Upgrading the System setting up management tools Chapter 3: Useful Features The detail of system BIOS settings, SAS Configuration Utility, and EXPRESSBUILDER Other manuals The detail of NEC ESMPRO, BMC Configuration, and other features. Express5800/R310e-E4, R320e-E4, R320e-M4, R310f-E4, R320f-E4, R320f-M4 User's Guide...
Term indicating a degree of danger attention WARNING Use only the specified outlet Use a grounded outlet with the specified voltage. Use of an improper power source may cause a fire or a power leak. Express5800/R310e-E4, R320e-E4, R320e-M4, R310f-E4, R320f-E4, R320f-M4 User's Guide...
DVD Super MULTI drive Hard disk drive Unless otherwise stated, hard disk drive described in this document refers to both of the following. Hard disk drive (HDD) Solid state drive (SSD) Express5800/R310e-E4, R320e-E4, R320e-M4, R310f-E4, R320f-E4, R320f-M4 User's Guide...
Red Hat Enterprise Linux 7.2(x86_64) POST POST described in this document refers to the following. Power On Self-Test BMC described in this document refers to the following. Baseboard Management Controller Express5800/R310e-E4, R320e-E4, R320e-M4, R310f-E4, R320f-E4, R320f-M4 User's Guide...
Trademarks Trademarks EXPRESSSCOPE and GeminiEngine is a registered trademark of NEC Corporation in Japan. Microsoft, Windows, and Windows Serve are registered trademarks or trademarks of Microsoft Corporation in the United States and other countries. Intel, and Xeon are registered trademarks of Intel Corporation of the United States.
OpenSSL License ------- Copyright (c) 1998-2011 The OpenSSL Project. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: Express5800/R310e-E4, R320e-E4, R320e-M4, R310f-E4, R320f-E4, R320f-M4 User's Guide...
Page 10
BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Express5800/R310e-E4, R320e-E4, R320e-M4, R310f-E4, R320f-E4, R320f-M4 User's Guide...
2. This document is subject to change at any time without notice. 3. Do not make copies or alter the document content without permission from NEC Corporation. 4. If you have any concerns, or discover errors or omissions in this document, contact your sales representative.
Do not remove or black out this label and keep it clean. If no label is attached or printed on the server, contact your sales representative. External view Front view Rear view Express5800/R310e-E4, R320e-E4, R320e-M4, R310f-E4, R320f-E4, R320f-M4 User's Guide...
When disconnecting power cord from the outlet, wait at least 30 seconds before connecting the power cord again. For stable operation, it is recommended to restart the OS after the system has been duplexed. Express5800/R310e-E4, R320e-E4, R320e-M4, R310f-E4, R320f-E4, R320f-M4 User's Guide...
Page 14
Tape media: Approximately 1 day For optional devices, we recommend you use NEC products. Even if they are successfully installed or connected, installation of unsupported devices can cause the server to malfunction or fail. You will be charged to repair failures or damage caused by the use of such products even if it is within the warranty period.
Page 15
Keeping your equipment clean is important not only for the appearance but also for functional and safety reasons. A dusty monitor makes it difficult to see the display contents, so clean it regularly. Take rest breaks When you feel tired, take a break. Light exercise is also recommended. Express5800/R310e-E4, R320e-E4, R320e-M4, R310f-E4, R320f-E4, R320f-M4 User's Guide...
2. Accessories Describes the server's accessories. 3. Features Describes the server’s features and the system management. 4. Names and Functions of Components Describes the name of each part contained in this server. Express5800/R310e-E4, R320e-E4, R320e-M4, R310f-E4, R320f-E4, R320f-M4 User's Guide...
/Linux operating system or VMware ESXi, it also provides outstanding openness for general-purpose applications, etc. To make the best use of these features, read this User's Guide thoroughly to understand how to operate the server. Express5800/R310e-E4, R320e-E4, R320e-M4, R310f-E4, R320f-E4, R320f-M4 User's Guide...
If the serial number does not match the number on the warranty, you may not be guaranteed against failure even within the warranty period. Contact your sales representative if they do not match. Express5800/R310e-E4, R320e-E4, R320e-M4, R310f-E4, R320f-E4, R320f-M4 User's Guide...
The security lock that comes with Front Bezel Management Utilities NEC ESMPRO System BIOS firmware management feature (NEC ExpressUpdate for Windows) Remote management feature (EXPRESSSCOPE Engine 3) Hard disk drive monitoring Express5800/R310e-E4, R320e-E4, R320e-M4, R310f-E4, R320f-E4, R320f-M4 User's Guide...
