Table of Contents
Advertisement
Server
Option
System
Management
Console
Redirection
BMC LAN
Configuration
Event Log
Configuration
Assert NMI on
PERR
Assert NMI on
SERR
FRB-2 Policy
Boot Monitoring
Boot Monitoring
Policy
Thermal Sensor
BMC IRQ
Parameter
Description
–
System Management submenu is
displayed.
–
Console Redirection submenu is
displayed.
–
BMC LAN Configuration submenu is
displayed.
–
Event Log Configuration submenu is
displayed.
Disabled
Specify whether to support PCI PERR or
[Enabled]
not.
Disabled
Specify whether to support PCI SERR or
[Enabled]
not.
Disable FRB2
Set the FRB level 2 timer.
Timer
Disable BSP
Do Not Disable
BSP
[Retry 3 Times]
[Disabled]
Specify whether to enable or disable the
boot monitoring function on booting, or
5 Minutes
select the time limit for timeout.
10 minutes
To use this function, install NEC
15 minutes
ESMPRO Agent. Set this item to
20 minutes
"Disabled" if the system is booted from
25 minutes
OS without installation of NEC
30 minutes
ESMPRO Agent.
35 minutes
40 minutes
45 minutes
50 minutes
55 minutes
60 minutes
Specify the processing at the
[Retry 3 Times]
occurrence of timeout during boot
Always Reset
monitoring.
If [Retry 3 times] is selected, the system
is reset after the occurrence of timeout
and OS boot is retried up to three times.
If [Always Reset] is selected, the system
is reset after the occurrence of timeout
and OS boot is retried repeatedly.
* If no service partition exists in the
Disabled
Specify whether to enable or disable the
thermal sensor monitoring function. If a
[Enabled]
thermal error is detected with this item
being set to "Enabled", the system stops
at the end of POST.
Disabled
Determines routing of the BMC
interrupt.
[IRQ 11]
system, OS boot is retried repeatedly
from the system partition.
Configuring Your Server 4-15
Your Setting
Advertisement
Table of Contents
