hit counter script
NEC Express5800/T110g-E System Configuration Manual
NEC Express5800/T110g-E System Configuration Manual

NEC Express5800/T110g-E System Configuration Manual

Tower server
Hide thumbs Also See for Express5800/T110g-E:

Advertisement

Quick Links

NEC Express5800/T110g-E
System Configuration Guide
Introduction
This document contains product and configuration information that will enable you to configure your system. The
guide will ensure fast and proper configuration of your NEC Express5800 server.
April 17, 2015
Revision 5.0
NEC Corporation

Advertisement

Table of Contents
loading

Summary of Contents for NEC Express5800/T110g-E

  • Page 1 NEC Express5800/T110g-E System Configuration Guide Introduction This document contains product and configuration information that will enable you to configure your system. The guide will ensure fast and proper configuration of your NEC Express5800 server. April 17, 2015 Revision 5.0 NEC Corporation...
  • Page 2: Table Of Contents

    – SYSTEM CONFIGRATION GUIDE NEC Express5800/T110g-E Contents TECHNICAL SPECIFICATION ..................3 Key Features ............................3 Specification ............................3 EXTERNAL VIEWS ......................7 Front View .............................. 7 Rear Views ............................. 8 Dimensions (mm) ..........................9 CONFIGURATION DIAGRAM ..................10 Expansion Slots ..........................10 SERVER CONFIGURATION ..................
  • Page 3: Technical Specification

    – SYSTEM CONFIGRATION GUIDE NEC Express5800/T110g-E Technical Specification Key Features  High performance with the latest Intel® Xeon® processor E3-1200 v3 processor family  Up to 32 GB of high speed DDR3-1600 memory  Full manageability by integrated EXPRESSSCOPE Engine 3 ...
  • Page 4 Noise emission was measured in accordance with ISO 7779. The actual value may vary by the operating environment. For Linux support, contact your sales representative or go to the NEC website at: http://www.nec.com/global/prod/express/linux/index.html VMware ESXi is supported only on Core and Xeon processor systems.
  • Page 5 – SYSTEM CONFIGRATION GUIDE NEC Express5800/T110g-E Model T110g-E Chipset Intel® C224 Chipset Memory Type DDR3-1600 ECC Unbuffered DIMM Standard Capacity 0 GB Maximum Capacity 32 GB (4 x 8 GB) Internal Storage Standard Capacity 0 GB Maximum Capacity 16 TB (4 x 4 TB)
  • Page 6 Maximum resolution available via EXPRESSSCOPE Engine 3 remote console is 1280 x 1024 / 65K colors. Noise emission was measured in accordance with ISO 7779. The actual value may vary by the operating environment. For Linux support, contact your sales representative or go to the NEC website at: http://www.nec.com/global/prod/express/linux/index.html Revision 5.0 – April 17, 2015...
  • Page 7: External Views

    – SYSTEM CONFIGRATION GUIDE NEC Express5800/T110g-E External Views Front View With Front bezel Hot Plug 2.5-inch Drive Configuration Hot Plug 3.5-inch Drive Configuration Non-hot Plug 3.5-inch Drive Configuration Legend Power Button Drive Bay Cover Key Power LED Drive Bay Cover Hard Drive Activity LED 5.25-inch Media Bay 2...
  • Page 8: Rear Views

    – SYSTEM CONFIGRATION GUIDE NEC Express5800/T110g-E Rear Views Hot Plug Power Supply Configuration Non-hot Plug Power Supply Configuration Legend Serial Port (A) Connector USB 3.0 Connectors VGA Connector Management LAN Connector BMC Reset Switch LAN Connectors Dump (NMI) Switch PCI Slots (Full Height) USB 2.0 Connectors...
  • Page 9: Dimensions (Mm)

    – SYSTEM CONFIGRATION GUIDE NEC Express5800/T110g-E Dimensions (mm) Standard Bezel Non-redundant Power Configuration Redundant Power Configuration Revision 5.0 – April 17, 2015 NEC Corporation...
  • Page 10: Configuration Diagram

    – SYSTEM CONFIGRATION GUIDE NEC Express5800/T110g-E Configuration Diagram Legend: Standard components Mandatory components Expansion Slots Slot #1 Slot #2 Slot #3 Slot #4 Legend PCIe 2.0 x1, x8 connector, Full Height, up to 168mm length PCIe 2.0 x1, x8 connector, Full Height, up to 168mm length PCIe 3.0 x16, x16 connector, Full Height, up to 312mm length...
  • Page 11: Server Configuration