Page 20
Remote power-on feature AC-Link feature Power switch mask Baseboard Management Controller (BMC) conforming to IPMI v2.0 Self-diagnosis Power On Self-Test (POST) Test and Diagnosis (T&D) utility Express5800/R310e-E4, R320e-E4, R320e-M4, R310f-E4, R320f-E4, R320f-M4 User's Guide...
Page 21
Maintenance features Off-line Tools Memory dump feature using DUMP Switch Feature to back up and restore BIOS/BMC configuration information *1. USB3.0 may be unsupported depending on your operating system. Express5800/R310e-E4, R320e-E4, R320e-M4, R310f-E4, R320f-E4, R320f-M4 User's Guide...
This server is installed on the system as a server management solution. NEC ESMPRO, a GUI-based management tool, allows you to monitor, view, and configure the server. This tool also supports both local and remote management of the server.
Page 23
In addition, you can use alert notification software such as Express Report Service or Express Report Service (HTTPS) to manage the server. It is recommended to use such software to cope with system failure quickly. Ask your service representative for details. Express5800/R310e-E4, R320e-E4, R320e-M4, R310f-E4, R320f-E4, R320f-M4 User's Guide...
Page 24
Report Service be used also to cope with system failures quickly. Ask your sales representative for details. In-service repairing You can repair or replace a failed module even if the server is operating. Express5800/R310e-E4, R320e-E4, R320e-M4, R310f-E4, R320f-E4, R320f-M4 User's Guide...
3. Features Management Features NEC ESMPRO Agent enables you to collectively manage the state of your systems. You can also monitor the server states from a management PC on network where NEC ESMPRO Manager is installed. The features available on this server are as shown in the table below.
3. Features Firmware and Software Version Management for Windows Use of NEC ESMPRO Manager and NEC ExpressUpdate Agent can manage or update versions of firmware and software easily. This feature easily updates the update packages downloaded from NEC ESMPRO Manager.
Off: not in duplex condition (4) System ID LED Identifies the system to maintain. Blue: UID switch was pressed. Blinking in blue: The software command was sent from remote terminal. Express5800/R310e-E4, R320e-E4, R320e-M4, R310f-E4, R320f-E4, R320f-M4 User's Guide...
The names of each part are the same as CPU/IO module 0. (14) EXPRESSSCOPE Indicates the status of CPU/IO modules. Lights or flashes green or amber. (15) Pull-out Tag Shows the product number and serial number of the server. Express5800/R310e-E4, R320e-E4, R320e-M4, R310f-E4, R320f-E4, R320f-M4 User's Guide...
Page 30
(9) Monitor connector Connects to a display. (10) USB connector Connects to the device supporting USB interface. (2 ports) (option) Ports to connect backup devices (internal / external RDX) supported by NEC Express5800/R310e-E4, R320e-E4, R320e-M4, R310f-E4, R320f-E4, R320f-M4 User's Guide...
Chapter 1 General Description 4. Names and Functions of Components External View (1) Front bezel The cover to protect devices in the front. (2) LEDs For more information, see Chapter 1 (4.8 LEDs). Express5800/R310e-E4, R320e-E4, R320e-M4, R310f-E4, R320f-E4, R320f-M4 User's Guide...
Lights while accessing the loaded optical disk. (2) Tray eject button Ejects the tray. (3) Emergency hole If the tray eject button fails to eject tray, insert a metal pin into this hole to forcibly eject the tray. Express5800/R310e-E4, R320e-E4, R320e-M4, R310f-E4, R320f-E4, R320f-M4 User's Guide...
EXPRESSSCOPE SAFE TO PULL LED PRIMARY LED <Rear View> Power unit LED 1G LAN connector Management LAN connector SPEED LED Module ID LED 10G LAN connector LINK/ACT LED (R320e-M4, R320f-M4 model only) Express5800/R310e-E4, R320e-E4, R320e-M4, R310f-E4, R320f-E4, R320f-M4 User's Guide...
This chapter describes preparations for using this server. 1.Installing Internal Optional Devices Describes how to install or remove optional devices. 2.Installation and Connection Describes how to place the server in a suitable location and connect some cables. Express5800/R310e-E4, R320e-E4, R320e-M4, R310f-E4, R320f-E4, R320f-M4 User's Guide...
