Includes RSA BSAFE cryptographic or security protocol software from RSA Security. The information contained in this user guide was written for Nokia phone 3285. The right to make changes and improvements to any of the products described in this guide without prior notice is reserved. EXPORT CONTROLS This product contains commodities, technology or software exported from the United States in accordance with the Export Administration regulations.
1 For your safety Read these safety guidelines before using your mobile phone (called phone throughout this guide). Failure to comply with these guidelines could prove either dangerous or illegal. • ROAD SAFETY COMES FIRST Don’t use a phone while driving. Park the vehicle first. •...
• USE SENSIBLY Use only in the normal position (to ear). Avoid unnecessary contact with the antenna when phone is on. • QUALIFIED SERVICE Only qualified service personnel can install or repair cellular phone equipment. • ACCESSORIES AND BATTERIES Use only approved accessories and batteries. Do not connect incompatible products.
2 Welcome • BEFORE YOU BEGIN This section provides information needed before you use your phone. This guide describes the Nokia 3285 phone, which is approved for use in AMPS 800, CDMA 800, and CDMA 1900 networks. • UNDERSTAND NETWORK SERVICES This guide describes a number of features known as network services.
• CONTACT NOKIA To help Nokia promptly answer your questions, please have your phone’s model number, ESN number, and your local zip code ready when you call Customer Service. The ESN and model number are on the back of your phone under the battery.
3 Prepare your phone for use • INSTALL THE BATTERY Place the battery in the grooves on the back of your phone, then slide the battery upward until it clicks. • CHARGE THE BATTERY Before you use your phone and when the battery runs down, you need to charge it.
Disconnect the charger from the AC outlet and the phone: • When a charger is not in use, disconnect it from the power source. • Do not leave the battery connected to a charger for longer than a week. Overcharging the battery could shorten its life span. If left unused, a fully charged battery will discharge itself over time.
4 Get to know your phone • KEYS AND SCREEN Earpiece Screen Scroll keys Talk key Voice mail Special character keys Get to know your phone Microphone [ 7 ] Retractable antenna (pull here to extend it) Power key Selection keys End key Number keys...
Page 17
Keys Power key Switch the phone on or off (press and hold for more than one second Selection keys Perform the function indicated by the text on the screen above the key Scroll keys • Scroll menu items and move the highlighter line up and down in a list of displayed items •...
Number keys Enter numbers and letters Enter a space while entering text, press Call your voice mailbox, press and hold Make an emergency call, press Make a call using one-touch dialing (press and hold the appropriate number key) Star key - Insert special characters Pound key •...
Tip: While entering characters into your phone, if you press characters are not saved. • NAVIGATION KEYS Selection keys Use the selection keys to navigate through and select the phone’s many options. At the Start screen, two options appear: Menu and Names. The selection keys are just below these options: •...
Scroll bar When you press Menu, a scroll bar appears on the far right side of the Start screen. This bar appears as a straight line with one tab, and it indicates your location in the menu. As you progress through the menu, the tab moves lower on the scroll bar.
Page 21
Letter mode (upper case) - Characters are entered as upper case letters. To switch to lower case letter mode, press Number mode - Characters entered are numbers. When you are entering letters, you can switch to the number mode by pressing and holding Reminder (To Do) - You have a calendar reminder to do something.
5 Make and answer calls • MAKE A CALL If keyguard is active, press Unlock, then the star key to deactivate it. Enter the phone number (if necessary, enter a 1 and the area code). If you make a mistake while entering the number, press it to the right.
NOTES • If the Anykey answer feature (Menu 4 > 1 > 4) is set to On, you can answer the call by pressing any key except if Keyguard is active, you must press if the Anykey answer feature is set to On. •...
Tip: For best results, fully extend the antenna. As with all radio transmitting devices, do not touch the antenna unnecessarily when the phone is on. Contact with the antenna affects call quality and may cause the phone to operate at a higher power level. An indicator on the left of the Start screen displays the radio signal strength.
