Table of Contents
Advertisement
Power Saver Timer
Sets the time for transition to Power Saver Mode 2.
Mode 2
Control Panel Tone
Specifies whether to enable the tone that is emitted when the operator panel input is correct.
Invalid Key Tone
Specifies whether to enable the tone that is emitted when the operator panel input is incorrect.
Machine Ready Tone
Specifies whether to enable the tone that is emitted when the printer becomes ready.
Job Completed Tone
Specifies whether to enable the tone that is emitted when a print job is complete.
Fault Tone
Specifies whether to enable the tone that is emitted when a job ends abnormally.
Alert Tone
Specifies whether to enable the tone that is emitted when a problem occurs.
Out of Paper Alert Tone
Specifies whether to enable the tone that is emitted when the printer runs out of paper.
Low Toner Alert Tone
Specifies whether to enable the tone that is emitted when toner or some other consumable is low.
Specifies whether to enable the tone that is emitted when the operator panel screen returns to the default by scrolling the loop
Base Tone
menu.
Specifies in seconds the amount of time the printer should cancel for a job stops abnormally. The print job is cancelled if the time-
Fault Time-Out
out time is exceeded.
Specifies in seconds the amount of time the printer should wait for data to arrive from the computer. The print job is cancelled if
Time-Out
the time-out time is exceeded.
Panel Language
Sets the language to be used on the operator panel.
Auto Log Print
Specifies whether to automatically print a log of completed jobs after every 20 jobs.
Print ID
Specifies where to print the user ID on the output paper.
Print Text
Specifies whether the printer outputs PDL data, which is not supported by the printer, as text when the printer receives it.
Banner Sheet Insert
Specifies where to insert a banner sheet.
Position
Banner Sheet Specify
Specifies which input tray to use to insert a banner sheet.
1
Tray*
Specifies whether to allocate RAM for the file system for the Secure Print and Proof Print features.
RAM Disk
This item is only available when the 512 MB, or higher, optional memory is installed.
2
Specifies how the odd last page is printed when using duplex printing.
Odd Page 2 Sided*
Specifies whether or not to use another size paper when the paper that is loaded in the specified tray does not match the paper
Substitute Tray
size settings for the current job.
mm / inch
Specifies the measurement unit to be used on the operator panel screen as either mm or inches.
1
*
This item is only available when the optional 250-sheet feeder is installed.
2
*
This item is only available when the optional duplexer is installed.
USB Settings
Purpose:
To change printer settings affecting a USB port.
Values:
Port Status Specifies whether to enable the USB interface.
PCL Settings
Purpose:
To change the printer settings that only affect jobs using the PCL emulation printer language.
Values:
Paper Tray
Specifies the input tray.
Paper Size
Specifies the paper size.
Custom Size - Y
Specifies the length of custom size paper.
Custom Size - X
Specifies the width of custom size paper.
Orientation
Specifies how text and graphics are oriented on the page.
2 Sided
Sets duplexing as the default for all print jobs. This item is only available when the optional duplexer is installed.
Font
Specifies the font from the list of registered fonts.
Symbol Set
Specifies a symbol set for the specified font.
Font Size
Specifies the font size for scalable typographic fonts.
Font Pitch
Specifies the font pitch for scalable monospaced fonts.
Form Line
Specifies the number of characters in a line.
Quantity
Sets the number of copies to print.
- Quick Links:
- Troubleshooting
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
