Input Control Command; Cf_Input Command; Cf_Source Command - Sanyo PLC-XU116 - 4500 Lumens Manual
Expand serial command functional specifications
Hide thumbs
Also See for PLC-XU116 - 4500 Lumens:
- Owner's manual (160 pages) ,
- Manual (26 pages) ,
- Mode d'emploi (12 pages)
Table of Contents
Advertisement
PLC-XU116 Expand Serial Command Functional Specifications
8.6 Input Control Command
8.6.1
CF_INPUT Command
Command
"CF_INPUT_%1"[CR]
"CONPUTER1" ----- Select Computer1 Input
"COMPUTER2" ----- Select Computer2 Input
"VIDEO" --------------- Select Video Input
"S-VIDEO" ------------ Select S-video
%1
"NETWORK" -------- Select Network
"UP" ------------------- Switch Input setting forward
"DN" -------------------Switch Input setting backward
Select Input
Details
The same operation as "INPUT" button of the projector and Remote Control.
This command is available in normal Power ON status.
Acceptable
Response
Unacceptable
8.6.2
CF_SOURCE Command
Command
"CF_SOURCE_%1"[CR]
Input is
Computer 1
Input is
Computer 2
%1
Input is Video
Input is
S-video
Input is
Wireless
Select Source of currently selected Input
When Input specified by %1 is inappropriate for selected Input, the projector
Details
returns "101" and the command is not executed.
This command is available in normal Power ON status.
Acceptable
Response
Unacceptable
Computer1 → Computer2 → Video →S-video→ Network → ...
Network → S-video → Video → Computer2 →Computer1→....
"000"[CR]
"Error Code"[CR]
"ANALOG" --------- Select Analog Input
"YPBPR" ----------- Select Component Input
"SCART" ----------- Select Scart Input
"UP" ---------------- Switch Input as follows
Analog →YPBPR →Scart →...
"DN" ---------------- Switch Input as follows
Scart →YPBPR →Analog →...
"DIGITAL" ---------- Select DVI Input
"HDCP" ------------ Select DVI HDCP Input
"ANALOG" --------- Select Analog Input
"UP" ---------------- Switch Input as follows
DIGITAL → HDCP →ANALOG → DIGITAL ...
"DN" ---------------- Switch Input as follows
ANALOG → HDCP → DIGITAL →ANALOG → ...
"VIDEO" ------------- Select Composite Video Input
"UP"
"DN"
Although there is no option of source, projector accepts
parameter "UP" "DN"
"Sÿ VIDEO" -------- Select S-Video Input
"UP"
"DN"
Although there is no option of source, projector accepts
parameter "UP" "DN"
Network ------------- Select Network
"UP"
"DN"
Although there is no option of source, projector accepts
parameter "UP" "DN"
"000"[CR]
"Error Code"[CR]
25/72
Advertisement
Table of Contents