    – SYSTEM CONFIGRATION GUIDE NEC Express5800/T110g-E Server Configuration 1 Base Models Product Name / Description Part Number NEC Express5800/T110g-E N8100-2189F no CPU, no RAM, no Drive Cage, no HDD, no Optiocal Drive Including: 400 Watt non-hot plug power supply, EXPRESSBUILDER DVD, Keyboard, Mouse...
  • Page 12: Maximum Available Memory

    – SYSTEM CONFIGRATION GUIDE NEC Express5800/T110g-E speed by dual-channel symmetric configuration.  Actual memory speed drops to 1333 MHz when you choose Pentium Processor or Celeron Processor. The memory requirement for installing VMware ESXi™ are below:  - VMware ESXi 5.1 : at least 3 GB - VMware ESXi 5.5 : at least 5 GB...
  • Page 13: Internal Hard Disk Drives

    – SYSTEM CONFIGRATION GUIDE NEC Express5800/T110g-E 4 Internal Hard Disk Drives RAID Configuration Refer to the section in accordance with your disk form factor and RAID configuration 4.1.1 2.5-inch Drive Available Interface SATA Non-RAID Refer to 4.2.1 Embedded SATA SATA Refer to 4.2.2...
  • Page 14: Inch Drive Configuration

    – SYSTEM CONFIGRATION GUIDE NEC Express5800/T110g-E NOTE:  Hot plug insertion/removal is not supported with the embedded SATA non-RAID controller.  Embedded SATA RAID controller is supported only on limited OS. For more details, please see OS Support Matrix for PCI Cards and Embedded Controllers.
  • Page 15: Embedded Sata Raid Controller

    – SYSTEM CONFIGRATION GUIDE NEC Express5800/T110g-E 4.2.2 Embedded SATA RAID Controller Category Product Name / Description Part Number Storage Controller Embedded SATA Controller (Standard) 4x 6Gb/s SATA, RAID0/1/10 capable Cable Internal SATA Cable (Standard) miniSAS to miniSAS Drive Cage 2.5-inch Drive Cage...
  • Page 16 – SYSTEM CONFIGRATION GUIDE NEC Express5800/T110g-E NOTE:  All drives within a RAID array should be of the same type, capacity and rotation speed.. 4.2.4 RAID 0/1 Controller with 512 MB Cache Category Product Name / Description Part Number Storage Controller...
  • Page 17 – SYSTEM CONFIGRATION GUIDE NEC Express5800/T110g-E 4.2.5 RAID 5/6 Controller with 512 MB Cache Category Product Name / Description Part Number Storage Controller RAID Controller (512MB, RAID 0/1/5/6) N8103-173 Required LSI MegaRAID SAS 9272-8i RAID0/1/5/6/10/50/60, 512 MB, Int. 8, PCIe 3.0(x8), SAS 6Gb/s,...
  • Page 18 – SYSTEM CONFIGRATION GUIDE NEC Express5800/T110g-E SSD Caching MegaRAID CacheCade N8103-156 Recommended for LSI MegaRAID SAS NOTE: - SSD used for cache is required - The SSD capacity which can be used as read cache is up to 512 GB.
  • Page 19: Hot Plug 3.5-Inch Drive Configuration

    – SYSTEM CONFIGRATION GUIDE NEC Express5800/T110g-E Cable Internal SAS/SATA Cable (Standard) Mini-SAS to mini-SAS Internal SAS/SATA Cable K410-294(00) Mini-SAS to mini-SAS, for 5th - 8th hard drives RAID Controller RAID Controller Instllation Kit K410-328(00) Installation Kit For LSI MegaRAID SAS 9270CV-8i...
  • Page 20 – SYSTEM CONFIGRATION GUIDE NEC Express5800/T110g-E 2TB 7.2K Hot Plug 3.5-inch SATA HDD N8150-457 1 x 2 TB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm NOTE  Hot plug insertion/removal is not supported with the embedded SATA non-RAID controller. 4.3.2 Embedded SATA RAID Controller...
  • Page 21 – SYSTEM CONFIGRATION GUIDE NEC Express5800/T110g-E 4.3.4 RAID 0/1 Controller with 512 MB Cache Category Product Name / Description Part Number Storage Controller RAID Controller (512MB, RAID 0/1) N8103-172 Required LSI MegaRAID SAS 9272-8i RAID0/1/10, 512 MB, Int. 8, PCIe 3.0(x8), SAS 6Gb/s, SATA...
  • Page 22 – SYSTEM CONFIGRATION GUIDE NEC Express5800/T110g-E 4.3.6 RAID 5/6 Controller with 1GB Cache/Battery Category Product Name / Description Part Number Storage Controller RAID Controller (1GB, RAID 0/1/5/6) N8103-174 Required LSI MegaRAID SAS 9272-8i RAID0/1/5/6/10/50/60, 1 GB, Int. 8, PCIe 3.0(x8), SAS 6Gb/s,...
  • Page 23: Non-Hot Plug 3.5-Inch Drive Configuration

