Table of Contents
Advertisement
3
Enter a user account password when prompted and click [Next] to
continue.
4
Please check the contents when the [Please read the license terms] page is
displayed.
5
After checking the contents, check [I accept the license terms] and click
[Next] to continue.
If you do not accept the license terms, setup cannot continue.
6
When the [Help protect your computer and improve Windows
automatically] page is displayed, please select either [Use recommended
settings], [Install important updates only], or [Ask me later].
7
When the [Review your time and date settings] message appears, set [Time
zone], [Date], and [Time], and then click [Next].
8
When the screen to set up the connection to a wireless network is
displayed, click [Skip].
The screen should change several times during this process, and it may take
some time before the desktop is displayed.
9
When the [Shut down your computer] dialog is displayed, click [OK].
10
Click [Start].
11
Click [Shut down].
The computer power will then turn off.
After Windows setup has completed, Windows Experience Index measurements are
performed once your computer continues to be in an idle state for around 15 minutes.
While these measurements are in progress, the power plan will change to [High
performance]. At this time, you may notice the power to the display cutting out.
4
If you encounter problems during setup
The setup screen is not displayed
When [Press F2 to Enter BIOS Setup] is displayed on the screen when you turn the
power on, please carry out the following procedure.
1
Press the <F2> key.
The BIOS setup utility will then be displayed.
2
Use the number keys to enter the current hour (24 hour time format) and
then press <Enter>.
3
Use the <Tab>, <>, and <> keys to move to desired position and in the
same manner, set the rest of the time and date in the order of minutes,
seconds, month, day, and year.
4
Press the <F9> key.
The setup confirmation screen should come up.
5
Select [Yes] and then press <Enter>.
The BIOS setup utility will then be displayed.
6
Press the <F10> key.
The setup confirmation screen should come up.
7
Select [Yes] and then press <Enter>.
The BIOS setup utility should now be finished and Windows will automatically
restart.
After this, please see "Setup Procedure" (p.3) and continue on with the process.
If you accidentally turn off the power during setup
The setup process will not be successfully completed and Windows system files or
the registry may be corrupted.
In this case, either perform Windows recovery or consult your place of purchase.
The computer is unresponsive or shows an error message during setup
Make a note of the error message and hold down the power switch for at least four
seconds to perform a forced shutdown.
Please wait for at least five seconds before turning the power switch back on. After
that, please see the above "If you accidentally turn off the power during setup".
Hide quick links:
Advertisement
Table of Contents
