Table of Contents
Advertisement
Replacing the display assembly
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Procedure
1
Align the screw holes on the display hinges with the screw holes on the
computer base.
2
Replace the screws that secure the display hinges to the computer base.
3
Route the display cable through its routing guides on the computer base.
4
Route the antenna cables through its routing guides and slide the
antenna cables through the slot on the computer base.
5
Close the display and turn the computer over.
Post-requisites
1
Follow the procedure from step 3 to step 10 in
board".
2
Follow the procedure from step 2 to step 6 in
3
Replace the keyboard.
4
Replace the
wireless
5
Replace the
memory
6
Follow the procedure from step 3 to step 5 in
7
Replace the
base
8
Replace the battery.
computer. After working inside your
card.
modules.
panel.
After working inside your
"Replacing the system
"Replacing the palm
"Replacing the hard
rest".
drive".
73
Advertisement
Table of Contents
