Page 2
Aruba Networks, Inc. from any and all legal actions that might be taken against it with respect to infringement of copyright on behalf of those vendors. Dell PowerConnect W-Series Instant Access Point | MIB Reference Guide 0511034-01 | January 2012...
This manual is for network administrators and operators responsible for managing the Dell PowerConnect W-Series Instant Access Points. Contents This guide provides information about Dell PowerConnect Instant MIBs. Unless otherwise stated in the following table, each chapter provides information about the hierarchy, OIDs, and descriptions of the statistical information the MIBs provide.
Page 16
Intrusion Detection System IGMP Internet Group Management Protocol Internet Key Exchange Internet Protocol Initialization Vectors Kilobyte Local Area Network LDAP Lightweight Directory Access Protocol Listening Interval Media Access Control 16 | Preface Dell PowerConnect W-Series Instant Access Point | MIB Reference Guide...
Page 17
Service Set Identifier Traffic Indication Map Transport Layer Security Type of Service TSPEC Traffic Specification VLAN Virtual Local Area Network VoIP Voice over IP Virtual Private Network Dell PowerConnect W-Series Instant Access Point | MIB Reference Guide Preface | 17...
Identifiers (OIDs). The OIDs are designated by text strings and integer sequences. The hardware MIBs are assigned under the Dell organization code, while all others are under the Dell organization code. For example, Dell and 1.3.6.1.4.1.14823 both represent the private enterprise node Aruba, as...
Figure 1 illustrates the high-level hierarchy of the MIBs. This document only covers the enterprise MIBs, objects designed to specifically support Dell devices. Standard MIBs are not covered. Figure 1 High-Level MIB Hierarchy MIB is one of the elements of Simple Network Management Protocol (SNMP), which is used to manage network devices.
devices include workstations, routers, microwave radios, and other network components. Agents are embedded in the Dell PowerConnect W-Series Mobility Controllers firmware, unlike some devices such as servers that require the agent to be installed separately. MIBs are used for communication between the Managers and the Agents. The OIDs of the MIBs enable the ...
Files, above. It is assumed that the workstation is connected to the Dell Instant and that a MIB browser is available. For most applications, the root of the MIB must be included in the OID—the OID begins with a decimal point as shown below.
The contents of an example Instant enterprise MIB file, aruba-cts.my, are described below. Opening Line Following is the opening line, the beginning of the MIB file. AI-AP-MIB DEFINITIONS ::= BEGIN 24 | Using MIBs Dell PowerConnect W-Series Instant Access Point | MIB Reference Guide...
OBJECT-TYPE ,the OID is 1.3.6.1.4.1.14823.2.3.3.1.1.1.0. All MIBs and their related OIDs are listed in the snmp file of Instant. For more information, see “SNMP File” page 27. aiEnterpriseMibModules FROM ARUBA-MIB; Dell PowerConnect W-Series Instant Access Point | MIB Reference Guide Using MIBs | 25...
"This contains all access points connected to the virtual controler. This table is empty on AP where virtual controller is not active" ::= { aiStateGroup 1 } 26 | Using MIBs Dell PowerConnect W-Series Instant Access Point | MIB Reference Guide...
The SNMP file with all Dell MIBs is listed in Chapter 4, “SNMP MIBs Reference” on page All ArubaOS MIBs inherit their OIDs from the Dell MIB node. The following rows list the MIBs that precede CTS, starting from iso.
Page 28
28 | Using MIBs Dell PowerConnect W-Series Instant Access Point | MIB Reference Guide...
Chapter 3 Instant MIB The chapter provides information about the Dell Instant MIB, as well as entities that are attempting to access the network. Figure 4 shows the architecture of the Dell Instant MIB relative to 1.3.6.1.4.1.14823 (iso.org.dod.internet.private.enterprise.dell). The Instant MIB is listed in the file aruba-instant.my. For information about downloading Dell Instant MIB file, see “Downloading MIB Files”...
DisplayString (SIZE(0..64)) Max-Access read-only Status current Description Serial number of the Access Point. aiAPModel Syntax OBJECT IDENTIFIER Max-Access read-only Status current Description Access Point System OID. Dell PowerConnect W-Series Instant Access Point | MIB Reference Guide Instant MIB | 31...
Status current Description Amount of memory free in the access point in bytes. aiAPUptime Syntax TimeTicks Max-Access read-only Status current Description Uptime of the Access Point. 32 | Instant MIB Dell PowerConnect W-Series Instant Access Point | MIB Reference Guide...