NEC. Use only the devices and cables provided by NEC. You will be charged to repair damages, malfunctions, and failures caused by the use of any devices or cables not specified for use with this server even within the warranty period.
3. Slide the bezel right a little to take the hook off the frame and remove the bezel. Installation 1. Engage the left hook with the server’s frame. 2. Push the right side of the frame to mount it. Express5800/R310e-E4, R320e-E4, R320e-M4, R310f-E4, R320f-E4, R320f-M4 User's Guide...
Do not pull out the CPU/IO module from the rack when the rack is unstable. Do not provide the wiring for the server to exceed the rating of the power supply. Do not use the server in the environment where corrosive gas is generated. Express5800/R310e-E4, R320e-E4, R320e-M4, R310f-E4, R320f-E4, R320f-M4 User's Guide...
Page 42
Place near equipment that generates power noise (such as contact spark at power-on/power-off of commercial power supply through a relay) Environment where operation of the server is not guaranteed (such as power supply, ambient temperature, and/or humidity) See Appendix (1. Specifications) for details. Tips Express5800/R310e-E4, R320e-E4, R320e-M4, R310f-E4, R320f-E4, R320f-M4 User's Guide...
Review airflow in the rack and room and take sufficient measures so that the internal temperature will not exceed the operational temperature during operation. Air enters the server from the front and exits from the rear. Express5800/R310e-E4, R320e-E4, R320e-M4, R310f-E4, R320f-E4, R320f-M4 User's Guide...
Page 44
To keep balance, install the server as low as you can on the rack. Imprinted mark (2 imprinted marks for 5Us) (Height for installing this server) Imprinted mark Position to install a cage nut Express5800/R310e-E4, R320e-E4, R320e-M4, R310f-E4, R320f-E4, R320f-M4 User's Guide...
Page 45
3. Attach two cage nuts symmetrically into the second square holes from the bottom of chassis. 4U (Top of chassis) 4U (Bottom of chassis) Cage nuts Attached to the second holes from the bottom of chassis Express5800/R310e-E4, R320e-E4, R320e-M4, R310f-E4, R320f-E4, R320f-M4 User's Guide...
Page 46
Inside of the rack 4. Remove two CPU/IO modules from the chassis. Remove the module while lowering the lock lever. Tips 5. Loosen the screw, and remove the DVD drive unit from the chassis. Express5800/R310e-E4, R320e-E4, R320e-M4, R310f-E4, R320f-E4, R320f-M4 User's Guide...
Page 47
8. Temporarily tighten flat head screws attached to the server to the four places at the top and the bottom on front, and back sides (total: 8) from the rear of the rack. Flat head screws Flat head screws Express5800/R310e-E4, R320e-E4, R320e-M4, R310f-E4, R320f-E4, R320f-M4 User's Guide...
Page 48
10. Tighten tightly the four pan head screws on the rear side and the eight flat head screws on the side panels. Pan head screw on rear Pan head screw on side panel Panhead screw on side panel Express5800/R310e-E4, R320e-E4, R320e-M4, R310f-E4, R320f-E4, R320f-M4 User's Guide...
Page 49
12. Mount the DVD drive unit removed in Step 5, and secure it with screws. 13. Mount the CPU/IO module 0 removed in Step 4. 14. Raise the lock levers on the left and right sides. Express5800/R310e-E4, R320e-E4, R320e-M4, R310f-E4, R320f-E4, R320f-M4 User's Guide...
Page 50
2. Installation and Connection 15. Fasten the levers on the left and right sides with screws. 16. Mount the CPU/IO module 1 in the same way as described in Steps 13 through 15. Express5800/R310e-E4, R320e-E4, R320e-M4, R310f-E4, R320f-E4, R320f-M4 User's Guide...
CPU/IO module. 5. Hold firmly the server and remove it from the rack, To remove the mechanical component of the rack, see Chapter 2 (2.2.2 Installing the Tips server to the rack). Express5800/R310e-E4, R320e-E4, R320e-M4, R310f-E4, R320f-E4, R320f-M4 User's Guide...
Do not provide the wiring for the server to exceed the rating of the power supply. Do not use the server in the environment where corrosive gas is generated. Express5800/R310e-E4, R320e-E4, R320e-M4, R310f-E4, R320f-E4, R320f-M4 User's Guide...
Page 53
Do not hold the tower conversion kit by its front door to lift it. The front door may be disengaged and damage the device. After placing the tower conversion kit, lock its two rear wheels out of four. Express5800/R310e-E4, R320e-E4, R320e-M4, R310f-E4, R320f-E4, R320f-M4 User's Guide...
