Table of Contents
Advertisement
Steps
1. Slip the stylus through the hole to create a knot that holds the tether to the chassis.
2. Insert the stylus into the slot on the tablet.
NOTE:
When not in use, avoid hanging the stylus that is detached from its groove.
Next steps
1. Follow the procedure in
Display assembly
Removing the display assembly
Prerequisites
1. Follow the procedure in
2. Remove the
batteries cover
3. Remove the
system
cover.
4. Remove the batteries.
5. Remove the stylus.
CAUTION:
Once removed, the original display assembly cannot be reused. To maintain IP20 rating, a new display
assembly must be installed.
About this task
The figure indicates the location of the display assembly and provides a visual representation of the removal procedure.
30
Field service information
after working inside the
tablet.
before working inside the
assembly.
tablet.
Advertisement
Table of Contents