Max-Access read-only Status current Description Radio channel of the Access Point. aiRadioTransmitPower Syntax Integer32 Max-Access read-only Status current Description Radio transmit power of the Access Point. 34 | Instant MIB Dell PowerConnect W-Series Instant Access Point | MIB Reference Guide...
Syntax Counter32 Max-Access read-only Status current Description Total number of frames transmitted. aiRadioTxMgmtFrames Syntax Counter32 Max-Access read-only Status current Description Total number of management frames transmitted. Dell PowerConnect W-Series Instant Access Point | MIB Reference Guide Instant MIB | 35...
Syntax Counter32 Max-Access read-only Status current Description Total number of received frames. aiRadioRxDataFrames Syntax Counter32 Max-Access read-only Status current Description Total number of received data frames. 36 | Instant MIB Dell PowerConnect W-Series Instant Access Point | MIB Reference Guide...
Total number of frames received in error. aiRadioPhyEvents Syntax Counter32 Max-Access read-only Status current Description Number of physical layer events that indicates frames not received because of interference. Dell PowerConnect W-Series Instant Access Point | MIB Reference Guide Instant MIB | 37...
Description Server entry. Index { authServerName } aiWlanAPMACAddress Syntax MacAddress Max-Access read-only Status current Description MAC Address of the Access Point where WLAN is active. 38 | Instant MIB Dell PowerConnect W-Series Instant Access Point | MIB Reference Guide...
Syntax Counter32 Max-Access read-only Status current Description Total number of frames transmitted. aiWlanTxDataFrames Syntax Counter32 Max-Access read-only Status current Description Total number of data frames transmitted. Dell PowerConnect W-Series Instant Access Point | MIB Reference Guide Instant MIB | 39...
Counter32 Max-Access read-only Status current Description Total number of received data frames. aiWlanRxDataBytes Syntax Counter32 Max-Access read-only Status current Description Total number of received data bytes. 40 | Instant MIB Dell PowerConnect W-Series Instant Access Point | MIB Reference Guide...
Entry Max-Access not-accessible Status current Description Server entry. Index { authServerName } aiClientMACAddress Syntax MacAddress Max-Access read-only Status current Description MAC Address of the client. Dell PowerConnect W-Series Instant Access Point | MIB Reference Guide Instant MIB | 41...
DisplayString Max-Access read-only Status current Description Name of the user using the client. aiClientOperatingSystem Syntax DisplayString Max-Access read-only Status current Description Operating system of the client. 42 | Instant MIB Dell PowerConnect W-Series Instant Access Point | MIB Reference Guide...
Description Total number of retry frames transmitted by the client. aiClientTxRate Syntax Counter32 Max-Access read-only Status current Description Transmission rate of the client in mbps. Dell PowerConnect W-Series Instant Access Point | MIB Reference Guide Instant MIB | 43...
Receiving rate of the client in mbps. aiClientUptime Syntax TimeTicks Max-Access read-only Status current Description Client uptime. On mobility event all counters are reset to 0 and uptime resets to 0. 44 | Instant MIB Dell PowerConnect W-Series Instant Access Point | MIB Reference Guide...
.1.3.6.1.4.1.674.10895.5013 Dell PowerConnect W-620 Controller .1.3.6.1.4.1.674.10895.5014 This section provides lists of the SNMP MIB OIDs that are related to Dell Instant. The following table defines the sysObjectIds for Dell PowerConnect W-Series Instant products. Table 11 SNMP OIDs returned as sysObjectID for Dell PowerConnect W-Series Instant Access products...
Page 46
Table 11 SNMP OIDs returned as sysObjectID for Dell PowerConnect W-Series Instant Access products (Continued) SNMP MIB Dell PowerConnect W-AP92 Access Point .1.3.6.1.4.1.674.10895.5006 Dell PowerConnect W-AP93 Access Point .1.3.6.1.4.1.674.10895.5007 Dell PowerConnect W-AP105 Access Point .1.3.6.1.4.1.674.10895.5008 Dell PowerConnect W-AP124 Access Point .1.3.6.1.4.1.674.10895.5009...
(PDU). Varbinds are defined in the Description section below. Figure 5 shows the architecture of the Traps MIB relative to 1.3.6.1.4.1.14823 (iso.org.dod.internet.private.enterprise.dell). The Traps are listed in the file aruba-trap.my MIB file. For information about downloading Dell MIB files, see “Downloading MIB Files” on page 23.
Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the BSSID of the access point for which we are raising the trap. Dell PowerConnect W-Series Instant Access Point | MIB Reference Guide Traps | 51...
Syntax MacAddress Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the MAC address of a node. 52 | Traps Dell PowerConnect W-Series Instant Access Point | MIB Reference Guide...
This object is used in the traps to indicate the signal-to-noise ratio. wlsxTrapSignatureName Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the signature name. Dell PowerConnect W-Series Instant Access Point | MIB Reference Guide Traps | 53...
This object is used in the traps to indicate the AP transmit power. wlsxTrapMatchedMac Syntax MacAddress Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the MAC address. 54 | Traps Dell PowerConnect W-Series Instant Access Point | MIB Reference Guide...
This object is used in the traps to indicate the admin status of VLAN. wlsxTrapAuthServerName Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the authentication server used for authentication. Dell PowerConnect W-Series Instant Access Point | MIB Reference Guide Traps | 55...
This object is used in the traps to indicate the fan number. wlsxTrapVoltageType Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the type of voltage. 56 | Traps Dell PowerConnect W-Series Instant Access Point | MIB Reference Guide...
This object is used in a trap to identify a new MAC address. wlsxTrapDBName Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object is used in a trap to identify the name of the database. Dell PowerConnect W-Series Instant Access Point | MIB Reference Guide Traps | 57...
Max-Access accessible-for-notify Status current Description This object contains the master IP address. wlsxTrapVrrpOperState Syntax ArubaVrrpState Max-Access accessible-for-notify Status current Description This object represents the VRRP operational state. 58 | Traps Dell PowerConnect W-Series Instant Access Point | MIB Reference Guide...
Status current Description This object represents the controller IP address. wlsxTrapSwitchRole Syntax ArubaSwitchRole Max-Access accessible-for-notify Status current Description This object represents the role of the controller. Dell PowerConnect W-Series Instant Access Point | MIB Reference Guide Traps | 59...
Status current Description This object represents the Authentication method of the user. wlsxTrapAPRadioNumber Syntax Integer32 Max-Access accessible-for-notify Status current Description This object represents the radio number. 60 | Traps Dell PowerConnect W-Series Instant Access Point | MIB Reference Guide...
IpAddress Max-Access accessible-for-notify Status current Description This object represents the trap host. wlsxTrapHostPort Syntax Integer32 Max-Access accessible-for-notify Status current Description This object represents the trap host port. Dell PowerConnect W-Series Instant Access Point | MIB Reference Guide Traps | 61...
Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This variable represents the AMAPI object which is the reason for the update failure. History Added in ArubaOS 3.1.0.0. 62 | Traps Dell PowerConnect W-Series Instant Access Point | MIB Reference Guide...
This object is used in the traps to indicate the confidence level as a percentage. wlsxTrapMissingLicenses Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This variable indicates any licenses that are not present during a configuration update. Dell PowerConnect W-Series Instant Access Point | MIB Reference Guide Traps | 63...
Max-Access accessible-for-notify Status current Description This object represents the tunnel down reason. wlsxTrapApSerialNumber Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object represents the AP serial number. 64 | Traps Dell PowerConnect W-Series Instant Access Point | MIB Reference Guide...
Description This object represents the local controller name. wlsxTrapPrimaryControllerIp Syntax IpAddress Max-Access accessible-for-notify Status current Description This object represents the IP address of the AP's primary controller. Dell PowerConnect W-Series Instant Access Point | MIB Reference Guide Traps | 65...
This object represents the MAC address of a device seen by an AP. wlsxTrapVcIpAddress Syntax IpAddress Max-Access accessible-for-notify Status current Description This object represents the Ip Address of a Voice client. 66 | Traps Dell PowerConnect W-Series Instant Access Point | MIB Reference Guide...
This object is used in the traps to indicate the Previous Secondary Channel. wlsxTrapAPPrevTxPower Syntax Integer32 Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate previous AP Transmit Power. Dell PowerConnect W-Series Instant Access Point | MIB Reference Guide Traps | 67...
This object is used in the traps to indicate the Current Secondary Channel. wlsxTrapUserAttributeChangeType Syntax INTEGER {create(1),delete(2),modify(3)} Max-Access accessible-for-notify Status current Description This object represents type of the configuration change. 68 | Traps Dell PowerConnect W-Series Instant Access Point | MIB Reference Guide...
