Data Connections - Nokia E70 User Manual
Hide thumbs
Also See for E70:
- User manual (209 pages) ,
- Manual del usuario (109 pages) ,
- Service manual (20 pages)
Table of Contents
Advertisement
• You need the appropriate data communications
software on your computer.
• You must subscribe to the appropriate network
services from your service provider or Internet service
provider.
• You must have the appropriate drivers installed on
your computer. You must install drivers for your cable
connection, and you may need to install or update
Bluetooth or infrared drivers.
• It is recommended that you have Nokia Modem
Options installed on your computer.
To connect the device to a compatible computer using
infrared, press the joystick. Make sure the infrared ports
of the device and computer are directly facing each other
with no obstacles between them.
To connect your device to a computer using Bluetooth,
initiate the connection from the computer. To activate
Bluetooth in your phone, select
Bluetooth
and select
Bluetooth
If you use a cable to connect your phone to a computer,
initiate the connection from the computer.
Note that you may not be able to use some of the other
communication features when the device is used as a
modem.
Data connections
This device supports packet data (GPRS), high-speed data
calls (HSCSD), GSM data calls, and wireless LAN.
For more information, see the complete user guide.
62
Packet data
GPRS (general packet radio service) enables wireless
access for mobile phones to data networks (network
service). GPRS uses packet data technology where
information is sent in short bursts of data over the mobile
network. The benefit of sending data in packets is that
the network is occupied only when sending or receiving
data. As GPRS uses the network efficiently, it allows for
quick data connection set-up and fast data transmission
speeds.
You must subscribe to the GPRS service. For availability
and subscription to GPRS, contact your network operator
or service provider.
Enhanced GPRS (EGPRS) is similar to GPRS, but it enables
faster connection. For more information on the
availability of EGPRS and data transfer speed, contact your
network operator or service provider. Note that when you
have selected GPRS as a data bearer, the device uses EGPRS
Menu
Connect.
>
>
instead of GPRS if this is available in the network.
> On.
During a voice call, you cannot establish a GPRS
connection, and any existing GPRS connection is put on
hold unless the network supports dual transfer mode.
Connection manager
Select
Menu
To view the status of data connections or end
connections, select
To search for wireless LANs available within range, select
Availab.
WLAN.
Connect.
Conn
mgr.
>
>
Act. data
conn..
Advertisement
Table of Contents