6 Use phone menus • NAVIGATE MENUS A menu lists choices that appear on your phone’s screen. To navigate menus, you can scroll or use shortcuts. Scroll through menus You can navigate menus by scrolling through them: • Menu appears above the left selection key only while the Start screen is displayed.
• LIST OF MENU SHORTCUTS Your phone’s menu may differ from the following list. The list depends on the network services to which you subscribed and the accessories you are using. If you have any questions, call your service provider. 1 MESSAGES 1 Text messages (0-1-1) 1 Write new* (0-1-1-1)
7 Enter characters into your phone Note: To enter characters quickly into a mobile message, see “Working with predictive text input” on page 66. • ENTER CHARACTERS (EXCEPT IN A PHONE NUMBER FIELD) Use the following guidelines when entering characters into any field except a phone number field (for example, the Name field in your phone book, a note in your calendar, or a mobile message): Enter letters...
To change between letter entry mode ( (123), press and hold the pound key ( Enter a space To enter a space, press the 0 key ( Enter special characters To quickly enter one of the most common special characters, press the 1 key ( ) several times until the character appears.
8 Use the phone book Note: Your phone book stores up to 200 names with phone numbers. Numbers can contain 32 digits; names can contain 26 characters. Make entries unique; you cannot store identical names in your phone. Example: You can’t have one entry for John Jones with a home number and another entry for John Jones with a work number.
Change views You can view your phone book in three different ways: Shows all the names that are stored in your phone Name list book. Three names appear on the screen at a time. Shows individual names and numbers. One name Name+number appears on the screen with its corresponding phone number.
You can also enter numbers by using a shortcut from the Start screen: Enter a phone number, and press Save. Enter a name at Name. Note: Step 2 is optional. Press OK. • CHANGE A STORED PHONE NUMBER You can change a number without changing its associated name. Press Names.
Scroll to the appropriate name. Press number. At the Start screen, press Names. Enter the first few letters of the name you want to call. When the appropriate name/number appears on the screen, press to dial this number. At the Start screen, press Names. At Search, press Select.
• ERASE THE ENTIRE PHONE BOOK You can erase the contents of your phone book. Note that this action cannot be reversed! Once you have performed this procedure, all the stored information in your phone book is erased. To erase all the contents of your phone book: Press Names.
9 Use voice mail Voice mail is a network services feature. Colleagues who miss you when they call can leave a voice message, which you can retrieve later. • RETRIEVE A MESSAGE You will be notified when a voice message is available: •...
Enter your voice mailbox password, and press OK. Your voice mailbox number can be up to 32 digits long and is used until it’s changed. Therefore, if your phone number changes, you may need to change your voice mailbox number along with it. •...
Voice message notification A caller who leaves a voice message can specify a priority level if your network supports this feature: • New voice message: This normal priority message can be sent by anyone. • Urgent voice mail: The person who sends an urgent message is requesting an immediate reply.
10 Work with the call log The Call log (Menu 2) records information about the last 10 calls made, received, or missed: • Phone number associated with the call • Date and time when the call connected The call log records the length of the most recent call you made or received, the total of all calls you made or received during a time period (Call timer), and the total duration of all calls you make or receive during the lifetime of your phone (Life timer).
• Erase - Allows you to erase the entry from the call log. • View number - Allows you to view the associated phone number in your phone book. (Appears only if a name from your phone book appears on the screen.) Press Select.
Scroll to All calls. The call timer value is displayed. Note: Your phone has a separate timer for each NAM assigned to your phone. The timer values apply to the currently-selected NAM. LIFE TIMER The life timer records the total duration of all calls for the entire life of your phone.
11 Use advanced calling features • SET IN-CALL OPTIONS Your phone allows you to use several features during a call. These features are in-call options. Note: Many in-call options are network services features that may require a subscription from your service provider. You cannot use all options at all times.
• USE NETWORK FEATURE CODES Call forwarding, Call waiting, and Send own caller ID with next call are network services available through your service provider. When you subscribe to these services, your service provider gives you a feature code that you store in your phone to activate the service.