This object is used in the traps to indicate the name of the crl. wlsxTrapCount Syntax Integer32 Max-Access accessible-for-notify Status current Description This object represents the number of occurrence of this trap. Dell PowerConnect W-Series Instant Access Point | MIB Reference Guide Traps | 69...
Status current Description This trap indicates that a user is Authenticated. wlsxNUserEntryDeAuthenticated Objects wlsxTrapTime, wlsxTrapUserIpAddress, wlsxTrapUserPhyAddress Status current Description This trap indicates that a user is Deauthenticated. Dell PowerConnect W-Series Instant Access Point | MIB Reference Guide Traps | 77...
A Trap which indicates that an access point down. wlsxNChannelChanged Objects wlsxTrapTime, wlsxTrapAPBSSID, wlsxTrapAPLocation, wlsxTrapAPChannel Status current Description This trap indicates that an access point at Location wlsxTrapAPLocation has changed the channel. 78 | Traps Dell PowerConnect W-Series Instant Access Point | MIB Reference Guide...
Objects { wlsxTrapTime, wlsxTrapNodeMac, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation } Status current Description This trap indicates that an AM detected Station Impersonation. Dell PowerConnect W-Series Instant Access Point | MIB Reference Guide Traps | 79...
SSID that is not valid. wlsxShortPreableMisconfiguration Objects { wlsxTrapTime, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel } Status current Description This trap indicates that an access point has bad Short preambleconfiguration. 80 | Traps Dell PowerConnect W-Series Instant Access Point | MIB Reference Guide...
} Status current Description This trap indicates that an AP detected that a valid access point is using a Weak WEP initialization vector. For more info check:http://www.wve.org/entries/show/WVE-2005-0021 Dell PowerConnect W-Series Instant Access Point | MIB Reference Guide Traps | 81...
{ wlsxTrapTime, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapNodeMac, wlsxTrapAPLocation,wlsxTrapAPChannel } Status current Description This trap indicates that the previously detected interference for a station is no longer present. 82 | Traps Dell PowerConnect W-Series Instant Access Point | MIB Reference Guide...
} Status current Description This trap indicates that an AP detected that a station has exceeded the configured upper threshold for Low speed rate. Dell PowerConnect W-Series Instant Access Point | MIB Reference Guide Traps | 83...
} Status current Description This trap indicates that an AP has detected that the configured upper threshold for Frame Receive Error Rate was exceeded on a channel. 84 | Traps Dell PowerConnect W-Series Instant Access Point | MIB Reference Guide...
} Status current Description This trap indicates that an AP detected frames transmitted or received by a node, which exceed the configured IDS rate threshold. Dell PowerConnect W-Series Instant Access Point | MIB Reference Guide Traps | 85...
} Status current Description The acceptable sequence number difference is an IDS configuration object. For more info check:http://www.wve.org/entries/show/WVE-2005-0061 http://www.wve.org/entries/show/WVE-2005-0019 http://www.wve.org/entries/show/WVE-2005-0008 http://www.wve.org/entries/show/WVE-2005-0045 http://www.wve.org/entries/show/WVE-2005-0046 http://www.wve.org/entries/show/WVE-2005-0047 http://www.wve.org/entries/show/WVE-2005-0048 86 | Traps Dell PowerConnect W-Series Instant Access Point | MIB Reference Guide...
This trap indicates that an AP detected an invalid MAC OUI in the BSSID of a frame. An invalid MAC OUI suggests that the frame may be spoofed. Dell PowerConnect W-Series Instant Access Point | MIB Reference Guide Traps | 87...
Objects { wlsxTrapTime, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapNodeMac } Status current Description This trap indicates that a previously detected rogue access point association is no longer present. 88 | Traps Dell PowerConnect W-Series Instant Access Point | MIB Reference Guide...
Beacon Interval Field in the Beacon frame. wlsxNAuthServerIsDown Objects { wlsxTrapTime, wlsxTrapAuthServerName } Status current Description This trap indicates that an authentication server is down. Dell PowerConnect W-Series Instant Access Point | MIB Reference Guide Traps | 89...
{ wlsxTrapTime, wlsxTrapSignatureName, wlsxTrapSourceMac, wlsxTrapSnr, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation } Status current Description This trap indicates that an AP detected a signature match for ASLEAP from a Station.For more info check:http://www.wve.org/entries/show/WVE-2005-0027 90 | Traps Dell PowerConnect W-Series Instant Access Point | MIB Reference Guide...
