Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Cisco 6030
Summary of Contents for Cisco 6030
- Page 1 Cisco Video Surveillance 6030 IP Camera Installation Guide Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 527-0883 Text Part Number: OL-28492-02...
- Page 2 OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Cisco and the Cisco Logo are trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and other countries. A listing of Cisco's trademarks can be found at www.cisco.com/go/trademarks.
-
Page 3: Table Of Contents
IP Camera Window Links IP Camera Windows Adjusting the IP Camera Focus and Zoom Powering the IP Camera On or Off Resetting the IP Camera Viewing Live Video N D E X Cisco Video Surveillance 6030 IP Camera Installation Guide OL-28492-02... - Page 4 Contents Cisco Video Surveillance 6030 IP Camera Installation Guide OL-28492-02...
- Page 5 Obtaining Documentation, Obtaining Support, and Security Guidelines For information about obtaining documentation, submitting a service request, and gathering additional information, see the monthly What’s New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at: http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html Subscribe to the What’s New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed...
- Page 6 Preface Cisco Video Surveillance 6030 IP Camera Installation Guide OL-28492-02...
-
Page 7: Introduction
• Introduction The Cisco Video Surveillance 6030 IP camera is an outdoor, high definition, professional fixed dome IP camera with industry-leading image quality and processing power. The 2.1 megapixel (MP) IP camera offers 1080p full HD resolution (1920 x 1080) with superb image quality up to 30 frames per second (FPS) while optimizing network usage with either H.264 or MJPEG compression. - Page 8 Chapter 1 Overview Package Contents Package Contents The Cisco Video Surveillance IP Camera package includes the following items: Cisco Video Surveillance 6030 IP Camera (1) • Installation template and alignment sticker (1) • Mounting plate (1) • Black cover (1) •...
-
Page 9: Cisco Video Surveillance 6030 Ip
Overview IP Camera Physical Details IP Camera Physical Details Figure 1-1 and the table that follows describe the physical features of the 6030 IP camera. Figure 1-1 IP Camera Physical Features Light sensor Senses the level of ambient light to determine when to switch day/night mode. - Page 10 10/100BaseT router or switch. 11 General Purpose I/O Terminal General purpose input/output (GPIO) terminal block that is Block used to connect external input and output devices. For more information, see Figure 1-2. Cisco Video Surveillance 6030 IP Camera Installation Guide OL-28492-02...
-
Page 11: General Purpose I/O Terminal Block
GPIO terminal block pin locations and descriptions. Figure 1-2 GPIO Terminal Block Pin Locations and Descriptions Description 12 VDC- 12 VDC+ 24 VAC 24 VAC The maximum output load from pins 7 and 8 is 400mA. Note Cisco Video Surveillance 6030 IP Camera Installation Guide OL-28492-02... - Page 12 Chapter 1 Overview General Purpose I/O Terminal Block Cisco Video Surveillance 6030 IP Camera Installation Guide OL-28492-02...
-
Page 13: Camera Installation
C H A P T E R Camera Installation This chapter provides information and instructions for installing the Cisco Video Surveillance 6030 IP Camera, and includes the following topics: Installation Guidelines, page 2-1 • Warnings Before Installation, page 2-1 •... - Page 14 Do not place the IP Camera on unsteady • Do not touch the IP Camera during a surfaces. lightning storm. • Do not disassemble the IP Camera. • Do not drop the IP Camera. Cisco Video Surveillance 6030 IP Camera Installation Guide OL-28492-02...
-
Page 15: Chapter 2 Camera Installation
IEC60950 compliant limited power source. Statement 353 Caution Inline power circuits provide current through the communication cable. Use the Cisco provided cable or a minimum 24AWG communication cable. The power adapter that you use with the IP camera must provide power that is within +/–10% of the Note required power. -
Page 16: Wall
Perform the following steps to install and connect an RJ45 Ethernet cable (24AWG [0.51 mm] gauge Step 5 recommended). Drill a hole on the rubber seal plug and insert an Ethernet cable (without a connector) through the opening. Cisco Video Surveillance 6030 IP Camera Installation Guide OL-28492-02... - Page 17 Press the Ethernet cable into the routing path at the bottom of the camera so that the cable will not get in the way when the metal mounting plate is attached. Cisco Video Surveillance 6030 IP Camera Installation Guide OL-28492-02...
-
Page 18: Installing The Ip Camera With A Vandal Resistant Enclosure
Push the seal (D) into the housing (B). Insert the seals (C) into unused holes on the seal (D) to avoid moisture. Secure the sealing nut (A) tightly and hex nut (F) from the bottom of the camera. Cisco Video Surveillance 6030 IP Camera Installation Guide OL-28492-02... - Page 19 • The secondary video stream must is enabled. • We recommend that you disable analog video after installation. To disable analog video, see the Cisco Note Video Surveillance 6000 Series IP Camera Configuration Guide. Cisco Video Surveillance 6030 IP Camera Installation Guide...
