Server Configuration; Storage Blade; O Expansion Card; Network Interface Controller - NEC Express5800 System Configuration Manual
Hide thumbs
Also See for Express5800:
- User manual (574 pages) ,
- Maintenance manual (238 pages) ,
- Installation manual (75 pages)
Table of Contents
Advertisement
SYSTEM CONFIGURATION GUIDE
Server Configuration
1 Storage Blade
Product Name / Description
NEC Express5800/AT101b
LTO5 Drive, Two mezzanine PCI Slots, Two 1000BASE
2 I/O Expansion Card
2.1
Network Interface Controller
Category
Adapter
Type I
Adapter
Type II
NOTE:
The NIC cards which can be installed on a tape blade are the NIC cards which are supported on the
server blade attached. For the NIC cards supported, see the system configuration guide for server
blade.
NIC Teaming / Bonding feature
When using NIC teaming, please note the following:
Any of the network teaming must be processed in a single LAN controller.
Teaming feature is not supported on iSCSI interfaces.
To configure NIC bonding on Red Hat Enterprise Linux, see the configuration guide for the server
blade attached.
2.2
External Storage Controller
2.2.1
Fibre Channel Controller
Category
Adapter
Type I
NOTE:
Link speed of two ports in one cards should be used with the same link speed.
NEC Corporation
–
NEC Express5800/AT101b
Product Name / Description
GbE
1000BASE (2ch) Adapter
Intel® 82571EB Gigabit Ethernet Adapter
Dual Port 1000BASE Adapter
Intel® Ethernet Controller I350-AM2
GbE
1000BASE-T(4ch) Adapter
Intel® 82571EB Gigabit Ethernet Adapter
Quad Port 1000BASE Adapter
Intel® Ethernet Controller I350-AM4
Product Name / Description
Fibre Channel Controller(8Gbps/2ch)
Emulex LightPulse LPe1205-N Host Bus Adapter
Revision 1.1 – January 16, 2013
Part Number
N8404-005F
Part Number
N8403-021
N8403-076F
N8403-022
N8403-077F
Part Number
N8403-034
6
Advertisement
Table of Contents