The phone calls the network to confirm activation of the feature. After network confirmation, the feature is available for use. Deactivate network features Use the appropriate menu shortcut for the feature you want to deactivate (Settings > Network services > feature name): •...
When Caller ID is active, your phone may display the caller’s phone number. The caller’s name may also display if their name and number has been stored in the phone book or if the wireless network supports it. Call or Call-caller ID unavailable will display when the wireless network doesn’t recognize the calling number.
This procedure assumes that you stored the Call forwarding feature code in your phone and activated the feature. If you have not completed these steps, you may be able to enter the code manually when you forward your calls. Just enter the feature code (for example, by the phone number where you will forward your calls, then press Press Menu 4 >...
• USE A CALLING CARD The calling card feature allows you to store calling card information in your phone, making it easy for you to make a calling card call quickly. Your phone can store information for four calling cards. Determine the dialing sequence for your card Before you store the calling card information in your phone, determine the dialing sequence for your calling card.
Determine the dialing sequence for your card. Scroll the list of dialing sequences until the one you want appears, then press Select. When you are prompted, enter the information (access number, card number, or prefix number). After entering each number, press OK. At the access number prompt, if your access number is entered in your phone book, press Search to retrieve it quickly.
• CHOOSE TO BLOCK CALLER ID In most service areas, when you call someone, their caller ID system allows them to see your name and phone number. Your phone is set to allow this information to be seen automatically. Before you make a call, you can choose to block caller ID and prevent the recipient from seeing your name and phone number.
• However, your phone can be activated in up to two different service areas. For example, your phone could be activated in Dallas and New York. Each service area assigns a different phone number or account to your phone. You must select a phone number for your home system. If you travel outside your home system, you can choose another number.
• SET TOUCH TONES Touch tones are sounds produced when you press the phone keys. Sometimes, touch tones are called DTMF tones. You can use touch tones for many automated services such as checking bank balances and airline schedules and using your voice mailbox. Touch tones can be sent only when a call is active.
Page 52
STORE TOUCH TONE STRINGS WITH PHONE NUMBERS Enter the phone number that you want associated with a touch tone. Press w (wait) or p (pause) where needed. w (wait): When you specify wait, your phone dials the number, then waits (because you chose w) for you to press Send. When you press Send, the phone sends your touch tone.
12 Customize your phone • UNDERSTAND PROFILES A profile is a “set of settings” you can use to customize the way your phone works. You can set your preferences for these items: • Ringing options • Ringing volume • Ringing tone •...
• CUSTOMIZE A PROFILE Press Menu 3 (Profiles). Scroll to highlight a profile. Note: The Handsfree and Headset profiles do not appear unless your phone has been connected to these accessories. If you connect your phone to a handsfree device, these profiles remain in the menu, unless you choose to restore your phone’s factory settings.
• Ascending - The ringing volume increases (gets louder) with each ring. • Ring once - The phone rings once (helps prevent disturbing others). • Beep once - The phone beeps once (helps prevent disturbing others). • Silent - The phone makes no sound. Set the ringing volume You can set the default ringing volume for incoming voice calls and message alert tones.
Press Options. Highlight Customize, and press OK. Scroll to Ringing tone, and press Select. Scroll to the ringing tone you want to use, and press OK. Set a vibrating alert You can set your phone to vibrate when you receive a voice call. This feature is one of the settings in your phone’s profiles: Press Menu 3 (Profiles).
To turn warning tones on and off: Press Menu 3 (Profiles). Your phone lists each profile. Scroll to the profile you want to change, and press Options. Scroll to Customize, and press OK. Scroll to Warning and game tones, then press Select. Scroll to On or Off and press OK.
Set the lights (handsfree device only) While your phone is connected to a handsfree device, you can specify either of two settings for the lights: • Lights on only when you use the phone • Lights on the entire time the phone is connected to the device Note: This feature works only when your phone is connected to a handsfree device.
Note: The memory, timers, language selection, security code, and lock codes are not reset. However, any profiles you modified are reset when you restore your settings. Press Menu 4 > 2 > 4 (Settings > Phone settings > Restore factory settings).
