Page 3
D-cover. Step 3. Life the side up. Remove the PWB from the housing. Remove six screws. Note: The picture shows the assembly order. Assembly is in the reverse order. Nokia Corporation Issue 2 09/2003 Confidential Page 3...
Page 4
Note: If the LCD module is to be reused, the use of gloves is mandatory to prevent fingerprints from appearing on the domes and elastomer connector. The domes and the elastomer connector may be damaged, if touched. Nokia Corporation Page 4 Confidential Issue 2 09/2003...
Page 5
You can remove the IR window once the antenna has been removed. Remove the battery connector. Step 10. Push the battery connector from the battery side to remove it. Note: Do not reuse the battery connector after disassembly. Nokia Corporation Issue 2 09/2003 Confidential Page 5...
Page 6
Remove the metal deck. Step 15. Release the four side locks with a screwdriver. Step 16. Push the metal deck from the engine’s side. Note: Do not reuse the metal deck after disassembly. Nokia Corporation Page 6 Confidential Issue 2 09/2003...
Page 7
RH-41 CCS Technical Documentation Disassembly The main parts of the phone disassembled. Nokia Corporation Issue 2 09/2003 Confidential Page 7...