hit counter script
NEC Express5800/120Rj-2 Configuration Manual
  1. Manuals
  2. Brands
  3. NEC Manuals
  4. Server
  5. Express5800/120Rj-2
  6. Configuration manual
NEC Express5800/120Rj-2 Configuration Manual

NEC Express5800/120Rj-2 Configuration Manual

Nec servers configuration guide
Hide thumbs Also See for Express5800/120Rj-2:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
1.5 Model 120Rj-2
Features
• Quad-Core Xeon E5405/E5420/X5450/X5460 and Dual-Core Xeon E5205/X5260
• DDR2-667 FB-DIMM memory of up to 48GB with ECC, x4/x8 SDDC, memory
mirroring and on-line spare
• SAS disk drives of up to 1.8TB, SATA disk drives of up to 4.5TB
• RAID controller (RAID0/1) as standard
MODEL
N-code
CPU
Clock
2nd Cache
No. of CPU
Intel® 64
Chip set
Front Side Bus
Memory
Standard Capacity
Maximum Capacity
Internal
Standard Capacity
HDD
Maximum Capacity
Disk Controller
RAID*6
Hot-Plug
FDD
DVD-ROM
Drive
LAN Interface
Device Bays [open]
Disk Drive Bays [open]
Expansion Slots
Standard
[open]
Optional Riser card
[N8116- 07]
Optional Riser card
[N8116-
08]* 7
Optional Riser card
[N8116- 18]
Graphics
Remote Management
Power Supply
Cooling Fan
Keyboard
Mouse
External Interface
Main unit form
Dimension
(WxDxH)mm
Weight
Power
Maximum
Temperature and Humidity Condition
Supported OS
(see chapter of S/W for details)
*1Choose one from [N8151-73A] and [N8160-74].
*2 Writing software is not supported.
*3 One PCI Express (x4) slot is occupied by RAID controller.
*4 Keyboard and mouse can use simultaneously by Y cable that is attached to main unit.
*5 When stored at a low or high temperature, the system clock may largely deviate from the current time.
*6 Please refer to "Linux on NEC Express5800" (http://www.nec.co.jp/express/linux/index.html)
*7 The optional Riser card [N8116-08] requires more time for shipping because it is Make-to-order product.
N8100-1408F
N8100-1409F
Dual-Core Intel Xeon
Dual-Core Intel Xeon
E5205
X5260
1.86GHz
3.33GHz
6MB
1066MHz
1333MHz
DDR2-667 FB-DIMM with ECC, x4/x8 SDDC, memory mirror, on-line spare memory
48GB (4GB DIMM x12) (when standard DIMMs are removed)
When installing 2.5-inch HDD cage [N8154-14F]: SAS 1.172TB (146.5GB x8)
RAID 0,1:
Standard,
CD-RW/DVD-ROM combo
1000BASE-T x2 (100BASE-TX and 10BASE-T are supported) (standard)
Full-Height slots
PCI Express (x8): 1[1], PCI-X (64bit/100MHz): 2[2]
Full-Height slots
PCI-X (64/133MHz): 1[1], PCI-X (64bit/100MHz): 2[2]
Full-Height slots
PCI-X (64bit/133MHz, 5V): 3[3]
Full-Height slots
PCI Express (x8): 1[1], PCI Express (x4): 2[2]
EXPRESSSCOPE Engine 2 is configured as standard
Serial x2(D-Sub 9pin)(frontx1, rearx1), USB2.0 x6(frontx2, rearx2, internal x2),
1000BASE-T(RJ-45) x2, LAN for Server Management (100BASE-TX, RJ-45) x1,
Display(Mini D-Sub 15pin) x1, Keyboard/Mouse(PS/2)
485 x 822 x 88 (when front bezel and the protruding objects are included)
800VA/ 790W
770VA/760W
637VA/627W
644VA/634W
During operation: 10 to 35ºC / 20 to 80% (Non-condensing)
When stored: -10ºC to 55ºC / 20% to 80%
Windows Server 2003 Standard Edition (SP1 or later)/ Enterprise Edition (SP1 or later)
Windows Server 2003 R2, Standard Edition / Enterprise Edition
Windows Server 2003 R2, Standard x64 Edition / Enterprise x64 Edition
Model 120Rj-2
N8100-1410F
N8100-1411F
Quad-Core Intel Xeon
Quad-Core Intel Xeon
E5405
E5420
2GHz
2.50GHz
1 (standard) - 2 (max.)
Supported
Intel 5000P
1333MHz
1333MHz
2GB (1GBx2)
Diskless
SATA: 4.5TB (750GB x6), SAS: 1.8TB (300GB x 6)
SAS / SATA
RAID 5,6 : Option (SAS Disk Array Controller is necessary)
Supported
Mandatory
option*1
drive*2
(DVD: x8 max. speed, CD: x24 max. speed)
1[1] (3.5-inch)
6[6] (3.5-inch)
Low profile slots
PCI Express (x8): 1[1], PCI Express (x4):
Low profile slots
PCI Express (x8): 1[1], PCI Express (x4):
Low profile slots
PCI Express (x8): 1[1], PCI Express (x4):
Low profile slots
PCI Express (x8): 1[1], PCI Express (x4):
Integrated in Server Management Controller (8MB)
Standard: 1unit (Not Redundant)
Option: Max. 2 units (Redundant) (Hot-plug)
Standard: Not Redundant
Option: Redundant (Hot-plug)
Option
Option
19inch rack mountable, 2U rack height
445 x 722 x 88
21kg (standard) / 31kg (max.)
800VA/790W
800VA/790W
644VA/634W
644VA/634W
(Non-condensing)*5
Red Hat Linux
*6
120Rj-2
N8100-1440F
N8100-1412F
Quad-Core Intel Xeon
Quad-Core Intel Xeon
X5450
X5460
3GHz
3.16GHz
2 x 6MB
1333MHz
1333MHz
2[1]*3
2[1]*3
2[1]*3
2[1]*3
x1*4
880VA/870W
880VA/870W
656VA/646W
656VA/646W
1-5-1