Allow the network to set the clock Press Menu 4 > 2 > 1 (Settings > Phone settings > Clock). Scroll to Time settings, and press Select. Scroll to Set by network, and press Select. NOTES • If you are outside your network and allow the network to set the clock, you will be prompted to set the clock manually.
• ADD A WELCOME NOTE You can set your phone to display a welcome note each time you switch on your phone. This note could say, for example: Hello. It could include your name, a reminder, or more. The maximum length of this note is 36 characters. Press Menu 0 >...
To call a number using one-touch dialing, press and hold the appropriate key for a few seconds. The phone dials the number. Change one-touch dialing numbers After you have assigned a one-touch dialing number to a key, you can change key and number associations at any time. Press Names.
NOTES • Depending on your service provider, it may not be possible to use the emergency key 9 feature to make an emergency call if: the feature has not been activated; Keyguard is active (see “Activate keyguard” on page 58 on page 57.);...
• IDENTIFY CALLERS BY CUSTOM RINGING TONES You can assign a ringing tone to an entry in your phone book, allowing you to identify the caller by the tone you hear when they call. To use this feature, you must subscribe to the Caller ID service that is available from your service provider.
• CHANGE YOUR SECURITY CODE Important: The default security code is 12345. Nokia highly recommends that you immediately change this code, write down the new code, and store it in a safe place, away from your phone. You cannot activate or use certain phone features until you successfully enter your security code.
Important: The default lock code is 1234 (or the last four digits of your phone number, depending on your service provider). Nokia highly recommends that you immediately change this code, write down the new code, and store it in a safe place, away from your phone.
Call an unlocked phone number • Press • At the Start screen, enter the phone number. Press Answer a call while the phone is locked Press any key except Change your lock code Press Menu 4 > 3 > 2 > 3 (Settings > Security settings > Access codes >...
Deactivate keyguard • Press Unlock., then • Press and hold Answer a call while keyguard is active • Press , OR... • If Anykey answer is set to On, press any key except (During an incoming call, Keyguard is automatically deactivated. When you end the call, Keyguard is automatically activated again.) NOTES ABOUT KEYGUARD •...
After you have used the Add restriction option to add at least one restriction, the following options are then available: • Select: Allows you to set call restrictions from the outgoing calls list. • Edit: Allows you to edit an existing outgoing call restriction. •...
Restrict incoming calls To restrict incoming calls: Press Menu 4 > 3 > 1 (Settings > Security settings > Restrict calls). Scroll to Restrict incoming calls, and press Select. Enter your security code, and press OK. Scroll to All calls, and press Mark. Press Unmark to remove an already-set restriction.
14 Select System The System menu (Menu 5) allows you to customize the way your phone chooses a system in which to operate while you are “roaming” (using your phone outside your primary or “home” system). Your choice of a system affects the type and amount of charges you incur.
System choices If you have more than one phone number (NAM), your choice affects only the currently selected number. Select Menu 5 and select from the following choices. Note: System choices may differ, depending on service provider. • Home area: Your phone cannot roam. This means you can make and receive calls in your home area only.
15 Send and receive mobile messages When you have mobile (text) messaging service, you can receive messages on the screen and send messages to e-mail addresses and phone numbers. Note: Before you send or receive mobile messages, you may need to subscribe to the messaging service offered by your service provider.
Page 74
• Predictive text input method: In the predictive text mode, your phone “guesses” which word you are entering. This mode requires that you press a key only once for each letter you enter. Note: To learn more about using Predictive Text when creating messages, see “Working with predictive text input”...
Characters . , @ ’ ? ! -1 ABC2 DEF3 GHI4 JKL5 MNO6 Change the text input method To switch (toggle) between predictive and traditional text input modes while you are editing a message, press the Pound key until the icon indicates the mode you want to use. You must activate predictive text before you will be able to toggle between the two modes.
