Connecting Your Monitor - Dell UltraSharp 27 User Manual
Usb-c hub monitor
Hide thumbs
Also See for UltraSharp 27:
- User manual (99 pages) ,
- User manual (91 pages) ,
- User manual (75 pages)
Table of Contents
Advertisement
Connecting your monitor
WARNING: Before you begin any of the procedures in this section, follow
the
Safety
instructions.
NOTE: Dell monitors are designed to work optimally with the Dell-supplied
cables inside the box. Dell does not guarantee the video quality and
performance if non-Dell cables are used.
NOTE: Route the cables through the cable-management slot before
connecting them.
NOTE: Do not connect all the cables to the computer at the same time.
NOTE: The images are for the purpose of illustration only. The appearance
of the computer may vary.
To connect your monitor to the computer:
1. Turn off your computer and disconnect the power cable.
2. Connect the HDMI/DisplayPort cable from your monitor to the computer.
3. Turn on your monitor.
4. Select the correct input source from the OSD Menu on your monitor and then
turn on your computer.
NOTE: Default setting is DisplayPort 1.4. A DisplayPort 1.1 Graphic card
may not display normally. Please refer to
image when using DP connection to the PC
Connecting the HDMI cable
Product specific problems - No
to change default setting.
Setting up the monitor
|
37
Hide quick links:
Advertisement
Table of Contents
