Nokia 6016i User Manual page 28

Nokia cell phone user guide

Hide thumbs Also See for 6016i:

Table of Contents

Voice mail services vary by service provider. The following instructions are examples

of common operations. Please check with your service provider for specific

instructions for using your voice mail service.

Write down voice mailbox process

1. Press and hold the 1 key to call your voice mail by as you normally would.

2. Write down your interaction with the recorded prompts step-by-step.

Keep in mind that each voice mail service may vary. However, it should look

something like this:

Dial 2145551212, pause 5 seconds, press 1, pause 2 seconds, press 1234, press #.

Be precise; you will need this information in "Setup voice mail with dialing

codes," p. 27.

Insert dialing codes

Press * repeatedly to cycle through dialing codes. When the desired code appears

in the display, pause briefly and the code is inserted into the dialing string.

The following dialing codes are available:

* —Bypasses a set of instructions.

+—International prefix.

p—Pauses for 2.5 seconds before sending any numbers that follow.

w—Waits for you to press the call key before sending the numbers or codes

that follow.

Setup voice mail with dialing codes

1. In the standby mode, select Contacts > 1-touch dialing.

2. Scroll to 1-touch dialing slot 1 and select Assign.

3. Your voice mailbox number is preprogrammed into 1-touch dialing slot 1.

4. Refer to dialing codes and enter any codes as necessary using the information

that you wrote down from "Write down voice mailbox process," p. 27.

For example, if you pause for 5 seconds after connecting to voice mail,

enter p twice after the voice mailbox number, for example, 2145551212pp.

5. Enter any remaining pauses or other information that allows you to listen to

your messages, and select OK.

6. Enter a name (such as voice mail), and select OK.

To dial and listen to your voice mail, press and hold the 1 key from standby mode.

M e s s a g e s

Table of Contents