Page 76
Activate predictive text mode Predictive text mode is active when the predictive text icon ( present at the top of the screen. If the icon does not appear, predictive text mode has been deactivated. To activate the predictive text mode while editing a message: Press Options.
Change the dictionary language You can change the dictionary language while you are editing a message: While editing a message, press Options. Scroll to Predictive text, then press Select. Scroll to a language, then press OK. The selected language is active. •...
Deleting characters When you need to delete characters use one of these methods: • To delete one character to the left of the cursor, press Clear. • To delete all characters in the message, press and hold Clear. Changing letter case modes You can switch (toggle) between uppercase letter mode by pressing the Pound key If the predictive text mode is active and you don’t wait at least 1.5...
While you are editing a message, press Options. Scroll to Add template, then press Select. Scroll to the template you want to use. For example: 1. Call me at [ ]. <phone number/time/place> 2. I’ll call you at [ ]. <time/place> Brackets ([ ]) in a template represent a value that you can specify.
• MESSAGE OPTIONS While reading a message, you have several options. Some of these options may not be available for some types of messages: Erase deletes the message. Press OK to confirm the deletion or Clear to cancel. Reply allows you to send a return message to the sender. Save sends the message to the Saved folder.
• Inbox: All messages that you received and have not erased or saved. • Outbox: Messages that you sent or created and saved to send later. • Saved: Messages that you saved from the Inbox or Outbox. If the memory is full when you receive a mobile message: Non-emergency Message: The oldest sent message in the Outbox •...
Notes about addresses • You can address a text message to as many as 10 e-mail addresses, phone numbers, or a combination of both. To see a list of all recipients to whom your message is addressed, scroll to List recipients, then press Select. •...
Page 83
• Delivery note: When the recipient receives your message, the network will send you a delivery note. If you address the message to more than one recipient, you will receive a separate delivery note for each recipient. • Callback no.: Allows you to enter a phone number at which the recipient can call you.
Page 84
Send a number-only message To create a text message, see “Create a text message” on page 72. For information about types of messages, see “Send and receive e-mail messages” on page 78. Press Menu 0 > 1 > 1 > 1 (Messages > Text messages > Write new). Note: If Text and Number only appear in a list of menu items, scroll to Number only, then press Select.
• Before you resend your message, you can edit it. You can also edit the recipients list (Add e-mail, Add number, or List recipients). • Settings (Urgency, Delivery note, and Callback no.) for the message are kept unless you edit them (Options > Settings). To send the message, press Options, scroll to Send, then press Select.
Scroll to the message, press Read, and then press Options. Scroll to Reply (or Reply w/ copy if you want to include a copy of the original message in your reply). If you reply with copy, your message could be long. In some networks, a long message is shortened and the recipient may not see all of it.
16 Send and receive e-mail messages You can use your phone to send and receive e-mail messages. You no longer need to be at your computer to send or receive messages. The e-mail feature is not available from all service providers. •...
Enter the phone number. Press OK. The message Saved appears briefly, confirming your action. Press Options, scroll to E-mail address. Press Select. The e-mail address box opens. Enter the address. Insert special characters such as the “dot” and @ signs by pressing Press OK.
Page 89
• If you press Search, enter the first few letters of the name you want. Press OK when you find the name. The address appears in the Recipient address box. Press OK. • The phone lists all the names from your phone book. If you select a name for which there is no e-mail address, your phone displays the message, No e-mail address for this name.
• REPLY TO OR FORWARD AN E-MAIL MESSAGE If the message is not on the screen, press Menu, Message, Text messages and Inbox (Menu 0 > 1 > 1 > 1). Select the message you received. Press Read. Press Options. Scroll to Forward or Reply. Press OK. Scroll to As e-mail.
17 Use your phone as a fax/ modem Note: This feature is available only if your service provider supports digital data and fax calls. Digital data and fax calls may also require that you subscribe to these additional services. Your phone can function as a wireless fax/modem when connected to your PC or laptop computer via the optional DLR-3P Data Cable.
You may consider creating a separate set of dialing properties to use when your phone is connected, rather than changing any existing settings. Please refer to the documentation or online help files for your data or fax application when creating new dialing configurations, or modifying existing settings.
