Dell Networking 7048 Reference Manual page 1587

Powerconnect 7000 series systems

Hide thumbs Also See for Networking 7048:

Parameter Description

Default Configuration

No community is defined. Default to read–only access if not specified.

Command Mode

Global Configuration mode

User Guidelines

You can not specify

You can use the view name to restrict the access rights of a community string.

When it is specified:

An internal security name is generated.

The internal security name for SNMPv1 and SNMPv2 security models is

mapped to an internal group name.

The internal group name for SNMPv1 and SNMPv2 security models is

mapped to a view name. If ro is specified, then read-view and notify-view

are mapped. If rw is specified, then read-view, notify-view, and write-view

Permits access to the SNMP protocol. (Range: 1-20 characters)

Indicates read-only access.

Indicates read-write access.

Indicates SNMP administrator access.

Specifies the IP address of the management station. If no IP

address is specified, all management stations are permitted.

Specifies the name of a previously defined view. For

information on views, see the User Guidelines below. (Range: 1-

30 characters)

for su, which has an access to the whole MIB.

SNMP Commands

Show Quick Links

Chapters