} Status current Description This trap indicates that an AP detected a signature match for Deauth-Broadcast from an access point.For more info check:http://www.wve.org/entries/show/WVE-2005-0019 http:// www.wve.org/entries/show/WVE-2005-0045 Dell PowerConnect W-Series Instant Access Point | MIB Reference Guide Traps | 91...
} Status current Description This trap indicates that an AM has detected an Ad hoc network that is bridging to a wired network 92 | Traps Dell PowerConnect W-Series Instant Access Point | MIB Reference Guide...
} Status current Description This trap indicates that an AP is detecting an access point with the HT 40MHz intolerance setting. For more info check:http://www.wve.org/entries/show/WVE-2008-0004 Dell PowerConnect W-Series Instant Access Point | MIB Reference Guide Traps | 93...
This trap indicates that the number of potential fake clients detected by an AP has exceeded the configured IDS threshold. This is the total number of fake clients observed across all bands. For more info check:http://www.wve.org/entries/show/WVE-2005-0056 94 | Traps Dell PowerConnect W-Series Instant Access Point | MIB Reference Guide...
This can be a sign that the BSSID is being spoofed in order to fool the client into thinking the AP is operating on another channel. Dell PowerConnect W-Series Instant Access Point | MIB Reference Guide Traps | 95...
Objects wlsxTrapTime, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapSourceMac, wlsxTrapReceiverMac, wlsxTrapTargetAPBSSID, wlsxTrapAPChannel, wlsxTrapSnr Status current Description This trap indicates that an AP detected a ChopChop attack. For more info check:http://www.wve.org/entries/show/WVE-2006-0038 96 | Traps Dell PowerConnect W-Series Instant Access Point | MIB Reference Guide...
Status current Description This trap indicates that an AP detected a malformed association request with a NULL SSID. For more info check:http://www.wve.org/entries/show/WVE-2008-0010 Dell PowerConnect W-Series Instant Access Point | MIB Reference Guide Traps | 97...
Description This trap indicates that an AP detected an authentication frame with either a bad algorithm (similar to Fata-Jack) or a bad transaction. For more info check:http://www.wve.org/entries/show/WVE-2006-0057 98 | Traps Dell PowerConnect W-Series Instant Access Point | MIB Reference Guide...
This trap indicates that an access point has been classified as Interfering by the system. The access point is declared Interfering because it is not authorized, nor has it been classified as a Rogue. Dell PowerConnect W-Series Instant Access Point | MIB Reference Guide Traps | 99...
Objects wlsxTrapTime, wlsxTrapTargetAPBSSID, wlsxTrapTransmitterMac, wlsxTrapReceiverMac, wlsxTrapSignatureName, wlsxTrapSnr, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel Status current Description This trap indicates that an AP detected a signature match in a frame. 100 | Traps Dell PowerConnect W-Series Instant Access Point | MIB Reference Guide...
Max-Access Status current Description This trap indicates that an AP detected a signature match for Deauth-Broadcast in a frame. For more info check:http://www.wve.org/entries/show/WVE-2005-0019 http://www.wve.org/entries/show/WVE-2005-0045 Dell PowerConnect W-Series Instant Access Point | MIB Reference Guide Traps | 101...
Status current Description This trap indicates that an AP has attempted to contain an access point by disrupting traffic to its client on the wired interface. 102 | Traps Dell PowerConnect W-Series Instant Access Point | MIB Reference Guide...
Objects wlsxTrapTime, wlsxTrapAPChannel, wlsxTrapAPChannelSec, wlsxTrapAPPrevChannel, wlsxTrapAPPrevChannelSec, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPARMChangeReason Status current Description This trap indicates that an AP changed its channel. Dell PowerConnect W-Series Instant Access Point | MIB Reference Guide Traps | 103...
Status current Description This trap indicates that an AP detected an ad hoc network node using a valid/protected SSID. For more info check:http://www.wve.org/entries/show/WVE-2005-0008 104 | Traps Dell PowerConnect W-Series Instant Access Point | MIB Reference Guide...
Objects wlsxTrapTime, wlsxTrapUserName, wlsxTrapUserIpAddress, wlsxTrapAuthServerName Status current Description This trap indicates that a management user authentication has failed. Dell PowerConnect W-Series Instant Access Point | MIB Reference Guide Traps | 105...