The appropriate data or fax software must be running. Consider setting your data or fax software to answer incoming calls automatically. This setting allows you to receive calls while you are away from your PC. When you receive a call, Data call or Fax call appears and an alert sounds.
Page 94
Use your phone as a fax/modem When the DLR-3P is connected and incoming data or fax calls have been pre-arranged, your phone will display Data only or Fax only, along with the d or f status indicator at the Start screen. Once your phone is preset for either data or fax reception, you cannot receive incoming voice calls.
18 Minibrowser Note: This feature is available only if your service provider’s network supports wireless internet access. Your service provider may also require that you subscribe to this additional service. For more information, contact your service provider. • ABOUT THE MINIBROWSER Warning: Your phone must be switched on to use the Minibrowser.
• LAUNCHING THE MINIBROWSER The first time you launch the Minibrowser, you go through a security setup process that takes 3 to 5 minutes (follow the on-screen prompts). From the start screen, press Menu, then scroll to Minibrowser. The following message appears to remind you that you may be billed for the connection time.
• Version: Show the version of Minibrowser software. • Advanced: Change server and encryption settings. • Exit Minibrowser: Exit the Minibrowser. • Switch off!: Turn off the phone. About web page content The following items may appear on web pages: •...
SELECTION KEYS To navigate to different screens or select special functions, use the selection keys. The function of each selection key can change with each page and depends on each highlighted item. • (Left selection key) - Usually selects the highlighted item, but its function may change depending on what you are doing.
GO TO A BOOKMARKED PAGE From the Home Page, scroll to Bookmarks, then press Select. A list of your bookmarks appears. Select the bookmark that represents the page you want go to, then press Select. Tip: A number is associated with each bookmark in the bookmark list. To quickly go to a bookmark, press and hold the appropriate number key.
Page 100
• On connection: Before connecting to the web, your phone prompts you to confirm your choice. • On exit: Before exiting the Minibrowser session, your phone prompts you to confirm your choice. Scroll to the appropriate option, then press OK. Tip: To prevent unintentional exiting of the Minibrowser session (such as when pressing repeatedly to move back through previously viewed pages), select Both or On exit.
19 Use your personal assistant Your phone can be your personal assistant. It can wake you up in the morning and remind you of meetings, birthdays, and tasks. You can check the current time and calculate a tip at dinner. With a calendar, clock, alarm clock, calculator, and phone book, you have everything you need to keep track of your life.
Create a calendar note This option lets you create a note with one of four categories: Reminder, Call, Meeting, or Birthday. You can set an alarm for any calendar note. Go to the day you want, and press Options. Scroll to Make note, and press Select. Scroll to the type of note you want to create (Reminder, Call, Meeting, or Birthday).
Page 103
Enter the date when you need to make this call, and press OK. The Time field appears. Enter the time when you need to make this call. Using the hh:mm format. Press OK. Select am or pm, and press OK. Set alarm for the note? appears. Note: Step 4 appears only if you have selected the am/pm format.
Page 104
Enter the date when you want the alarm to sound, and press OK. The Alarm time field appears. Enter the time when you want the alarm to sound. Use the hh:mm format. Press OK. Select either am or pm, and press OK. Note: Step 6 appears only if you selected the am/pm format.
Press Select. If you have more than one note for the day, scroll the list. You have several Options: • Erase - Erase the note. • Edit - Edit the note. • Move - Move the note to a different date. View all notes To view all notes in your calendar, press Options.
When a calendar alarm goes off • To shut off the alarm, press OK. • To shut off the alarm for 10 minutes, press Postpone. The alarm can be postponed 10-minute increments for up to 90 minutes. Set the calendar date Press Options.
• To listen to the tone, press Options, scroll to Playback, then press OK. The phone plays the tone. To stop playing the tone, press Quit or • To discard the tone immediately after you receive it (before you press Options), press Exit or pressed Options, scroll to Discard, then press OK.