Advertisement

Table of Contents
loading

Related Manuals for NEC Express5800/120Rj-2

Summary of Contents for NEC Express5800/120Rj-2

  • Page 1 *5 When stored at a low or high temperature, the system clock may largely deviate from the current time. *6 Please refer to “Linux on NEC Express5800” (http://www.nec.co.jp/express/linux/index.html) *7 The optional Riser card [N8116-08] requires more time for shipping because it is Make-to-order product.

  • Page 2: External Design

    120Rj-2 External Design With standard HDD cage (3.5-inch hard disk drive bays) Front View STATUS LED UID LED FDD bay UID Switch Optical disk drive LAN Access POWER Switch LEDs DUMP Switch POWER Serial port Connector DISK ACCESS USB Connectors Hard Disk bay Backup device bay Rear View...
  • Page 3 120Rj-2 External Design With optional 2.5-inch HDD cage (2.5-inch hard disk drive bays) Front View STATUS LED UID LED FDD bay UID Switch Optical disk drive LAN Access POWER Switch LEDs DUMP Switch POWER Serial port Connector DISK ACCESS USB Connectors Hard Disk bay Backup device bay Rear View...

  • Page 4: Additional Memory Module

    • DIMM must be inserted from Group #1 toward Group#6 in ascending order. • To enable the memory mirroring and on-line sparing mode, see next page. DIMM bank • When you use locally procured non-NEC memory modules, see Chapter 2 Information of Local Procurement. Maximum available memory - See the table below for the maximum memory size that you can actually use on your system.
  • Page 5 120Rj-2 Memory Mirroring / On-line Spare Memory The 120Rj-2 supports memory mirroring and online spare memory as standard to improve memory reliability. • Follow the rules for installing memory DIMMs. • To enable online spare memory, go to BIOS Setup. •...
  • Page 6 120Rj-2 • A color display, a keyboard and a 2-button mouse are necessary but NOT provided with the main unit as standard. Display - Local procurement Video I/F (Mini D-sub 15pin) Keyboard - 104-key keyboard (US-English) [N8170-19]* Y cable (PCI/on-board) *provided with the main unit Keyboard/...

  • Page 7: Cd-Rw/Dvd-Rom Combo Drive

    120Rj-2 CD-RW/DVD-ROM combo drive (standard) Optical Disk Drive bay (Internal IDE I/F) • Provide either a Built-in or an External FDD for maintenance and OS installation purpose. • Automatic System Recovery of Windows Server 2003 operating system and Disaster Recovery Option of backup software are available for both FDD. EL4x64 2003 R2x64...
  • Page 8 120Rj-2 Internal SCSI Backup Device Internal SCSI Backup Device 2003 R2x64 EL4x64 Internal backup devices - Built-In DAT [N8151-51A] <DDS-3/4/DAT72 ; 36GB> - Built-In AIT [N8151-55A] <AIT-1 Turbo, 40GB> - Built-In AIT [N8151-54A] <AIT-2 Turbo, 80GB> 3.5 inch - Built-in AIT [N8151-65A] <AIT3Ex, 150GB> Device bay - Built-in AIT [N8151-75] <AIT5, 400GB>...