Do not install the CPU/IO module with its cover removed. Do not get your fingers caught. 1. Open the front door of the tower conversion kit. Note If the door is locked, use the provided security key to unlock. Express5800/R310e-E4, R320e-E4, R320e-M4, R310f-E4, R320f-E4, R320f-M4 User's Guide...
Page 55
Tower conversion kit (on the front bottom) 3. Remove one screw from the AC lock bracket on the rear of the tower conversion kit. AC lock bracket 4. Remove the AC lock bracket. Express5800/R310e-E4, R320e-E4, R320e-M4, R310f-E4, R320f-E4, R320f-M4 User's Guide...
Page 56
7. Remove the rack mount bracket (handle) from the front of chassis. Important You cannot close the door with the handle being mounted. Keep the removed handle and screws for future use. Express5800/R310e-E4, R320e-E4, R320e-M4, R310f-E4, R320f-E4, R320f-M4 User's Guide...
Page 57
Push the chassis to the end of tower conversion kit. 9. Fix the chassis to the tower conversion kit with the provided four pan head screws (two for the top side and two for the bottom side). Express5800/R310e-E4, R320e-E4, R320e-M4, R310f-E4, R320f-E4, R320f-M4 User's Guide...
Page 58
Tower conversion kit (on the rear bottom) 11. Mount the AC lock bracket and secure it with one screw. 12. Insert the DVD drive unit to the chassis and secure it with a screw. Express5800/R310e-E4, R320e-E4, R320e-M4, R310f-E4, R320f-E4, R320f-M4 User's Guide...
Page 59
13. Slowly and carefully insert the CPU/IO module 0 into the chassis. 14. Close the levers on the top and the bottom, and then secure the CPU/IO module with screws. 15. Install the CPU/IO module 1 to the chassis with the same procedures. Express5800/R310e-E4, R320e-E4, R320e-M4, R310f-E4, R320f-E4, R320f-M4 User's Guide...
Use only the specified power cord. Do not connect or disconnect the interface cable while the power cord is plugged in the outlet. Use only the specified interface cable Express5800/R310e-E4, R320e-E4, R320e-M4, R310f-E4, R320f-E4, R320f-M4 User's Guide...
Page 61
USB devices supported by the server are Flash FDD, keyboard (including a mouse), and Server Switch Unit (SSU) designated by NEC. Connecting USB devices other than the above will cause malfunctions and failures. ...
4. EXPRESSBUILDER Describes how to use EXPRESSBUILDER. 5. Installing Software Components Describes how to install an operating system and bundled software. 6. Turning off the Server Describes how to turn off the server. Express5800/R310e-E4, R320e-E4, R320e-M4, R310f-E4, R320f-E4, R320f-M4 User's Guide...
2. Power on the display unit and other peripherals connected to the server. If the power code is connected to a power controller (such as UPS), ensure that the Note controller is powered on. 3. Remove the front bezel. Express5800/R310e-E4, R320e-E4, R320e-M4, R310f-E4, R320f-E4, R320f-M4 User's Guide...
Page 65
Do not power off the server while POST is running. While the "NEC" logo is displayed on the screen, the server runs a power-on self test (POST) to check hardware. For details, see Chapter 3 (1.1 POST). Express5800/R310e-E4, R320e-E4, R320e-M4, R310f-E4, R320f-E4, R320f-M4 User's Guide...
Runs Offline Tools. For details, see Chapter 1 (12. Offline Tools) in Maintenance Guide (Windows) , Maintenance Guide (Linux) or Chapter 1 (11. Offline Tools) in Maintenance Guide (VMware). <F12> key: Starts from network. 4. The OS starts when POST is completed. Express5800/R310e-E4, R320e-E4, R320e-M4, R310f-E4, R320f-E4, R320f-M4 User's Guide...
・To restore the default value, choose Save & Exit Load Setup Defaults. Tips Some values are different from the factory settings. ・ Values of ISCSI Configuration submenu of Advanced menu and UEFI Driver Configuration submenu do not return to default values. Express5800/R310e-E4, R320e-E4, R320e-M4, R310f-E4, R320f-E4, R320f-M4 User's Guide...
If you choose Yes, SETUP closes without saving the changes. Quit without saving? [Yes] <F1> key Displays help information. Press <Esc> key to go back to the original screen. Express5800/R310e-E4, R320e-E4, R320e-M4, R310f-E4, R320f-E4, R320f-M4 User's Guide...