The Alarm on message appears. On the Start screen, the alarm icon ) appears, indicating that the alarm is set. Turn off the alarm clock when it rings When the alarm clock rings: • Press Stop to turn it off. If the phone was off when the alarm sounded, the phone asks if you want to keep the phone on.
20 Games Your phone includes four games: Memory/Pairs*, Snake, Logic, and Dice. Press Menu 6 (Games). Scroll until the name of the game you want to play is highlighted. Press Select. Scroll to the appropriate menu item. Press Select: • New game - a new game •...
the snake grow longer. If the snake hits its own tail or the wall, the game is over. The longer the snake, the higher the score. If you choose a higher level of play, the snake moves faster. • LOGIC At the beginning of the game, several pictures appear at the top left corner of the screen.
21 Reference information • BATTERIES, CHARGERS, AND ACCESSORIES This section provides information about the phone’s batteries, accessories, and chargers. Be aware that the information in this section is subject to change as the batteries, chargers, and accessories change. This phone is intended for use when supplied with power from an ACP-7U, an ACP-8U, LCH-8, or an LCH-9.
Page 112
An example of short-circuiting could occur if you carry a spare battery in your pocket or purse, where the battery could come into contact with such objects like a coin. Short-circuiting could damage either the battery or the connecting object. Leaving the battery in hot or cold places, such as in a closed car in either summer or winter conditions, will reduce the capacity and lifetime of the battery.
• IMPORTANT SAFETY INFORMATION This section provides additional safety information. A brief overview of safety can be found in “For your safety” on page 1. Traffic safety Do not use a hand-held telephone while driving a vehicle. If you are using a hand-held phone, park the vehicle before conversing.
Page 114
PACEMAKERS Pacemaker manufacturers recommend that a minimum separation of six inches (20 cm.) should be maintained between a handheld wireless phone and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with the independent research by and recommendations of Wireless Technology Research.
POSTED FACILITIES Switch your phone off in any facility where posted notices so require. Potentially explosive atmospheres Switch off your phone if you are in any area that has a potentially explosive atmosphere, and obey all signs and instructions. Sparks in such areas could cause an explosion or fire, resulting in bodily injury or even death.
Reference information Switch off your phone before boarding an aircraft. The use of wireless telephones in an aircraft may be dangerous to the operation of the aircraft, disrupt the wireless telephone network and may be illegal. Failure to observe these instructions may lead to the suspension or denial of telephone services to the offender, or legal action, or both.
Page 117
Depending on your provider, you may not be able to use the emergency key 9 feature if any of the following conditions exist: • Emergency key 9 feature is not activated (“Use emergency key 9” on page 53). • Keyguard is active (“Use Keyguard to lock the keypad” on page 58). •...
Page 118
Reference information Radio frequency (RF) signals THIS MODEL PHONE MEETS THE GOVERNMENT’S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S.
Page 119
For body worn operation, to maintain compliance with FCC RF exposure guidelines, use only Nokia approved accessories. When carrying the phone while it is on, place the phone in the specific Nokia belt-clip that has been tested for compliance. Use of non-Nokia-approved accessories may violate FCC RF exposure guidelines and should be avoided.
• Use only the supplied antenna. Removal or replacement of the antenna by anyone other than a Nokia authorized service center is an unauthorized modification and invalidates the warranty, can damage the phone, and may violate regulations governing radio devices.
The use of any other types may invalidate any approval or warranty applying to the phone, and may be dangerous. Note: For availability of approved accessories, please check with your authorized Nokia dealer. [ 112 ]...
• BATTERY This section provides information about the phone’s battery. Be aware that the information in this section is subject to change. Several rechargeable batteries are available for use in your phone. The battery model number is on the battery label which is visible when the battery is removed from the phone.
The chargers and accessories that are described in this section are available for your phone. Contact your dealer for details. Also, refer to the accessories brochure that was included in your sales package for the entire line of Nokia Original Accessories. Digital Analog...
