Advertisement
RA-8
5 - Disassembly/Reassembly Instructions
34.) Note the placement of the RF Coax
Cable before continuing the disassembly.
36.) Remove the RF Coax Cable from its
guidance.
38.) Lift RF connector straight up by using
angled tweezers, do not bend it sideways.
Issue 1 11/05
COMPANY CONFIDENTIAL
Copyright © 2005 Nokia. All Rights Reserved.
35.) First remove the Antenna Assy.
Not open the Antenna RF connector!
37.) Do not pull up on the cable.
For repair only!
RF Coax Cable cannot be disconnected
from the Antenna. If Antenna Assy or RF
Coax Cable is defect, use always a new
Antenna Assy and a new Coax Cable.
First place the Antenna Assy onto the
Shield and than connect the RF Coax
Cable.
Nokia Customer Care
Do
10
Advertisement