Page 70
Configuration submenu do not return to default values. <F4> key Displays the following window. If you choose Yes, the changes are saved and SETUP closes. After closing, the server restarts automatically. Save configuration and exit? [Yes] Express5800/R310e-E4, R320e-E4, R320e-M4, R310f-E4, R320f-E4, R320f-M4 User's Guide...
Advanced USB Configuration Set the XHCI mode to [Auto] XHCI Mode Auto *1 according to your OS. Applied OS: - Windows Server 2016 - Windows Server 2012 R2 - VMware ESX - RHEL7.2 Express5800/R310e-E4, R320e-E4, R320e-M4, R310f-E4, R320f-E4, R320f-M4 User's Guide...
Page 72
OFF even when UPS supplies power. Server Power Control Configuration Keep the power OFF even AC-LINK Stay off when UPS supplies power. *1. The factory setting is preset to the proper setting. Express5800/R310e-E4, R320e-E4, R320e-M4, R310f-E4, R320f-E4, R320f-M4 User's Guide...
2. Press the <F4> key to launch Off-line TOOL while the message is displayed. You can also press the <F4> key while the message is being displayed to open the Off-line TOOL MENU screen. 3. Select your keyboard type on keyboard selection screen. Express5800/R310e-E4, R320e-E4, R320e-M4, R310f-E4, R320f-E4, R320f-M4 User's Guide...
Page 74
4. When the Off-line TOOL MENU appears, select BMC Configuration, BMC Configuration, Network: CPU/IO module 0/1, and then IPv4 Property or IPv6 Property. 5. Configure IPv4 or IPv6 network settings. Figure of IPv4 Property Figure of IPv6 Property Express5800/R310e-E4, R320e-E4, R320e-M4, R310f-E4, R320f-E4, R320f-M4 User's Guide...
Page 75
6. Connect the LAN cable to the management LAN connector in order to connect to the network. Access EXPRESSSCOPE Engine 3 by using a web browser of management PC according to the settings in Step 5. Express5800/R310e-E4, R320e-E4, R320e-M4, R310f-E4, R320f-E4, R320f-M4 User's Guide...
To use this feature, choose OS installation in Boot Selection Menu. (Windows reinstallation) Bundled software Stores NEC ESMPRO, BMC Configuration, and other bundled software. Maintenance Diagnoses the server. To use this feature, choose Tool menu in Boot Selection Menu.
The Module POWER LED on each CPU/IO module will be blinking while AC power is supplied. 3. Power off all peripheral devices. Hibernate feature of Windows Server cannot be used. Do not set Hibernate at Windows Tips shutdown. Express5800/R310e-E4, R320e-E4, R320e-M4, R310f-E4, R320f-E4, R320f-M4 User's Guide...
NEC Express5800 Series Express5800/R310e-E4, R320e-E4, R320e-M4, R310f-E4, R320f-E4, R320f-M4 Appendix 1. Specifications Describes specifications of the server. 2. Glossary Describes glossaries of this document. 3. Revision Record Describes revision history of this document. Express5800/R310e-E4, R320e-E4, R320e-M4, R310f-E4, R320f-E4, R320f-M4 User's Guide...
*3 The USB bus operates in USB 2.0 mode when the system is ・Intel(R) I/O Acceleration Technology running with Windows Server 2008 R2 operating system. ・Thermal Monitoring Technologies ・Intel(R) AVX (Advanced Vector Extensions) *4 Not supported in VMware ・Intel(R) AVX2 (Advanced Vector Extensions 2) Express5800/R310e-E4, R320e-E4, R320e-M4, R310f-E4, R320f-E4, R320f-M4 User's Guide...
Standard software for the server management. This consists of several applications for managing or monitoring. NEC ESMPRO Agent Software for monitoring the server. This works with NEC ESMPRO Manager and resides as the OS service. NEC ESMPRO Agent Extension Software for performing the scheduled operations. This works with NEC ESMPRO Manager.
June 2016 Added the description about VMware 30.102.01-101.04 August 2016 Added the description about Red Hat Enterprise Linux 30.103.01-101.02 July 2017 Added the description about Express5800/R310f-E4, R320f-E4, R320f-M4, and Windows Server 2016 Express5800/R310e-E4, R320e-E4, R320e-M4, R310f-E4, R320f-E4, R320f-M4 User's Guide...