Table of Contents
Advertisement
23" LCD Color Monitor
10.White balance, Luminance adjustment
Approximately 2 Hours should be allowed for warm up before proceeding White-Balance
adjustment.
Before started adjust white balance, please setting the Chroma-7120 MEM. Channel 3 to 6500
0
Channel 4 to 9300
K colors, MEM. Channel 9 to 5700
2
180 cd/m
, 6500 parameter is x =313±28, y=329±28, Ymin = 200 cd/m
344 ±28, Ymin = 200 cd/m
How to setting MEM.channel you can reference to chroma 7120 user guide or simple use " SC" key and " NEXT"
key to modify x, y, Y value and use "ID" key to modify the TEXT description Following is the procedure to do
white-balance adjust
Enter into the factory mode:
Press MENU and + button during press Power button will activate the factory mode,
Gain adjustment:
Move cursor to "-Factory Setting-" and press MENU key to enter this sub-menu.
Move cursor to " Factory" and press MENU key.
Move cursor to " Auto Level" and press MENU key to adjust Gain and Offset automatically;
a. Adjust sRGB (6500
1. Switch the chroma-7120 to RGB-mode (with press "MODE" button)
2. Switch the MEM.channel to Channel 3 (with up or down arrow on chroma 7120)
3.The LCD-indicator on chroma 7120 will show x = 313 ±28, y = 329 ±28, Ymin =200cd/m
4. Adjust the RED on OSD window until chroma 7120 indicator reached the value R=100
5. Adjust the GREEN on OSD, until chroma 7120 indicator reached G=100
6. Adjust the BLUE on OSD, until chroma 7120 indicator reached B=100
7. Repeat above procedure (item 5,6,7) until chroma 7120 RGB value meet the tolerance =100±2
b. Adjust Color1 (9300
8. Switch the chroma-7120 to RGB-mode (with press "MODE" button)
9. Switch the MEM.channel to Channel 4 (with up or down arrow on chroma 7120)
10. The LCD-indicator on chroma 7120 will show x = 283 ±28, y = 297 ±28, Ymin= 180 cd/m
11. Adjust the RED on OSD window until chroma 7120 indicator reached the value R=100
12. Adjust the GREEN on OSD, until chroma 7120 indicator reached G=100
13. Adjust the BLUE on OSD, until chroma 7120 indicator reached B=100
14. Repeat above procedure (item 5,6,7) until chroma 7120 RGB value meet the tolerance =100±2
c. Adjust Color2 (5700
15. Switch the chroma-7120 to RGB-mode (with press "MODE" button)
16. Switch the MEM.channel to Channel 9 (with up or down arrow on chroma 7120)
17. The LCD-indicator on chroma 7120 will show x = 328 ±28, y = 344 ±28, Ymin = 200 cd/m
18. Adjust the RED on OSD window until chroma 7120 indicator reached the value R=100
2
)
0
K) color-temperature
0
K) color-temperature
0
K) color-temperature
0
K (our 9300 parameter is x=283±28, y=297±28, Ymin =
2
, and 5700 parameter is x = 328 ±28, y =
59
Dell SP2309Wc
0
K colors, MEM.
2
2
2
Hide quick links:
Advertisement
Table of Contents