    – SYSTEM CONFIGRATION GUIDE NEC Express5800/T110g-E Non-hot plug 3.5-inch Drive Configuration 4.4.1 Embedded SATA non-RAID Controller Category Product Name / Description Part Number Storage Controller Embedded SATA Controller (Standard) 4x 6Gb/s SATA Cable Internal SAS/SATA Cable (Standard) miniSAS to 4x SingleSATA Drive Cage 3.5-inch Drive Cage...
  • Page 24 – SYSTEM CONFIGRATION GUIDE NEC Express5800/T110g-E Drive Cage 3.5-inch Drive Cage N8154-53F Required 4 x 3.5-inch non-hot plug drive bays Drive 500GB 7.2K non-Hot Plug 3.5-inch SATA HDD N8150-460 4 slots available 1 x 500 GB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm 1TB 7.2K non-Hot Plug 3.5-inch SATA HDD...
  • Page 25: Internal Optical Drive

    – SYSTEM CONFIGRATION GUIDE NEC Express5800/T110g-E 1TB 7.2K non-Hot Plug 3.5-inch SATA HDD N8150-461 1 x 1 TB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm 2TB 7.2K non-Hot Plug 3.5-inch SATA HDD N8150-462 1 x 2 TB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm 3TB 7.2K non-Hot Plug 3.5-inch SATA HDD...
  • Page 26: Internal Rdx / Lto Drives

    – SYSTEM CONFIGRATION GUIDE NEC Express5800/T110g-E 6 Internal RDX / LTO Drives RDX/LTO Drive Selection Refer to the section in accordance with your type of tape drives:  RDX: Refer to 6.2.1  LTO: Refer to 6.2.2 NOTE:  Tape devices cannot be directly connected to VMware ESXi servers. For an ESXi environment, it is recommended to connect and configure an additional backup server via network.
  • Page 27: Pci Card

    – SYSTEM CONFIGRATION GUIDE NEC Express5800/T110g-E 7 PCI Card Please refer to Supported PCI cards and Installable Slots with regard to the position of PCI slot which can mount PCI card supported. Network Interface Controller Category Product Name / Description...
  • Page 28: Sas Controller

    – SYSTEM CONFIGRATION GUIDE NEC Express5800/T110g-E Using iSCSI See the table below for supported network interfaces and OS combinations. Category Network Interface Operating Systems 1GbE Embedded 1GbE NIC Windows Server 2008 R2, Windows Serer 2012, Windows Server 2012 R2; Red Hat Enterprise Linux 5, Red Hat Enterprise Linux 6, VMware...
  • Page 29: Internal Flash Memory

    - The following operations can be performed with the flash memory: - Installation of Windows server with express setup - Installation of Starter Pack—the package of NEC qualified drivers and system setting tools - Installation of NEC ESMPRO Agent and Universal RAID Utility...
  • Page 30: Add-On Components

    – SYSTEM CONFIGRATION GUIDE NEC Express5800/T110g-E 9 Add-on Components Server Management License The server integrates the EXPRESSSCOPE Engine 3 as standard. Refer to Server Management for the standard management features. For more extensive remote KVM and remote media features, choose the following kit.
  • Page 31: References

    CLP (Command Line Protocol) (DMTF compliant)   Remote control via Web browser (multi user login at the same time)   Scheduling (without UPS, require NEC ESMPRO Manager)   Maintenance EXPRESSSCOPE® Profile key (Backup/restore BIOS/BMC setup information) ...
  • Page 32: Os Support Matrix For Pci Cards And Embedded Controllers

    – SYSTEM CONFIGRATION GUIDE NEC Express5800/T110g-E OS Support Matrix for PCI Cards and Embedded Controllers Part Number Product Name  Embedded SATA non-RAID Controller  Embedded SATA RAID Controller  Embedded 1GbE NIC          - ...
  • Page 33: Copyright Notice And Liability Disclaimer

    All other products, brands, or trade names used in this document are trademarks or registered trademarks of their respective holders. NEC shall not be liable for technical or editorial errors or omissions contained herein. For hard drive capacity measurements, 1 GB = 1 billion bytes. Actual formatted capacity is less.
  • Page 34: Revision History

    – SYSTEM CONFIGRATION GUIDE NEC Express5800/T110g-E Revision History Revision Date Description Others: April 17, 2015 Added ESXi 6 to the list of operating system supported Part number changed: January 28, 2015 Flash FDD / N8160-96 Discontinued product deleted: November 21, 2014...

Table of Contents