Chapter 4: System Setup; Entering Bios Setup Program; Navigation Keys; Boot Sequence - Dell Precision 5570 Service Manual
Hide thumbs
Also See for Precision 5570:
- Service manual (145 pages) ,
- Setup and specifications (25 pages) ,
- Connection manual (11 pages)
Table of Contents
Advertisement
CAUTION:
Unless you are an expert computer user, do not change the settings in the BIOS Setup program.
Certain changes can make your computer work incorrectly.
NOTE:
Depending on the computer and its installed devices, the items listed in this section may or may not be displayed.
NOTE:
Before you change BIOS Setup program, it is recommended that you write down the BIOS Setup program screen
information for future reference.
Use the BIOS Setup program for the following purposes:
● Get information about the hardware installed in your computer, such as the amount of RAM and the size of the hard drive.
● Change the system configuration information.
● Set or change a user-selectable option, such as the user password, type of hard drive installed, and enabling or disabling
base devices.
Entering BIOS setup program
About this task
Turn on (or restart) your computer and press F2 immediately.
Navigation keys
NOTE:
For most of the System Setup options, changes that you make are recorded but do not take effect until you restart
the system.
Table 2. Navigation keys
Keys
Up arrow
Down arrow
Enter
Spacebar
Tab
Esc
Boot Sequence
Boot Sequence allows you to bypass the System Setup–defined boot device order and boot directly to a specific device (for
example: optical drive or hard drive). During the Power-on Self Test (POST), when the Dell logo appears, you can:
● Access System Setup by pressing F2 key
System setup
Navigation
Moves to the previous field.
Moves to the next field.
Selects a value in the selected field (if applicable) or follow
the link in the field.
Expands or collapses a drop-down list, if applicable.
Moves to the next focus area.
NOTE:
For the standard graphics browser only.
Moves to the previous page until you view the main screen.
Pressing Esc in the main screen displays a message that
prompts you to save any unsaved changes and restarts the
system.
4
System setup
57
- Quick Links:
- Solid-State Drive
- Entering Bios Setup Program
Hide quick links:
Advertisement
Table of Contents
