, which is a Dell Use any other form of dot1x authentication. authentication method specific feature, is not working correctly because not working this feature requires a user to authenticate using MD5, which is not supported by Windows at this time.
  • Page 66 IE 8. display (1) Status LED does not glow to identify Master (2) Member units do not show "DELL PowerConnect M8024-k" model info (3) Member units port display is missing (4) LED label should be "Unit No." instead of "Stack No."...
  • Page 67 PowerConnect 8132/8164/8132F/8164F/8024/8024F/M8024/M8024-k/ M6220/M6348/7024/7048/7024P/7048P/7024F/7048R/7048R-RA Release Notes Release 4.1.1.9 Summary User Impact Workaround LLPF is not supported The hardware functionality needed to support Upgrade to a PowerConnect switch that on the PCM6220 switch LLPF is not available on the PCM6220 switch. supports LLPF like a PCM6348 switch. Traffic led solid green Setting advertisement from other switches or IXIA None –...
  • Page 68 Summary User Impact Workaround ST : Stack member No user impact expected. Observed occasional None required. response times to ICMP outlier response time up to 500 ms for stack ping requests in a 12 unit members in a large stack configuration with stack are larger than for heavy traffic.

  • Page 69: K N O W N R E S T R I C T I O N S A N D L I M I T A T I O N

    PowerConnect 8132/8164/8132F/8164F/8024/8024F/M8024/M8024-k/ M6220/M6348/7024/7048/7024P/7048P/7024F/7048R/7048R-RA Release Notes Known Restrictions and Limitations Release 5.1.0.1 Description User Impact SNMP walk is not successful while doing walk on root port SNMP walk on root port may result in a timeout if executed without specifying any timeout value.

  • Page 70: Management – 4.2.1.3

    Release 5.0.0.4 System – 5.0.0.4 System Description User Impact 8100 switches increment “Internal MAC Rx Errors” counter, when packets are For typical IP networks this problem won't be seen because the length received with (size > 1518) and (size <= field/Ethertype will contain a valid value.

  • Page 71: Layer 2 – 4.2.0.4

    PowerConnect 8132/8164/8132F/8164F/8024/8024F/M8024/M8024-k/ M6220/M6348/7024/7048/7024P/7048P/7024F/7048R/7048R-RA Release Notes MjMO+BPP5KXzNWfZhqAhxBSoBvif/z6pzi9xWLlYy99A03zmRYCpcGIoLW iRHsR7NVpxFqwbqvez8KS0CDJ5aoKKLrpBlpg5ETkYEew/uTZ14lQQRBrzPw GBfxvTXKCWiI2j5KFa/WKLSnmWJX0/98qpxW/lMXoXsA9iK4pnMKwAAAI B4Jrt6jmoLybpzgOPOI0DsJ7jQwWacinD0jliz8k+qzCpanhd2wH+DEdj/xO2sFR fnYlME3hmXoB+7NByVUtheVjuQ2CWhcGFIKm9tbuPC6DtXh1xxT0NJ7rspv Lgb0s6y/0tk+94ZP5RCoAtLZ7wirShy3/KJ4RE0y2SFZjIVjQ==" console(config-pubkey-key)#exit console(config-pubkey-chain)#exit console(config)#exit console#show crypto key pubkey-chain ssh username asd Username : asd ssh-dss AAAAB3NzaC1kc3MAAACBAJRwUAD3AuRACp1MObBeh1AgyZb18wf9Bt dip+t+1CbAqiqNEh4lBiew184DSKk0T6SnSSXuCN+bJnQPxJeiQt+OFnmjiYhn HcvI04Q5KnQhloZcEFgSsmQ7zJnReWtLvUQI0QvBIStanzedmQVGHvDrQ5X 2R729ToSH0ibBrnYtAAAAFQDNord7S9EJvUkKKxVBpWE6/skCmQAAAIB MjMO+BPP5KXzNWfZhqAhxBSoBvif/z6pzi9xWLlYy99A03zmRYCpcGIoLW iRHsR7NVpxFqwbqvez8KS0CDJ5aoKKLrpBlpg5ETkYEew/uTZ14lQQRBrzPw GBfxvTXKCWiI2j5KFa/WKLSnmWJX0/98qpxW/lMXoXsA9iK4pnMKwAAAI B4Jrt6jmoLybpzgOPOI0DsJ7jQwWacinD0jliz8k+qzCpanhd2wH+DEdj/xO2sFR fnYlME3hmXoB+7NByVUtheVjuQ2CWhcGFIKm9tbuPC6DtXh1xxT0NJ7rspv Lgb0s6y/0tk+94ZP5RCoAtLZ7wirShy3/KJ4RE0y2SFZjIVjQ== Fingerprint : d9:d1:21:ad:26:41:ba:43:b1:dc:5c:6c:b9:57:07:6c SSH RSA or DSA keys can be generated by using the ssh-keygen command on a Unix system or with other publicly available utilities.

  • Page 72: Layer 3 – 4.2.0.4

    MAC Filtering Description User Impact Maximum number of unicast static The maximum number of unicast MAC and source port filtering entries is 20. filtering entries Maximum number of multicast static The maximum number of multicast MAC and source port filtering entries is 20. filtering entries The maximum number of multicast MAC and destination port filtering entries is 256.

  • Page 73: Management – 4.2.0.4

    PowerConnect 8132/8164/8132F/8164F/8024/8024F/M8024/M8024-k/ M6220/M6348/7024/7048/7024P/7048P/7024F/7048R/7048R-RA Release Notes system automatically adjust the IPv4/ IPv6 MTU based on the link MTU. VRRP Description User Impact The maximum number of VRRP Users can scale VRRP higher than previously. instances is 50. Management – 4.2.0.4 Description User Impact radius-server mode commands do not Low - None of the commands in radius-server mode support a "no"...

  • Page 74: Data Center – 4.2.0.4

    Data Center – 4.2.0.4 Interoperability Description User Impact Low – FIP sessions are established and are displayed in the show commands. VLAN request/Notification counters are not incremented for priority tagged FIP snooping VLAN request or VLAN response counters do not increment when packets CNA sends priority tagged frames (i.e.

This manual is also suitable for:

Powerconnect 8132Powerconnect 8164Powerconnect 8132fPowerconnect 8164fPowerconnect 7024Powerconnect 7024p ... Show all

Table of Contents