-
Page 20: Silica
IP camera field of view. Install the black cover. Step 12 Attach the dome cover to the camera by aligning it with the mounting holes. Step 13 Cisco Video Surveillance 6030 IP Camera Installation Guide OL-28492-02... - Page 21 After completing the initial setup, use the IP camera user interface to adjust the focal length and • zoom factor. For more information, see the “Adjusting the IP Camera Focus and Zoom” section on page 4-3. Cisco Video Surveillance 6030 IP Camera Installation Guide OL-28492-02...
- Page 22 Chapter 2 Camera Installation Installing the IP Camera with a Vandal Resistant Enclosure Cisco Video Surveillance 6030 IP Camera Installation Guide 2-10 OL-28492-02...
- Page 23 To connect to the IP camera for the first time and make initial configuration settings, perform the following steps. You can change these configuration settings in the future as described in the Cisco Video Surveillance 6000 Series IP Camera Configuration Guide.
-
Page 24: Chapter 3 Performing The Initial Setup Of The Ip Camera
If you are prompted to install ActiveX controls, which are required to view video from the IP camera, Step 8 follow the on-screen prompts to do so. The Home window appears. Cisco Video Surveillance 6030 IP Camera Installation Guide OL-28492-02... -
Page 25: Understanding The Ip Camera User Interface
C H A P T E R Camera Management This chapter provides information and instructions for managing the Cisco Video Surveillance 2620 IP Camera, and includes the following topics: Understanding the IP Camera User Interface, page 4-1 • Adjusting the IP Camera Focus and Zoom, page 4-3 •... -
Page 26: Chapter 4 Camera Management
Method by which the IP camera obtains its IP address. LAN IP IP address of the LAN to which the IP camera is connected. Subnet Mask Subnet mask of the LAN to which the IP camera is connected. Cisco Video Surveillance 6030 IP Camera Installation Guide OL-28492-02... -
Page 27: Adjusting The Ip Camera Focus And Zoom
While watching the video pane, perform the following steps: Move the Zoom slider until you achieve the desired zoom level. Move the Focus slider until the video image is at its sharpest. Cisco Video Surveillance 6030 IP Camera Installation Guide OL-28492-02... -
Page 28: Powering The Ip Camera On Or Off
There are various reset types, as described in Table 4-3. You also can also perform these reset operations from the Maintenance Settings window as described in the Cisco Video Surveillance 6000 Series IP Camera Configuration Guide. Table 4-3 Resetting the IP Camera Reset Type... -
Page 29: Viewing Live Video
Viewing Live Video Viewing Live Video After you install and set up the Cisco Video Surveillance IP Camera, you can connect to the IP camera through Internet Explorer and access the Camera Video & Control window to view live video. - Page 30 Flip button Rotates the video image by 180 degrees. Mirror button Reverses the video image. Cisco Video Surveillance 6030 IP Camera Installation Guide OL-28492-02...
- Page 31 50, click Restore. These configuration settings affect the cell that you select. If the cell is part of a group of horizontally or vertically (but not diagonally) adjacent cells, the settings affect all cells in the group. Cisco Video Surveillance 6030 IP Camera Installation Guide OL-28492-02...
- Page 32 Save Settings button Save the current motion detection configuration. Focus/Zoom The Focus/Zoom feature is available only on the Cisco Video Surveillance 6020, 6030, and Note 6400 IP cameras. Up Arrow toggle Click the Up Arrow to display the focus/zoom controls. The button changes to button the Down Arrow button.
- Page 33 DHCP, obtaining IP address through connecting to for the first time installation GPIO terminal block mounting to ceiling or wall factory reset warnings focus/zoom waterproof connector accessing controls logging out of controls panning Cisco Video Surveillance 6030 IP Camera Installation Guide IN-1 OL-28492-02...
- Page 34 IP camera controls in Camera Video/Control window powering on the IP camera video resolution Power over Ethernet (PoE) controls in Camera Video/Control window Power over Ethernet (PoE) View Video link Cisco Video Surveillance 6030 IP Camera Installation Guide IN-2 OL-28492-02...
- Page 35 Index warnings before installation waterproof connector zoom accessing controls zoom controls Cisco Video Surveillance 6030 IP Camera Installation Guide IN-3 OL-28492-02...
- Page 36 Index Cisco Video Surveillance 6030 IP Camera Installation Guide IN-4 OL-28492-02...