  • Page 9: Rack Mount Option

    120Rj-2 LAN I/F (RJ-45) LAN connection <1000BASE-T / 100BASE-TX / 10BASE-T> LAN I/F (RJ-45) • Standard on-board LAN interfaces can configure AFT/ALB. • Standard LAN interface and optional LAN board cannot configure AFT/ALB. • One serial I/F is on the front panel and the other is on the rear panel. (Front panel) Serial I/F RS-232C straight cable...
  • Page 10 • Choose one configuration from the varieties below. •The HDD carriers are NOT required for locally purchased non-NEC HDDs as the HDD carriers are provided with the main unit. See the “Information of Local Procurement” in the Chapter 2 for details.
  • Page 11 120Rj-2 2003 R2x64 HDD Configuration (3) EL4x64 2.5-inch hard disk drives SAS / RAID 0,1 / Hot Plug HDD Configuration (4) 2003 R2x64 EL4x64 2.5-inch hard disk drives SAS / RAID 0,1,5,6 / Hot Plug Optional HDD Cage [N8154-14F] (2.5-inch bays) HDDs <2.5-inch SAS, Hot plug>...
  • Page 12 -1000BASE-T adapter (PCIe(x1)) [N8104-126]* -1000BASE-T adapter (PCIe(x4)) [N8104-121]* -1000BASE-T adapter (PCIe(x4)) [N8104-122] -10GbE adapter (PCIe(x8)) [N8104-123A]* 2003 R2x64 * For locally purchased non-NEC LAN adapters, see the “Information of Local Procurement” in the Chapter 2. SCSI controller 2003 R2x64 for Device Expansion Unit EL4x64 - SCSI controller [N8103-95] <Ultra160 SCSI>...
  • Page 13 120Rj-2 Server Management (EXPRESSSCOPE Engine 2) On-board The 120Rj-2 features the EXPRESSSCOPE Engine 2 remote management controller as standard. The RAS chip optional Remote KVM and Media License [N8115-03] allows for advanced server management. Standard EXPRESSSCOPE Engine 2 SystemGlobe DianaScope 1 license (or equivalent of [UL1198-001]) •Features a dedicated LAN port (100BASE-TX/10BASE-T) for...
  • Page 14 120Rj-2 Optional Boards and Adaptable Expansion Slots Standard Slots Standard riser card*2 Product name Bus A Bus B Bus C Bus D Bus E PCIe PCIe PCIe PCI-X PCI-X PCIe N code 64bit Remarks 100MHz Slot size Low Profile Full Height (Full-height or Low Profile) Supported board type x4 socket...
  • Page 15 120Rj-2 Optional Boards and Adaptable Expansion Slots Optional riser card Standard Slots [N8116-07]*2 Product name Bus A Bus B Bus C Bus D Bus E Bus F PCIe PCIe PCIe PCI-X PCI-X PCI-X N code Remarks 64bit/ 64bit/ 64bit 100MHz 133MHz /100MHz Slot size...
  • Page 16 120Rj-2 Optional Boards and Adaptable Expansion Slots Optional riser card Standard Slots [N8116-18]*2 Product name Bus A Bus B Bus C Bus D Bus E Bus F PCIe PCIe PCIe PCI-X PCI-X PCI-X N code Remarks Slot size Low Profile Full Height (Full-height or Low Profile) Supported board type...
  • Page 17 120Rj-2 Adding File Device 1. Standard Configuration Hard Disk Drive SAS/SATA2 ID 0,1,2 Hard Disk Drive SAS/SATA2 ID 3,4,5 RAID Controller (Standard) 2. Standard Configuration with IDE Backup Device Hard Disk Drive SAS/SATA2 ID 0,1,2 Hard Disk Drive SAS/SATA2 ID 3,4,5 Internal IDE Backup Device...
  • Page 18 120Rj-2 3. Standard Configuration with SCSI Backup Device *Requires a SCSI controller [N8103-95/-107] and an Internal SCSI Cable [K410-147(00)] to use SCSI backup device Internal SCSI Cable [K410-147(00)] Hard Disk (option) Drive SAS/SATA2 ID 0,1,2 Hard Disk Drive SAS/SATA2 SCSI Controller ID 3,4,5 [N8103-95/-107] SCSI...

This manual is also suitable for:

120rj-2

Table of Contents