Process Restartable; Redundancy Auto-Failover-Limit - Dell Force10 S4810P Reference Manual

Ftos command line reference guide for the s4810 system ftos 9.1.(0.0)

Hide thumbs Also See for Force10 S4810P:

Table of Contents

process restartable

Enable a process to be restarted. Restartability is subject to a maximum restart limit. This limit is defined as a configured

number of restarts within a configured amount of time. On the software exception that exceeds the limit, the system

reloads (for systems with a single RPM) or fails over (for systems with dual RPMs).

E-Series, S4810

process restartable [process] [count number] [period minutes]

By default, a process can be restarted a maximum of three times within one hour. On the

exception that exceeds this limit, the system reloads or fails over.

Command Modes

CONFIGURATION

Command History

Version 8.3.12.0

Version 8.4.1.0

show processes restartable

Specify an auto-failover limit for RPMs. When a non-recoverable fatal error is detected, an automatic RPM failover

occurs. This command does not affect user-initiated (manual) failovers.

C-Series, E-Series, S4810

redundancy auto-failover-limit [count number [period minutes] |

period minutes]]

To disable the auto-failover limit control, use the no redundancy auto-failover-

limit command.

Configure a process to be restartable.

Enter the number of times a process can restart within the configured

period. The range is 1 to 3. The default is 3.

Enter the amount of time within which the process can restart count

times. The range is 1 to 60 minutes. The default is 60 minutes.

Introduced on the S4810.

Introduced on the E-Series.

Enter the number of times the RPMs can automatically failover within

the period defined in the period parameter. The range is 2 to 10. The

default is 3.