Resetting A Sip; Figure 3-13. Sip Version Dialog Box - Dell PowerEdge 180AS Installer/User Manual
8-port and 16-port console switches
Hide thumbs
Also See for PowerEdge 180AS:
- User manual (280 pages) ,
- Cable routing manual (13 pages) ,
- Hardware user's manual (86 pages)
Table of Contents
Advertisement
Figure 3-13. SIP Version Dialog Box
Click X to close the SIP Version dialog box.
5
Resetting a SIP
PS/2 SIPs can be reset using the Reset button in the SIP Version dialog box.
NOTE:
to a tiered switch. On these occasions, it may be necessary to reset the SIP when the tiered switch is not
recognized.
NOTE:
switch, the mouse/keyboard may fail to respond. When this occurs, the target server requires a reboot.
To reset a SIP:
Press <Print Screen>. The Main dialog box will appear.
1
Click Commands - Display Versions. The Version dialog box appears.
2
Click SIP . The SIP Selection dialog box appears.
3
Select the PS/2 SIP that you wish to view and click Version. The SIP Version dialog box
4
appears.
38
Basic Operation
This procedure is only relevant where your Console Switch system involves a PS/2 SIP attached
If a reset is performed when a Console Switch is connected directly to a server and not a tiered
Hide quick links:
Advertisement
Table of Contents
