Advertisement
RA-8
5 - Disassembly/Reassembly Instructions
45.) Unscrew the Torx Plus
47.) Remove the QWERTY flex from the
connector carefully.
For assembly only!
Always use new screw when re-assembling!
For assembly use a Torx Plus
with a torque setting of 25Ncm.
Issue 1 11/05
®
size 6 screw.
®
size 6 driver
COMPANY CONFIDENTIAL
Copyright © 2005 Nokia. All Rights Reserved.
46.) Turn the Engine Module. Take care of
the RF Gasket.
For assembly only!
Place the Engine Module onto the Shield.
Take care of the RF Gasket.
For assembly only!
Put the flex into the connector carefully by
using the flex assembly tape.
Nokia Customer Care
12
Advertisement