Page 124
Reference information Standard Travel Charger (ACP-7U) This lightweight (187g) and durable AC charger can be used with all battery options. To use the Standard Travel Charger, plug it into a wall outlet and connect the lead from the charger to the base of your phone. Rapid Travel Charger (ACP-8U) This lightweight (110g) AC charger can be used with all battery options.
Page 125
Rapid Cigarette Lighter Charger (LCH-9) You can charge your phone’s battery from your vehicle battery by using the Rapid Cigarette Lighter Charger (LCH-9). Calls are possible during charging. A green light indicates the charger is ready for charging (when not charging) or finished charging (if it has been charging).
Page 126
The Compact Desktop Charging Stand provides mounting for both the phone and a spare battery. Plug the charger into a wall outlet and connect the connector to the back of the Compact Desktop Charging Stand. Place your phone and/or a spare battery in the stand to begin battery charging. When the phone is charging, no lights are displayed on the stand (unless a spare battery is being charged, too);...
• TROUBLESHOOTING This section provides a table that lists some of the most commonly- encountered problems and provides possible solutions. Problem My phone The charger and the phone isn’t are not properly connected. charging. The charger is not properly plugged in. The battery may be too hot or cold.
Page 128
Problem Possible cause I can’t listen You have not set up your to my voice voice mailbox with your messages. service provider. (continued) You have not saved your voice mail number in your phone. The voice mail number you have saved is incorrect. You have forgotten your password or are entering it incorrectly.
22 Frequently Asked Questions (FAQ) This section provides answers questions users frequently ask. Some answers tell you to use shortcuts, refer to “Navigate menus” on page 16. Q. How do I lock my phone? A. Press Menu 4 > 3 > 2 > 1 (Menu > Settings > Security settings > access codes), enter your lock code, scroll to On.
Page 130
Q. How do I unlock the keypad (Keyguard)? A. There are two ways to unlock the keypad: • Press and hold • Press Unlock and Q. How do I make the ringing louder? A. Press Menu 3 > 1 > 2 > 2 (Menu > Profiles > Normal > Customize > Ringing volume), then choose a volume level.
Page 131
Q. How do I find my phone’s model number? A. Turn your phone off, then remove the battery from the back of the phone. Your phone’s model number is listed on the sticker that appears on the back of the phone, after the word “Model”. Q.
Page 132
Q. Can I receive a data or fax call while a voice call is in progress? A. Yes. Your phone will display either Data call or Fax call to indicate the type of call. If the cable is not connected, the phone will display Fax call, connect data cable or Data call, connect data cable.
23 Technical Information Weight Size Frequency Range Lowband Highband Transmitter Output Power Battery Voltage Charging current Operating Temperature Number of Channels Number of NAMs Memory Locations Memory Capacity Data/fax transmission rate Fax type Note: *Although your phone is capable of data transmission rates up to 56 Kbps, your actual transmission rate may vary, due to your service provider’s network.
No charge will be made to the Consumer for any such parts. Nokia will also pay for the labor charges incurred by Nokia in repairing or replacing the defective parts. The limited warranty does not cover defects in appearance, cosmetic, decorative or structural items, including framing, and any non-operative parts.
Page 135
6. The Consumer shall bear the cost of shipping the Product to Nokia in Melbourne, Florida. Nokia shall bear the cost of shipping the Product back to the Consumer after the completion of service under this limited warranty. 7. The Consumer shall have no coverage or benefits under this limited...
Page 136
The Consumer will be responsible for any expenses related to reinstallation of the Product. e) Nokia will repair or authorize the repair of the Product under the limited warranty within 30 days after receipt of the Product by Nokia or an Nokia authorized service center.
Page 137
13. This is the entire warranty between Nokia (or NMP) and the Consumer, and supersedes all prior and contemporaneous agreements or understandings,...
Page 138
14. This limited warranty allocates the risk of failure of the Product between the Consumer and Nokia (or NMP). The allocation is recognized by the Consumer and is reflected in the purchase price of the Product. 15. Any action or lawsuit for breach of warranty must be commenced within eighteen (18) months following delivery of the Product.