Table of Contents
Advertisement
Modem
Speed
Setup
Wizard
a.
You can set the printer to forward all outgoing or incoming faxes to specified e-mail addresses.
Refer to "Fax Forward to E-mail addresses".
Using an Answering machine
You can connect a telephone answering device (TAD) directly to the back of your printer as shown in Figure
1.
Set your printer to Ans/Fax mode and set the Ring To Answer to a digit greater than the Rings to Answer
setting for the TAD.
When the TAD picks up the call, the printer monitors and takes the line if fax tones are received and
then starts receiving the fax.
If the answering device is off, the printer automatically goes into Fax mode after a predefined number
of rings.
If you answer the call and hear fax tones, the printer will answer the fax call if you
access Fax
or press the remote receive code *9* and hang up the receiver.
Using a Computer Modem
Downloaded from ManualsPrinter.com Manuals
Select the maximum modem speed you want if the phone line fails
to sustain a higher modem speed. You can select 33.6, 28.8, 14.4, 12.0,
9.6, or 4.8 kbps.
Frequently used functions are gathered for users to set fax settings
easily.
On Hook Dial
Yes and press Start (
) and then hang up the receiver,
Advertisement
Table of Contents
Troubleshooting
